MobiFlight Community Support

Welcome to the forum for MobiFlight! Feel free to reach out to the community in case you have questions, issues or just want to share great ideas or details about your latest home cockpit project.

You like MobiFlight? Donate via PayPal and support the MobiFlight development. Thanks!

05/03/2024 - This forum is read-only

The community support for MobiFlight has moved exclusively over to our Discord server. Register for free and enjoy more interactive functions like image and video upload, voice chat. More than 7,000 registered users around the world make it a great experience!

See you on our MobiFlight Community Discord server.

A HUGE Thank You to everyone who participated in the forum, especially obviously to Pizman and Stephan who did an outstanding job over so many years providing an incredible service to the MobiFlight community.

The forum is still providing a lot of good content, hence we keep this information accessible.

Message #24675

simpilot365

Posts: 7

Hi folks, i am attempting to get the 7 segment display to work correctly.
The HDG works correctly below 99. When it hits 100, the display shows 001.
When i dial in 102 , the display shows 201

How do i correct this?

I am using the FSUIPC preset Autopilot - AP Heading Value
0x07CC
Int 2
Round(($*360)/65536,0)

Compare <0
set it to 360+$

Cheers

[Last edited by simpilot365, 2021-12-25 08:12]

2021-12-25 08:01

Message #24678

StephanHo

Moderator

From: EDDG, Germany

Posts: 1867

Supporter

Hi,

if your display shows the reverse order of the digits, then go to this config, click edit (...) and choose the display tab. Here you can hook "Reverse digits". That should solve your problem.

Grüße,
Stephan (Time: UTC+2)

2021-12-25 12:23

Message #24715

pizman82

Moderator

From: ETSI, Germany

Posts: 6010

Supporter

simpilot365:
Hi folks, i am attempting to get the 7 segment display to work correctly.
The HDG works correctly below 99. When it hits 100, the display shows 001.
When i dial in 102 , the display shows 201

Here something is strange !!!

At first i also think like Stephan..... So there is just a reverse Diggit Problem.....
BUT
If it is reversed as expected, then also the area below 100 must be reversed!
if 100 = 001 and 102 = 201 ........ Then e.g. 79 must be shown as 97 or 62 must be 26 .

Reversed means always reversed !

Good Luck !

2021-12-29 20:54