MobiFlight Community Support

Hello everyone, I am new here and I am happy to join this community. So far so good with Mobiflight until I ran into issues with more than 1 switch and dataref with the Zibo AFDS Panel.

AFDS AP P/RST switch and light.
I created an input for the led on the AP P/RST switch, found the correct data ref. laminar/B738/annunciator/ap_disconnect1. Works fine the light starts blinking like and when it shoud.

Now onto the switch part. I created an input and again I found the correct data ref :laminar/B738/push_button/ap_light_pilot
when I press the sw on the flight simulator, the data ref in the search box turns yellow and the lights on the simulator stop blinking and turn off
When I repeat this time with the real switch, again the data ref in the search box turns yellow but the light does not come off and continues blinking and the switch on the simm doesn't move

I've had the same problem with the test switch in the same panel

I suspect I have the wrong data ref and I have checked and rechecked over and over again. These are the only data refs I can find. I am searching with the Data ref tool with "all" and "ch". It is the only data ref that come up when I press the button on the sim. Has anyone have issues like this? thank you in advance