MobiFlight Community Support

Hi!

First post here and I´m needing help for following.

I´ve got a simple 320 home cockpit build with megas+mobiflight+msfs2020 with FBW a32nx. Got almost everything working as I want (for now).

I´ve been using preset A32NX_KOHLSMAN_SETTING

I can´t figure out how to make the efis barometer to show:
STD when in std mode.
When in inhg mode it´s not showing the dot between digits 29.92 is shown as 2992.

Been playing around with different things found from hubhop but cant figure it out, I dont have much experience with MF so help needed.

Can anyone help with stepbystep instructions how to get it working?

Best regards,
Toni

Hi there,

Maybe you have already solved the problem, I just read your post, but here is my solution anyway:
I haven't built an EFIS yet, but demonstrating it on the ALT display of the FCU

I haven't got it solved, tried with your helps but unsure how to do it, I dont have the modify tab in my mobiflght?

Guess I would need instructions for dummies in this case, starting from the very begining how to setup the output correctly in this case.

Ok here are the steps

Download latest Mobiflight https://www.mobiflight.com/en/download.html

Follow the pictures below



















Regards
AlbEagle

First, a big thanks for helping me out!

There was something wrong with the A32NX_KOHLSMAN_SETTING, it never came back with the value 99. Probably I have at somepoint messed it up.

So I made a new output and got it working BUT

The inhg value when using the round ($,2) transformation gives a value without decimals. Should be 30.00 -> shows as 0030 on my screen, and 30.10 shows 030.1. Without the transformation it works but the value changes different from the ingame value. (Hope you understand from my explanations)

The mobiflight version I have is 9.7.1, it doesn't give me new updates

If you have left padding checked, you should uncheck it and choose 0 instead of space. Check the picture below.

There are some issues though with 30.00 showing 3000 and another not showing 0 in front of the number, for a better solution there are four configs needed, you can check the other post.

The closest would be with 4 rows of data, two of them only reading the status and the other two showing the results with some preconditions.

If you are interested, let me know.