MobiFlight Community Support

Hi together,

for all users of the MSFS2020. Here is HubHop:

HubHop is an API which consolidates Microsoft Flight Simulator 2020 variables and events and provides unique, understandable and standardized events and variables.

Here are over 4000 presets for all the aircrafts saved in HubHop. Also have a look on the dashboard!

You are searching for a varable or an event for MSFS2020? No problem. Go to https://hubhop.mobiflight.com/#/. You do not need an account!

You have figured out a variable or an event and want to share it with the community? No problem! Go to https://hubhop.mobiflight.com/#/, create an account and enter the new data(s) you have figured out.

Have fun!

Hello my friend.

I´ve a great problem with the WASM in FS2020 I want to use the PUSH and PULL of VS in the A320 FBW.

I read that (>K:A32NX.FCU_VS_PULL) is for the PULL of VS, but when I use MB, I put it in MSFS2020 events, but I can´t make it work.

I do not know if I have to put K:A32NX.FCU_VS_PULL or only A32NX.FCU_VS_PULL. Also I wrote it in presets of MB, but it doesn´work. When I use CONSOLE in FS2020 and I have in the display one PULL I receive the next:

WASM: event triggered: A32NX_FCU_TO_AP_VS_PULL.

In the presets of MB it doesn´t exist. I wrote it editing the file, but nothing work. Please could you help me?

I hope that you unterstand my problem.

Best regards

EVERYONE,
In case you didn't notice, there is a new tool in Hubhop to generate MSFS2020 RPN code for potentiometers. You just select the device output range (arduino or joystick or custom) and the msfs event input range (i.e. throttle, flaps, trims, lights, etc). The tool will generate the RPN statement that you can copy directly to your custom input box. If your pot requires a reverse scale, there is an option to adjust the code for this.

Please visit the Hubhop tool page here:
https://hubhop.mobiflight.com/#/tools

Regads
Jaime Leon

Tarde, pero gracias Jaime.

初めましてMobiFlightさんには感謝しております
初めての質問でここでよいのか失礼ですがよろしくお願いします
質問1、ですがMobiFlightのInputsettingのActionTypeにMSFS2020-custominputを設定しようとすると
前は登録できたのですが「オブジェクト参照がオブジェクトインスタンスに設定されていません。」とinputConfigWizard errorが
でてしまい設定できなくなりました????既に設定できているものは正常に動作しています!どうすればもとのように入力できるでしょうか
質問2、B747-8iMCPのHDGSelボタンをarduinomegaのボタンでしたいのですが
現在MSFS2020-custominputプルダウンリストにHDG_Selボタンありません!!
このHDG_Selボタンを押すとPFDにHDGSELが表示されるようVender=Asobo Aircraft=747-8i の中に増やしていただきたいのですが
MobiFlightの「クリエイター」 ステファン・ホーさんがMSFS2020　Asobo関係で指導されているようですがよろしくお願いします

@ Mobi_toi

Badly the Forum Software not be able to handle your text ( i expect Chineese or Japaneese)

OR I´m not be able to translate it myself

Please ask your question in ENGLISH ( Use Google translator)

then we can help you !

Sincerest apologies
I converted it to English on Google, so thank you.
Excuse me if this is my first question, but thank you.
Question 1, but when I try to set MSFS2020-custominput to ActionType of Input setting of Mobi Flight
I was able to register before, but the inputConfigWizard error says "Object reference is not set for the object instance."
I can't set it anymore ???? What I have already set is working properly! How can I enter it as before?
Question 2, I would like to use the HDG Gel button on the B747-8iMCP as the button on the arduino mega.
Currently there is no HDG_Sel button in the MSFS2020-custominput pull-down list !!
I would like to increase the number in Vender = Asobo Aircraft = 747-8i so that HDGSEL is displayed in PFD when this HDG_Sel button is pressed.
It seems that Mobi Flight's "creator" Stephen Ho is instructing in relation to MSFS2020 Asobo. Thank you.

Hi Again

At first.... the Creator from Mobiflight is "Sebastian" a.k.a. "Doc Moebius".
StephanHo and myself are just members of the team !

About your question.....
Here DISCORD is the much more better adress. There are FS2020 Power Users like "Rofller", "JaimeLeon" or "Tuomas"
Pretty sure they can support you and awnser all your questions directly.


Basic help:
1. There was a change within the last versions of MF. Maybe a Restart of Sim ( After you Updeate MF) is needed one time, so the Mobiflight WASM Module is get updated.

2. If a Event is missing in the List you have 2 ways.
A ) Search for same event type in generic. For example Heading Select ( Heading Hold) is normaly a genaric Event. So it should be there.

B ) if a needed Event really is not listed ( normaly all Events of STOCK Aircrafts are in the list already) THEN you need to figure out this event by hand.
Check our Youtube Guides.
You need to enable the DEV Mode in the Sim and you check that Database, what event is used when you press the virtual Button.
NOTE: You can also ask on Discord to the advanced users for help. Pretty sure they will support you to find out the missed event!

Thank you for your quick response
I will do it according to the instructions
thank you

Thank you for your help
YouTube https://www.bilibili.com/video/BV18p4y147HA/
There was a Console Log operation of Fusui pc7 in the latter half of, so I tried TRY
result
EVENT: Cntrl = 68065 (0x000109e1), Param = 2 (0x00000002) HEDING_SLOT_INDEX_SET
EVENT: Cntrl = 68065 (0x000109e1), Param = 1 (0x00000002) HEDING_SLOT_INDEX_SET
Event was found
Wouldn't it be possible if you could add this to the HubHop preset list?
I would like to contact FS2020 power users "Rofller", "Jaime Leon" and "Tuomas".
I've never done DISCORD, so I'd like to know how to ask directly.
please

1. Meanwhile we get another rare reports about a problem with the "Custom Input" System....
Pretty sure this will be fixed in the next release or patch.
For ME the issue warning pops up, BUT i be able to press "Continue" and make my setings as expected.

2. About Comunication.
As i said. These guys are normaly not in the forum. But i will tell them to check this.

3. About Event.
On my first view the "Index Slot" is not what we need.
Maybe the Pros can build a improvisional Input here.... But for me it looks like Asobo use a B Event for this feature.
And B Events are still blocked for 3rd Party AddOns. So Mobiflight ( and also all others) are blocked to use this by Asobo policy.

Hi again.
After a little testing.....

We find out that Inputs :

0 (>L:AP_HEADING_HOLD_ACTIVE) ( I think thats SEL Mode)
1 (>L:AP_HEADING_HOLD_ACTIVE) ( i think thats "HOLD" Mode)

Its improvisional. I not know about Side Effects and if it do what it should.
But on first view it looks good.

Please check if this is waht you need.

UPDATE:

Forget the last posting....
Jaime Leon solve this.

HubHop now include 4 new Input Events for the HDG Selector.
Just sort it to "B747-8i" then you see them !

2022/03/24 Jaime Leon puts [Autopilot Heading Select Inner Knob Press] on HubHopList
He put it in \ (^. ^) /
Thank you thank you
However, by all means, "The object reference is not set in the object instance." And the inputConfigWizard error is displayed.
I can't set it even if I press "Continue" (+д+)
I would like to wait until it will be fixed in the next release or patch
thank you

I know you not like Discord.....
But i can not help without see your screen.

Yes there is a bug that occure in this warning.... But your the first user i meet who not be able to solve this by ignore the Popup and press continiue.

Also the Text of the warning is strange. It sound to me you have a different pproblem maybe that can be fixed by overview your settings.

So mmy offer.... Join Discord and talk to me, Sebastian or the other guys.... Hopefully we can solve this.
Maybe your lucky and the next patch fix it overall.... But maybe your problem is different and also remains with the hotfix.

So..: Contact us if this problem remains and you like to invest some time for solving it !