MobiFlight Community Support

Welcome to the forum for MobiFlight! Feel free to reach out to the community in case you have questions, issues or just want to share great ideas or details about your latest home cockpit project.

You like MobiFlight? Donate via PayPal and support the MobiFlight development. Thanks! 

Posts: 6
I am finishing a PMDG 737 overhead but having a problem with setting up some annunciators
The fuel panel in the bottom left has 6 Low pressure annunciators
Aft engine 1 and 2 646C
Forward engine 1 and 2 646A
Crossfeed centre Left and Right 646E
How do i set these up in the latest mobiflight 8.2 for all 6 to work correctly
What are the offsets for each annunciator and byte settings as i dont understand the Pmdg list when it says Size 2 Byte x2
Please help
2021-06-22 19:33
From: EDDG, Germany
Posts: 1819
Hi Gonsey,

if you see a [2] that means that there are two different offsets for these annunciators.

Try 0x646A for the 1st LED and 0x646b for the 2nd
Same for 0x646C and all other offsets where you see a [#]
Stephan (Time: UTC+1)
2021-06-22 22:11
From: ETSI, Germany
Posts: 5501
Just to give tha last important information...... the Counting system is HEXADecilmal.......

So it´s 0,1,2,3,4,5,6,7,8,9,A,B,C,D,E,F,

E.g. The Offset 6519 .... Here the "next" is 651A --------------- Or 651F ..... Here the next is 6520

Hint: Use the Windows Calculator to get the right numbers if you not know the hexadecimal System !
Good Luck !
2021-06-22 23:17