MobiFlight Community Support

Welcome to the forum for MobiFlight! Feel free to reach out to the community in case you have questions, issues or just want to share great ideas or details about your latest home cockpit project.

You like MobiFlight? Donate via PayPal and support the MobiFlight development. Thanks! 

05/03/2024 - This forum is read-only

The community support for MobiFlight has moved exclusively over to our Discord server. Register for free and enjoy more interactive functions like image and video upload, voice chat. More than 7,000 registered users around the world make it a great experience!

See you on our MobiFlight Community Discord server.

A HUGE Thank You to everyone who participated in the forum, especially obviously to Pizman and Stephan who did an outstanding job over so many years providing an incredible service to the MobiFlight community.

The forum is still providing a lot of good content, hence we keep this information accessible.

Index > MobiFlight Software > Can not use barometric value....--> error
icon
Message #20809
Avatar
Joppnl
Posts: 30
Hello,


very strange:

If I enable the Baro mb / Altimeter setting (mb) and I try to run I get an error from MF :"....Error writing values to Display. Module...."



This is the (standard) definition I use in MF:


But....I do not use this value at all within the displays I assigned....



When I uncheck the box then all is ok and MF will start but I can not make it work...

What's wrong?

Thank you
2020-11-07 22:55
Message #20814
Avatar
pizman82
Moderator
From: ETSI, Germany
Posts: 6010
Supporter
Hi

The Error occure within the Config "Baro Mb"
You show us just the First FSUIPC Tab.... Pretty sure the issue is within the Compare, Display or Precondition Tab in that Config"

May your confusion is the word "Display Module"..... This not must be a LCD.... That can also means a 7Seg.
I can see that Cofig is set to a Output.... So i´m sure THERE is the issue und it not is effected to the LCD Config you additional show me in lower picture.
Good Luck !
2020-11-08 14:59
Message #20830
Avatar
Joppnl
Posts: 30
:thumbup: :thumbup:

I think I spent more then 3..4 hours trying to fix this error without succes and YES...what you mention, that was it!!

From a previous install the mb was on the 7-segment displays and when starting with a new install this setting was taken over from the old config.




Deactivated the 7-segment display and now it runs fine, THANKS pizman82~:thumbup:
2020-11-09 15:18
icon
Index > MobiFlight Software > Can not use barometric value....--> error