MobiFlight Community Support

I'm struggling with the PIN Number that I have to assign on the MobiFlight Module Dialogue. The double PIN Row on the narrow side of the Mega is easy, because here the printed PIN numbers on the Board are identival to the physical Pin Numbers of the Arduino. But what about the digital Pins 1 - 21? Or whats about the Analog Inputs, that should also be available as digital inputs/outputs with the latest release. Are these Pins (in case of the digital input/outputs) numbered according to the printed numbers on the Board, on in physical Order? I have no idea what numbers to use for the analog Pins of the Arduino.

Well, I could figure this out by try and error. But unfortunately currently I don't trust my own hardware project, and I'm also not very confident with some of the Mobilflight configurations. So it would good if I could at least get rid of one uncerrtainty while setting up my project.

Hi

What do you mean with Digital Pins 1-21 ?? They are numberd same way like the Double Row.
So e.g. PIN 5 on Mega is also PIN 5 in Mobiflight !






Important Notes:

Pin0 and Pin1 are not useable.... Let them EMPTY on your Boards.... Also not assign them In Mobiflight ( Whatever it should be already not possbile. Normlay they are still miss in the dropdwons if all is correct)

The ANALOG Pins simply are added "above" .
Dig Pins are numbered 0-53 ..... So logical AnalogPin A0 is Pin 54 in MF and so on.

54 A0
55 A1
56 A2
57 A3
58 A4
59 A5
60 A6
61 A7
62 A8
63 A9
64 A10
65 A11
66 A12
67 A13
68 A14
69 A15

Thanks! That's what I was looking for.

Hello, why pin0 and pin1 are not usable? In the future it's possible?

Thanks