MobiFlight Community Support

I knew better but mobiflight said there was an update so i did it and it lost one of my two mega's. everything was working before this and I should not have clicked update. this happen the last update and it finally started working again. What happens is after the update when I open the program it says there is an unknown device and if i want to update it. I click yes and it says its finished and I click ok. When you go into Extras and the devices it only has one the other one says unknown. you cant change the name if you tell it to upload previous config it crashes. If you tell it to upload config it says there is an error. It does this even after using arduino program and uploading eeprom to it. I will copy and past the debug if it helps anyone. also is there a way to lock other boards so mobiflight can not erase what's on them? I have a arduino leo board for my throttle setup and after every update it finds that board and erases my sketch I have on it. I hope someone can help me get it working. I just had everything the way I like it. I have also moved it to a different port to see if that helps.

1/22/2021 1:39:30 PM(669): Something went wrong when flashing with command
"Arduino\hardware\tools\avr\bin\avrdude" -C"Arduino\hardware\tools\avr\etc\avrdude.conf" -patmega2560 -cwiring -P\\.\COM3 -b115200 -D -Uflash:w:"C:\Users\myfyn\Downloads\firmware\mobiflight_mega_1_9_7.hex":i
1/22/2021 1:39:30 PM(661): Firmware Upload Exit Code: 1
1/22/2021 1:39:30 PM(504): RunAvrDude : -C"Arduino\hardware\tools\avr\etc\avrdude.conf" -patmega2560 -cwiring -P\\.\COM3 -b115200 -D -Uflash:w:"C:\Users\myfyn\Downloads\firmware\mobiflight_mega_1_9_7.hex":i
1/22/2021 1:39:30 PM(498): RunAvrDude : "Arduino\hardware\tools\avr\bin\avrdude"
1/22/2021 1:39:30 PM(491): MobiflightModule.disconnect: Already Disconnected Default at COM3
1/22/2021 1:39:30 PM(477): MobiflightModule.disconnect: Already Disconnected Default at COM3
1/22/2021 1:39:30 PM(471): ExecutionManager.AutoConnectStop:Stopped auto connect timer
1/22/2021 1:39:22 PM(675): ExecutionManager.autoConnectTimer_Tick(): No Sim running
1/22/2021 1:39:21 PM(675): Set Debug in ComboBox: logLevelComboBox
1/22/2021 1:39:12 PM(685): ExecutionManager.AutoConnectStart:Started auto connect timer
1/22/2021 1:39:12 PM(679): ExecutionManager.autoConnectTimer_Tick(): No Sim running
1/22/2021 1:39:12 PM(661): No updates necessary. Your version: 7.10.0.15, Latest version: 7.10.0.15
1/22/2021 1:39:11 PM(719): ExecutionManager.autoConnectTimer_Tick(): No Sim running
1/22/2021 1:39:11 PM(697): ExecutionManager.TestModeStop:Stopped test timer
1/22/2021 1:39:11 PM(689): Checking for updates
1/22/2021 1:39:04 PM(884): Something went wrong when flashing with command
"Arduino\hardware\tools\avr\bin\avrdude" -C"Arduino\hardware\tools\avr\etc\avrdude.conf" -patmega2560 -cwiring -P\\.\COM3 -b115200 -D -Uflash:w:"C:\Users\myfyn\Downloads\firmware\mobiflight_mega_1_9_7.hex":i
1/22/2021 1:39:04 PM(877): Firmware Upload Exit Code: 1
1/22/2021 1:39:04 PM(722): RunAvrDude : -C"Arduino\hardware\tools\avr\etc\avrdude.conf" -patmega2560 -cwiring -P\\.\COM3 -b115200 -D -Uflash:w:"C:\Users\myfyn\Downloads\firmware\mobiflight_mega_1_9_7.hex":i
1/22/2021 1:39:04 PM(716): RunAvrDude : "Arduino\hardware\tools\avr\bin\avrdude"
1/22/2021 1:39:04 PM(710): MobiflightModule.disconnect: Already Disconnected Default at COM3
1/22/2021 1:39:04 PM(697): MobiflightModule.disconnect: Already Disconnected Default at COM3
1/22/2021 1:39:04 PM(690): ExecutionManager.AutoConnectStop:Stopped auto connect timer
1/22/2021 1:38:45 PM(67): MobiflightModule.Config: Timeout. !InfoCommand.Ok. Retrying...
1/22/2021 1:38:41 PM(60): Save config: 14
1/22/2021 1:38:41 PM(34): Uploading config (Part): 1.35.Nav Bug Btn:9.2.3.4.5.0.VSI:9.8.9.10.11.0.Heading ind:
1/22/2021 1:38:41 PM(8): Uploading config (Part): 8.26.24.0.Heading Ind:1.22.Head ind bt:8.32.30.0.Nav bug:
1/22/2021 1:38:40 PM(981): Uploading config (Part): 9.14.15.16.17.0.air speed:9.18.19.20.21.0.RPM:
1/22/2021 1:38:40 PM(963): Reset config: 13
1/22/2021 1:38:40 PM(772): Uploading config: 9.14.15.16.17.0.air speed:9.18.19.20.21.0.RPM:8.26.24.0.Heading Ind:1.22.Head ind bt:8.32.30.0.Nav bug:1.35.Nav Bug Btn:9.2.3.4.5.0.VSI:9.8.9.10.11.0.Heading ind:
1/22/2021 1:37:40 PM(583): ExecutionManager.AutoConnectStart:Started auto connect timer
1/22/2021 1:37:40 PM(577): MobiFlightCache.RegisterModule(Default:COM3)
1/22/2021 1:37:40 PM(571): MobiFlightModule.GetInfo: Arduino Mega 2560, Default,n/a, n/a
1/22/2021 1:37:38 PM(565): MobiflightModule.Config: !InfoCommand.Ok. Init with empty config.
1/22/2021 1:37:36 PM(559): MobiflightModule.Config: Timeout. !InfoCommand.Ok. Retrying...
1/22/2021 1:37:34 PM(551): MobiflightModule.connect: Connected to Default at COM3 of Type Arduino Mega 2560 (DTR=>True)
1/22/2021 1:37:34 PM(535): Firmware Upload Exit Code: 0
1/22/2021 1:37:26 PM(63): RunAvrDude : -C"Arduino\hardware\tools\avr\etc\avrdude.conf" -patmega2560 -cwiring -P\\.\COM3 -b115200 -D -Uflash:w:"C:\Users\myfyn\Downloads\firmware\mobiflight_mega_1_9_7.hex":i
1/22/2021 1:37:26 PM(58): RunAvrDude : "Arduino\hardware\tools\avr\bin\avrdude"
1/22/2021 1:37:26 PM(51): MobiflightModule.disconnect: Already Disconnected Default at COM3
1/22/2021 1:37:26 PM(39): MobiflightModule.disconnect: Already Disconnected Default at COM3
1/22/2021 1:37:26 PM(33): ExecutionManager.AutoConnectStop:Stopped auto connect timer
1/22/2021 1:37:26 PM(15): Set Debug in ComboBox: logLevelComboBox
1/22/2021 1:37:24 PM(535): MobiFlightModule.GetInfo: MobiFlight Mega, MobiFlight Mega,1.9.7, SN-deb-218
1/22/2021 1:37:24 PM(482): MobiflightModule.Config: Timeout. !InfoCommand.Ok. Retrying...
1/22/2021 1:37:22 PM(476): MobiflightModule.connect: Connected to Default at COM6 of Type MobiFlight Mega (DTR=>True)
1/22/2021 1:37:22 PM(466): MobiFlightCache.RegisterModule(Default:COM6)
1/22/2021 1:37:22 PM(461): MobiFlightCache.connect: Clearing modules
1/22/2021 1:37:22 PM(456): MobiFlightCache.LookupAllConnectedArduinoModulesAsync: End
1/22/2021 1:37:22 PM(451): MobiflightModule.disconnect: Disconnected Default at COM3
1/22/2021 1:37:22 PM(386): MobiFlightModule.GetInfo: Arduino Mega 2560, Default,n/a, n/a
1/22/2021 1:37:20 PM(381): MobiflightModule.Config: !InfoCommand.Ok. Init with empty config.
1/22/2021 1:37:18 PM(494): MobiflightModule.disconnect: Disconnected MobiFlight Mega at COM6
1/22/2021 1:37:18 PM(435): MobiFlightModule.GetInfo: MobiFlight Mega, MobiFlight Mega,1.9.7, SN-deb-218
1/22/2021 1:37:18 PM(378): MobiflightModule.Config: Timeout. !InfoCommand.Ok. Retrying...
1/22/2021 1:37:18 PM(376): MobiflightModule.Config: Timeout. !InfoCommand.Ok. Retrying...
1/22/2021 1:37:16 PM(368): MobiflightModule.connect: Connected to Default at COM3 of Type Arduino Mega 2560 (DTR=>True)
1/22/2021 1:37:16 PM(366): MobiflightModule.connect: Connected to Default at COM6 of Type Arduino Mega 2560 (DTR=>True)
1/22/2021 1:37:16 PM(331): ExecutionManager.AutoConnectStart:Started auto connect timer
1/22/2021 1:37:16 PM(324): MobiFlightCache.LookupAllConnectedArduinoModulesAsync: Port not connected (COM9)
1/22/2021 1:37:16 PM(319): MobiFlightCache.LookupAllConnectedArduinoModulesAsync: Port not connected (COM23)
1/22/2021 1:37:16 PM(314): MobiFlightCache.LookupAllConnectedArduinoModulesAsync: Port not connected (COM21)
1/22/2021 1:37:16 PM(310): MobiFlightCache.LookupAllConnectedArduinoModulesAsync: Port not connected (COM16)
1/22/2021 1:37:16 PM(306): MobiFlightCache.LookupAllConnectedArduinoModulesAsync: Port not connected (COM14)
1/22/2021 1:37:16 PM(301): MobiFlightCache.LookupAllConnectedArduinoModulesAsync: Port not connected (COM13)
1/22/2021 1:37:16 PM(298): MobiFlightCache.LookupAllConnectedArduinoModulesAsync: Port not connected (COM12)
1/22/2021 1:37:16 PM(294): MobiFlightCache.LookupAllConnectedArduinoModulesAsync: Port not connected (COM11)
1/22/2021 1:37:16 PM(290): MobiFlightCache.LookupAllConnectedArduinoModulesAsync: Port not connected (COM10)
1/22/2021 1:37:16 PM(283): Checking for compatible module: VID_8087&PID_0029
1/22/2021 1:37:16 PM(279): Checking for compatible module: VID_413C&PID_2113&MI_01
1/22/2021 1:37:16 PM(275): Checking for compatible module: VID_413C&PID_2113&MI_00
1/22/2021 1:37:16 PM(271): Checking for compatible module: VID_413C&PID_2113
1/22/2021 1:37:16 PM(267): Checking for compatible module: VID_2A03&PID_8036&MI_02
1/22/2021 1:37:16 PM(263): Incompatible module skipped: Arduino Leonardo (COM7) - VID/PID: VID_2A03&PID_8036&MI_00
1/22/2021 1:37:16 PM(259): Checking for compatible module: VID_2A03&PID_8036&MI_00
1/22/2021 1:37:16 PM(255): Checking for compatible module: VID_2A03&PID_8036
1/22/2021 1:37:16 PM(251): Incompatible module skipped: Arduino Leonardo bootloader (COM8) - VID/PID: VID_2A03&PID_0036
1/22/2021 1:37:16 PM(247): Checking for compatible module: VID_2A03&PID_0036
1/22/2021 1:37:16 PM(244): Checking for compatible module: VID_294B&PID_1900
1/22/2021 1:37:16 PM(240): Checking for compatible module: VID_2672&PID_0042
1/22/2021 1:37:16 PM(236): Checking for compatible module: VID_2341&PID_8036&MI_02
1/22/2021 1:37:16 PM(232): Found potentially compatible module (Arduino Micro Pro by VID/PID): VID_2341&PID_8036@COM9
1/22/2021 1:37:16 PM(228): Found potentially compatible module (Arduino Micro Pro by VID/PID): VID_2341&PID_8036@COM14
1/22/2021 1:37:16 PM(225): Found potentially compatible module (Arduino Micro Pro by VID/PID): VID_2341&PID_8036@COM13
1/22/2021 1:37:16 PM(221): Found potentially compatible module (Arduino Micro Pro by VID/PID): VID_2341&PID_8036@COM12
1/22/2021 1:37:16 PM(217): Found potentially compatible module (Arduino Micro Pro by VID/PID): VID_2341&PID_8036@COM23
1/22/2021 1:37:16 PM(213): Checking for compatible module: VID_2341&PID_8036&MI_00
1/22/2021 1:37:16 PM(210): Checking for compatible module: VID_2341&PID_8036
1/22/2021 1:37:16 PM(206): Found potentially compatible module (Mega 2560): VID_2341&PID_0042@COM6
1/22/2021 1:37:16 PM(202): Found potentially compatible module (Mega 2560): VID_2341&PID_0042@COM3
1/22/2021 1:37:16 PM(198): Checking for compatible module: VID_2341&PID_0042
1/22/2021 1:37:16 PM(194): Checking for compatible module: VID_2109&PID_2813
1/22/2021 1:37:16 PM(191): Checking for compatible module: VID_2109&PID_0813
1/22/2021 1:37:16 PM(187): Incompatible module skipped: USB Serial Device (COM18) - VID/PID: VID_1D6C&PID_0103&MI_04
1/22/2021 1:37:16 PM(183): Checking for compatible module: VID_1D6C&PID_0103&MI_04
1/22/2021 1:37:16 PM(180): Incompatible module skipped: USB microphone - VID/PID: VID_1D6C&PID_0103&MI_02
1/22/2021 1:37:16 PM(176): Checking for compatible module: VID_1D6C&PID_0103&MI_02
1/22/2021 1:37:16 PM(172): Incompatible module skipped: webcam - VID/PID: VID_1D6C&PID_0103&MI_00
1/22/2021 1:37:16 PM(169): Checking for compatible module: VID_1D6C&PID_0103&MI_00
1/22/2021 1:37:16 PM(165): Checking for compatible module: VID_1D6C&PID_0103
1/22/2021 1:37:16 PM(162): Found potentially compatible module (Arduino Micro Pro by VID/PID): VID_1B4F&PID_9206@COM10
1/22/2021 1:37:16 PM(158): Found potentially compatible module (Arduino Micro Pro by VID/PID): VID_1B4F&PID_9206@COM16
1/22/2021 1:37:16 PM(154): Found potentially compatible module (Arduino Micro Pro by VID/PID): VID_1B4F&PID_9206@COM11
1/22/2021 1:37:16 PM(150): Found potentially compatible module (Arduino Micro Pro by VID/PID): VID_1B4F&PID_9206@COM21
1/22/2021 1:37:16 PM(146): Checking for compatible module: VID_1B4F&PID_9206&MI_00
1/22/2021 1:37:16 PM(142): Checking for compatible module: VID_1B4F&PID_9206
1/22/2021 1:37:16 PM(138): Checking for compatible module: VID_1A40&PID_0201
1/22/2021 1:37:16 PM(134): Checking for compatible module: VID_1A40&PID_0101
1/22/2021 1:37:16 PM(130): Checking for compatible module: VID_187C&PID_0550
1/22/2021 1:37:16 PM(126): Checking for compatible module: VID_154B&PID_00EE
1/22/2021 1:37:16 PM(122): Checking for compatible module: VID_06A3&PID_712C
1/22/2021 1:37:16 PM(118): Checking for compatible module: VID_06A3&PID_0C2D
1/22/2021 1:37:16 PM(112): Checking for compatible module: VID_06A3&PID_0BAC
1/22/2021 1:37:16 PM(108): Checking for compatible module: VID_06A3&PID_0763
1/22/2021 1:37:16 PM(105): Checking for compatible module: VID_05E3&PID_0743
1/22/2021 1:37:16 PM(101): Incompatible module skipped: Apple iPhone - VID/PID: VID_05AC&PID_12A8&MI_00
1/22/2021 1:37:16 PM(97): Checking for compatible module: VID_05AC&PID_12A8&MI_00
1/22/2021 1:37:16 PM(93): Incompatible module skipped: @oem4.inf,%iPhone.AppleUSB.DeviceDesc%;Apple Mobile Device USB Composite Device - VID/PID: VID_05AC&PID_12A8
1/22/2021 1:37:16 PM(90): Checking for compatible module: VID_05AC&PID_12A8
1/22/2021 1:37:16 PM(86): Checking for compatible module: VID_046D&PID_C52B&MI_02
1/22/2021 1:37:16 PM(83): Checking for compatible module: VID_046D&PID_C52B&MI_01
1/22/2021 1:37:16 PM(79): Checking for compatible module: VID_046D&PID_C52B&MI_00
1/22/2021 1:37:16 PM(76): Checking for compatible module: VID_046D&PID_C52B
1/22/2021 1:37:16 PM(72): Checking for compatible module: VID_045E&PID_0745&MI_02
1/22/2021 1:37:16 PM(69): Checking for compatible module: VID_045E&PID_0745&MI_01
1/22/2021 1:37:16 PM(65): Checking for compatible module: VID_045E&PID_0745&MI_00
1/22/2021 1:37:16 PM(62): Checking for compatible module: VID_045E&PID_0745
1/22/2021 1:37:16 PM(58): Checking for compatible module: VID_0000&PID_0006
1/22/2021 1:37:16 PM(55): Checking for compatible module: VID_0000&PID_0002
1/22/2021 1:37:16 PM(51): Checking for compatible module: ROOT_HUB30
1/22/2021 1:37:16 PM(48): ^(VID_1B4F&PID_9206|VID_2341&PID_8036|VID_2341&PID_0010|VID_2341&PID_0042|VID_2341&PID_0001|VID_8087&PID_0024|VID_1A86&PID_7523|VID_2A03&PID_0042|VID_0403&PID_6001|VID_0403\+PID_6001\+.+|VID_2A03&PID_0010|VID_2341&PID_0210|VID_2341&PID_0242|VID_10C4&PID_EA60|VID_2341&PID_0043|VID_2A03&PID_0043)
1/22/2021 1:37:16 PM(41): MobiFlightCache.LookupAllConnectedArduinoModulesAsync: Start
1/22/2021 1:37:16 PM(33): ExecutionManager.autoConnectTimer_Tick(): AutoConnect Modules
1/22/2021 1:37:12 PM(240): MainForm() : Logger initialized Debug



here is the crash log that pops up is you tell it to up load old config

See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.

************** Exception Text **************
System.NullReferenceException: Object reference not set to an instance of an object.
at MobiFlight.MobiFlightModule.LoadConfig()
at MobiFlight.UI.Panels.Settings.MobiFlightPanel.reloadConfigToolStripMenuItem_Click(Object sender, EventArgs e)
at System.Windows.Forms.ToolStripItem.RaiseEvent(Object key, EventArgs e)
at System.Windows.Forms.ToolStripMenuItem.OnClick(EventArgs e)
at System.Windows.Forms.ToolStripItem.HandleClick(EventArgs e)
at System.Windows.Forms.ToolStripItem.HandleMouseUp(MouseEventArgs e)
at System.Windows.Forms.ToolStrip.OnMouseUp(MouseEventArgs mea)
at System.Windows.Forms.ToolStripDropDown.OnMouseUp(MouseEventArgs mea)
at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ToolStrip.WndProc(Message& m)
at System.Windows.Forms.ToolStripDropDown.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)


************** Loaded Assemblies **************
mscorlib
Assembly Version: 4.0.0.0
Win32 Version: 4.8.4300.0 built by: NET48REL1LAST_C
CodeBase: file:///C:/Windows/Microsoft.NET/Framework64/v4.0.30319/mscorlib.dll
----------------------------------------
MFConnector
Assembly Version: 7.10.0.15
Win32 Version: 7.10.0.15
CodeBase: file:///C:/Users/myfyn/Downloads/MFConnector.exe
----------------------------------------
System.Windows.Forms
Assembly Version: 4.0.0.0
Win32 Version: 4.8.4270.0 built by: NET48REL1LAST_C
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System
Assembly Version: 4.0.0.0
Win32 Version: 4.8.4300.0 built by: NET48REL1LAST_C
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Drawing
Assembly Version: 4.0.0.0
Win32 Version: 4.8.3752.0 built by: NET48REL1
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
System.Configuration
Assembly Version: 4.0.0.0
Win32 Version: 4.8.4190.0 built by: NET48REL1LAST_B
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Configuration/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
----------------------------------------
System.Core
Assembly Version: 4.0.0.0
Win32 Version: 4.8.4300.0 built by: NET48REL1LAST_C
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Core/v4.0_4.0.0.0__b77a5c561934e089/System.Core.dll
----------------------------------------
System.Xml
Assembly Version: 4.0.0.0
Win32 Version: 4.8.3752.0 built by: NET48REL1
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
System.Data
Assembly Version: 4.0.0.0
Win32 Version: 4.8.4270.0 built by: NET48REL1LAST_C
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_64/System.Data/v4.0_4.0.0.0__b77a5c561934e089/System.Data.dll
----------------------------------------
System.Numerics
Assembly Version: 4.0.0.0
Win32 Version: 4.8.3752.0 built by: NET48REL1
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Numerics/v4.0_4.0.0.0__b77a5c561934e089/System.Numerics.dll
----------------------------------------
Microsoft.FlightSimulator.SimConnect
Assembly Version: 11.0.62651.3
Win32 Version:
CodeBase: file:///C:/Users/myfyn/Downloads/Microsoft.FlightSimulator.SimConnect.DLL
----------------------------------------
AutoUpdater.NET
Assembly Version: 1.6.0.0
Win32 Version: 1.6.0.0
CodeBase: file:///C:/Users/myfyn/Downloads/AutoUpdater.NET.DLL
----------------------------------------
FSUIPCClient
Assembly Version: 3.1.22.335
Win32 Version: 3.1.22.335
CodeBase: file:///C:/Users/myfyn/Downloads/FSUIPCClient.DLL
----------------------------------------
Microsoft.GeneratedCode
Assembly Version: 1.0.0.0
Win32 Version: 4.8.3752.0 built by: NET48REL1
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
CommandMessenger
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/Users/myfyn/Downloads/CommandMessenger.DLL
----------------------------------------

************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.

For example:

<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>

When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.

Hi

If your on Discord.... Please get in contact to Sebastian himself and also send him a link to this topic.... so he can see the Logging.

I not know that issue. But i also not tested the last Beta Release Badly i also not know if he change something in the Board detecting logics.
But a simple idea.... DOWNGRADE: If all work fine for you before, simply try if it work again after downgrade to last version !


About the other Mega.....
Here we can not "mark" a Arduino as "not for Mobiflight" ..... You only got "All or Nothing" as posible options.
Means you can Disable the "Auto Firmware Upload" .... Then Mobiflight not try or offer you to put firmware on that leonardo you use for other things...... BUT then it also not make Auto Uploads to your Mobiflight Boards if a new firmware comes.....
If you activate this feature then all Mobiboards get updated.... But sure it will on every systemstart see the other Arduino and will ask you over and over again !