MobiFlight Community Support

Welcome to the forum for MobiFlight! Feel free to reach out to the community in case you have questions, issues or just want to share great ideas or details about your latest home cockpit project.

You like MobiFlight? Donate via PayPal and support the MobiFlight development. Thanks! 

icon
Avatar
sisoffi
Posts: 50
Hi, i have this problem with arduino card.
Im testing the fgcp for my madog and debug report me some problems. One of them taht delay the timing response
is the arduino card detect with more ports. Can help me?
thanks!

27/05/2020 00:40:30(520): Command: SetPin <2,2,255;>
27/05/2020 00:40:30(496): Command: SetPin <2,3,255;>
27/05/2020 00:40:30(467): Command: SetModule <1,0,0,135,224;>
27/05/2020 00:40:30(441): Command: SetModule <1,0,0,11795,31;>
27/05/2020 00:40:30(417): Command: SetModule <1,1,0,135,224;>
27/05/2020 00:40:30(397): Command: SetModule <1,1,0,11795,31;>
27/05/2020 00:40:30(331): Command: SetPin <2,53,0;>
27/05/2020 00:40:30(325): Command: SetPin <2,51,0;>
27/05/2020 00:40:30(320): Command: SetPin <2,49,0;>
27/05/2020 00:40:30(314): Command: SetPin <2,47,255;>
27/05/2020 00:40:30(299): Command: SetModule <1,3,0,000,7;>
27/05/2020 00:40:30(294): Command: SetModule <1,3,0,..000,248;>
27/05/2020 00:40:30(289): Command: SetModule <1,2,0, 0000,31;>
27/05/2020 00:40:30(284): Command: SetModule <1,2,0,100,224;>
27/05/2020 00:39:17(308): ExecutionManager.AutoConnectStart:Started auto connect timer
27/05/2020 00:39:17(296): ExecutionManager.AutoConnectStart:Started auto connect timer
27/05/2020 00:39:17(93): ExecutionManager.autoConnectTimer_Tick(): AutoConnect Sim
27/05/2020 00:39:17(62): Command: SetModule <1,3,0, ,255;>
27/05/2020 00:39:17(58): Command: SetModule <1,2,0, ,255;>
27/05/2020 00:39:17(52): Command: SetModule <1,1,0, ,255;>
27/05/2020 00:39:17(46): Command: SetModule <1,0,0, ,255;>
27/05/2020 00:39:17(40): Command: SetPin <2,53,0;>
27/05/2020 00:39:17(32): Command: SetPin <2,51,0;>
27/05/2020 00:39:17(27): Command: SetPin <2,49,0;>
27/05/2020 00:39:17(23): Command: SetPin <2,47,0;>
27/05/2020 00:39:17(17): Command: SetPin <2,2,0;>
27/05/2020 00:39:17(12): Command: SetPin <2,3,0;>
27/05/2020 00:39:17(6): Preventing entering EnergySaving Mode: KeepAlive!
27/05/2020 00:39:16(999): ExecutionManager.TestModeStop:Stopped test timer
27/05/2020 00:39:16(989): MobiFlightModule.GetInfo: MobiFlight Mega, MADDOG_FGCP,1.9.2, SN-8ea-966
27/05/2020 00:39:14(918): MobiflightModule.connect: Connected to Default at COM15 of Type MobiFlight Mega (DTR=>True)
27/05/2020 00:39:14(908): MobiFlightModule.GetInfo: MobiFlight Mega, MADDOG_FGCP2,1.9.2, SN-12d-2d4
27/05/2020 00:39:12(851): MobiflightModule.connect: Connected to Default at COM16 of Type MobiFlight Mega (DTR=>True)
27/05/2020 00:39:12(842): MobiFlightCache.RegisterModule(Default:COM15)
27/05/2020 00:39:12(838): MobiFlightCache.RegisterModule(Default:COM16)
27/05/2020 00:39:12(833): MobiFlightCache.connect: Clearing modules
27/05/2020 00:39:12(818): ExecutionManager.autoConnectTimer_Tick(): AutoConnect Modules
27/05/2020 00:39:12(812): No updates necessary. Your version: 7.8.2.0, Latest version: 7.8.2
27/05/2020 00:39:12(53): Checking for updates
27/05/2020 00:39:11(906): MobiflightModule.disconnect: Disconnected MADDOG_FGCP at COM15
27/05/2020 00:39:11(846): MobiFlightModule.GetInfo: MobiFlight Mega, MADDOG_FGCP,1.9.2, SN-8ea-966
27/05/2020 00:39:09(779): MobiflightModule.connect: Connected to Default at COM15 of Type Arduino Mega 2560 (DTR=>True)
27/05/2020 00:39:09(774): MobiflightModule.disconnect: Disconnected MADDOG_FGCP2 at COM16
27/05/2020 00:39:09(715): MobiFlightModule.GetInfo: MobiFlight Mega, MADDOG_FGCP2,1.9.2, SN-12d-2d4
27/05/2020 00:39:07(650): MobiflightModule.connect: Connected to Default at COM16 of Type Arduino Mega 2560 (DTR=>True)
27/05/2020 00:39:07(634): Checking for compatible module: VID_8087&PID_0024
27/05/2020 00:39:07(634): Found potentially compatible module: VID_2341&PID_0042@COM12
27/05/2020 00:39:07(634): Found potentially compatible module: VID_2341&PID_0042@COM3
27/05/2020 00:39:07(633): Checking for compatible module: VID_2341&PID_0042
27/05/2020 00:39:07(633): Checking for compatible module: VID_1DD2&PID_22A0
27/05/2020 00:39:07(633): Checking for compatible module: VID_1D5C&PID_2000
27/05/2020 00:39:07(633): Found potentially compatible module Arduino Mega 2560 by VID/PID: VID_1A86&PID_7523@COM15
27/05/2020 00:39:07(632): Found potentially compatible module Arduino Mega 2560 by VID/PID: VID_1A86&PID_7523@COM14
27/05/2020 00:39:07(632): Found potentially compatible module Arduino Mega 2560 by VID/PID: VID_1A86&PID_7523@COM11
27/05/2020 00:39:07(632): Found potentially compatible module Arduino Mega 2560 by VID/PID: VID_1A86&PID_7523@COM10
27/05/2020 00:39:07(632): Found potentially compatible module Arduino Mega 2560 by VID/PID: VID_1A86&PID_7523@COM9
27/05/2020 00:39:07(632): Found potentially compatible module Arduino Mega 2560 by VID/PID: VID_1A86&PID_7523@COM38
27/05/2020 00:39:07(632): Found potentially compatible module Arduino Mega 2560 by VID/PID: VID_1A86&PID_7523@COM36
27/05/2020 00:39:07(632): Found potentially compatible module Arduino Mega 2560 by VID/PID: VID_1A86&PID_7523@COM37
27/05/2020 00:39:07(632): Found potentially compatible module Arduino Mega 2560 by VID/PID: VID_1A86&PID_7523@COM8
27/05/2020 00:39:07(631): Found potentially compatible module Arduino Mega 2560 by VID/PID: VID_1A86&PID_7523@COM7
27/05/2020 00:39:07(631): Found potentially compatible module Arduino Mega 2560 by VID/PID: VID_1A86&PID_7523@COM6
27/05/2020 00:39:07(631): Found potentially compatible module Arduino Mega 2560 by VID/PID: VID_1A86&PID_7523@COM5
27/05/2020 00:39:07(631): Found potentially compatible module Arduino Mega 2560 by VID/PID: VID_1A86&PID_7523@COM4
27/05/2020 00:39:07(631): Found potentially compatible module Arduino Mega 2560 by VID/PID: VID_1A86&PID_7523@COM16
27/05/2020 00:39:07(631): Found potentially compatible module Arduino Mega 2560 by VID/PID: VID_1A86&PID_7523@COM34
27/05/2020 00:39:07(630): Found potentially compatible module Arduino Mega 2560 by VID/PID: VID_1A86&PID_7523@COM33
27/05/2020 00:39:07(630): Found potentially compatible module Arduino Mega 2560 by VID/PID: VID_1A86&PID_7523@COM35
27/05/2020 00:39:07(630): Found potentially compatible module Arduino Mega 2560 by VID/PID: VID_1A86&PID_7523@COM32
27/05/2020 00:39:07(630): Found potentially compatible module Arduino Mega 2560 by VID/PID: VID_1A86&PID_7523@COM31
27/05/2020 00:39:07(630): Found potentially compatible module Arduino Mega 2560 by VID/PID: VID_1A86&PID_7523@COM13
27/05/2020 00:39:07(630): Checking for compatible module: VID_1A86&PID_7523
27/05/2020 00:39:07(629): Checking for compatible module: VID_1A40&PID_0201
27/05/2020 00:39:07(629): Checking for compatible module: VID_1A40&PID_0101
27/05/2020 00:39:07(629): Checking for compatible module: VID_18A5&PID_0237
27/05/2020 00:39:07(629): Checking for compatible module: VID_152D&PID_1561
27/05/2020 00:39:07(628): Checking for compatible module: VID_145F&PID_01E7&MI_01
27/05/2020 00:39:07(628): Checking for compatible module: VID_145F&PID_01E7&MI_00
27/05/2020 00:39:07(628): Checking for compatible module: VID_145F&PID_01E7
27/05/2020 00:39:07(626): Checking for compatible module: VID_0D8C&PID_000C&MI_03
27/05/2020 00:39:07(626): Incompatible module skipped: C-Media USB Headphone Set - VID/PID: VID_0D8C&PID_000C&MI_00
27/05/2020 00:39:07(626): Checking for compatible module: VID_0D8C&PID_000C&MI_00
27/05/2020 00:39:07(625): Checking for compatible module: VID_0D8C&PID_000C
27/05/2020 00:39:07(625): Incompatible module skipped: TP-LINK Wireless USB Adapter - VID/PID: VID_0CF3&PID_9271
27/05/2020 00:39:07(625): Checking for compatible module: VID_0CF3&PID_9271
27/05/2020 00:39:07(625): Incompatible module skipped: Realtek USB2.0 MIC - VID/PID: VID_0BDA&PID_58B0&MI_02
27/05/2020 00:39:07(625): Checking for compatible module: VID_0BDA&PID_58B0&MI_02
27/05/2020 00:39:07(625): Incompatible module skipped: FULL HD 1080P Webcam - VID/PID: VID_0BDA&PID_58B0&MI_00
27/05/2020 00:39:07(625): Checking for compatible module: VID_0BDA&PID_58B0&MI_00
27/05/2020 00:39:07(625): Checking for compatible module: VID_0BDA&PID_58B0
27/05/2020 00:39:07(625): Checking for compatible module: VID_0BC2&PID_61B7
27/05/2020 00:39:07(625): Checking for compatible module: VID_0BC2&PID_61B5
27/05/2020 00:39:07(624): Checking for compatible module: VID_05E3&PID_0608
27/05/2020 00:39:07(624): Checking for compatible module: VID_04F9&PID_0054
27/05/2020 00:39:07(624): Checking for compatible module: VID_04D8&PID_F787
27/05/2020 00:39:07(623): Checking for compatible module: VID_04D8&PID_0150
27/05/2020 00:39:07(623): Checking for compatible module: VID_04D8&PID_0072
27/05/2020 00:39:07(622): Checking for compatible module: VID_04D8&PID_0071
27/05/2020 00:39:07(622): Checking for compatible module: VID_046D&PID_C534&MI_01
27/05/2020 00:39:07(622): Checking for compatible module: VID_046D&PID_C534&MI_00
27/05/2020 00:39:07(621): Checking for compatible module: VID_046D&PID_C534
27/05/2020 00:39:07(621): Checking for compatible module: VID_046D&PID_C52E&MI_01
27/05/2020 00:39:07(621): Checking for compatible module: VID_046D&PID_C52E&MI_00
27/05/2020 00:39:07(620): Checking for compatible module: VID_046D&PID_C52E
27/05/2020 00:39:07(620): Checking for compatible module: VID_045E&PID_0038
27/05/2020 00:39:07(620): Checking for compatible module: VID_045E&PID_001B
27/05/2020 00:39:07(620): Checking for compatible module: VID_0000&PID_0004
27/05/2020 00:39:07(619): Checking for compatible module: VID_0000&PID_0002
27/05/2020 00:39:07(619): Checking for compatible module: ROOT_HUB30
27/05/2020 00:39:07(619): Checking for compatible module: ROOT_HUB20
27/05/2020 00:39:07(619): Checking for compatible module: ASMEDIAROOT_Hub
27/05/2020 00:39:07(619): ^(VID_1B4F&PID_9206|VID_2341&PID_8036|VID_2341&PID_0010|VID_2341&PID_0042|VID_2341&PID_0001|VID_8087&PID_0024|VID_1A86&PID_7523|VID_2A03&PID_0042|VID_0403&PID_6001|VID_2A03&PID_0010|VID_2341&PID_0210|VID_2341&PID_0242|VID_2341&PID_0043|VID_2A03&PID_0043)
27/05/2020 00:39:07(469): MainForm() : Logger initialized Debug
2020-05-27 00:56
Avatar
pizman82
Moderator
From: ETSI, Germany
Posts: 3521
Supporter
Hi

I don´t understand.... Have no big knowledge about this debug reports....

In easy words.... Whats your exact problem ?
Good Luck !
2020-05-27 13:40
Avatar
spokes2112
Posts: 6
disregard,
went though it.. :thumbup:
MF is just checking everything connected to PC, a lot of USB hubs!
2020-05-27 16:00
Avatar
sisoffi
Posts: 50
Analyzing with our technicians, it seems that mobiflight is having difficulty managing the data flow with prepar v4.

And in fact the encoders for example work in sometimes in delay, turn the knobs the releases and the numbers on the digits for example you see them scroll.
Sometimes Run stop to work need to Re-RUN again MF.

When my home cockpit is up and running there will be 15 arduino boards (I hope to be back in 12) and I can't do otherwise even with other programs like opus which governs me the synchronization between multiple PCs, widetraffic for AI traffic in the various PCs, IVAO etc.

Is there any way to give it top management priority? for mobiflight to have top priority over fsuipc simconnect?

Thanks
Simone
2020-05-28 08:17
Avatar
sisoffi
Posts: 50
This is my last flight if can help:

27/05/2020 18:45:40(553): Command: SetModule <1,0,0,11510,31;>
27/05/2020 18:45:40(374): Command: SetModule <1,1,0,10970,31;>
27/05/2020 18:45:36(39): Command: SetModule <1,1,0,10800,31;>
27/05/2020 18:45:35(590): Command: SetPin <2,47,255;>
27/05/2020 18:45:35(439): Command: SetModule <1,3,0,000,7;>
27/05/2020 18:45:35(289): Command: SetModule <1,3,0,..000,248;>
27/05/2020 18:45:35(130): Command: SetModule <1,2,0, 0000,31;>
27/05/2020 18:45:34(993): Command: SetModule <1,2,0,100,224;>
27/05/2020 18:45:30(879): _syncConfigToForm : Exception on selecting item in Stepper Address ComboBox
27/05/2020 18:45:30(731): Set in ComboBox: stepperAddressesComboBox
27/05/2020 18:45:30(579): _syncConfigToForm : Exception on selecting item in Servo Address ComboBox
27/05/2020 18:45:30(429): Set in ComboBox: servoAddressesComboBox
27/05/2020 18:45:30(251): Set 8 in ComboBox: displayLedModuleSizeComboBox
27/05/2020 18:45:30(95): Set 1 in ComboBox: displayLedConnectorComboBox
27/05/2020 18:45:29(955): _syncConfigToForm : Exception on selecting item in Led Address ComboBox
27/05/2020 18:45:29(800): Set NAV2 in ComboBox: displayLedAddressComboBox
27/05/2020 18:45:29(653): Set 05 in ComboBox: displayBcdPin4ComboBox
27/05/2020 18:45:29(503): Set A in ComboBox: displayBcdPortComboBox
27/05/2020 18:45:29(348): Set 04 in ComboBox: displayBcdPin3ComboBox
27/05/2020 18:45:29(198): Set A in ComboBox: displayBcdPortComboBox
27/05/2020 18:45:29(46): Set 03 in ComboBox: displayBcdPin2ComboBox
27/05/2020 18:45:28(905): Set A in ComboBox: displayBcdPortComboBox
27/05/2020 18:45:28(753): Set 02 in ComboBox: displayBcdPin1ComboBox
27/05/2020 18:45:28(598): Set A in ComboBox: displayBcdPortComboBox
27/05/2020 18:45:28(461): Set 01 in ComboBox: displayBcdStrobePinComboBox
27/05/2020 18:45:28(309): Set A in ComboBox: displayBcdStrobePortComboBox
27/05/2020 18:45:28(157): displayArcazeSerialComboBox_SelectedIndexChanged : Problem setting Display Type ComboBox
27/05/2020 18:45:27(994): Set Display Module in ComboBox: displayTypeComboBox
27/05/2020 18:45:27(843): Set Display Module in ComboBox: displayTypeComboBox
27/05/2020 18:45:27(690): Set in ComboBox: comparisonOperandComboBox
27/05/2020 18:45:27(539): FsuipcConfigPanel::syncFromConfig : Exception on selecting item in ComboBox
27/05/2020 18:45:27(385): Set 255 in ComboBox: fsuipcSizeComboBox
27/05/2020 18:45:27(206): displayTypeComboBox_SelectedIndexChanged: called.
27/05/2020 18:45:27(47): Set Display Module in ComboBox: displayTypeComboBox
27/05/2020 18:45:26(882): FsuipcConfigPanel::syncFromConfig : Exception on selecting item in ComboBox
27/05/2020 18:45:26(747): Set 255 in ComboBox: fsuipcSizeComboBox
27/05/2020 18:45:26(552): Set 1 in ComboBox: fsuipcSizeComboBox
27/05/2020 18:45:26(400): Set in ComboBox: fsuipcSizeComboBox
27/05/2020 18:45:22(540): _syncConfigToForm : Exception on selecting item in Stepper Address ComboBox
27/05/2020 18:45:22(396): Set in ComboBox: stepperAddressesComboBox
27/05/2020 18:45:22(244): _syncConfigToForm : Exception on selecting item in Servo Address ComboBox
27/05/2020 18:45:22(97): Set in ComboBox: servoAddressesComboBox
27/05/2020 18:45:21(920): Set 8 in ComboBox: displayLedModuleSizeComboBox
27/05/2020 18:45:21(780): Set 1 in ComboBox: displayLedConnectorComboBox
27/05/2020 18:45:21(643): Set NAV2 in ComboBox: displayLedAddressComboBox
27/05/2020 18:45:21(509): Set 05 in ComboBox: displayBcdPin4ComboBox
27/05/2020 18:45:21(369): Set A in ComboBox: displayBcdPortComboBox
27/05/2020 18:45:21(216): Set 04 in ComboBox: displayBcdPin3ComboBox
27/05/2020 18:45:21(68): Set A in ComboBox: displayBcdPortComboBox
27/05/2020 18:45:20(921): Set 03 in ComboBox: displayBcdPin2ComboBox
27/05/2020 18:45:20(759): Set A in ComboBox: displayBcdPortComboBox
27/05/2020 18:45:20(625): Set 02 in ComboBox: displayBcdPin1ComboBox
27/05/2020 18:45:20(470): Set A in ComboBox: displayBcdPortComboBox
27/05/2020 18:45:20(321): Set 01 in ComboBox: displayBcdStrobePinComboBox
27/05/2020 18:45:20(171): Set A in ComboBox: displayBcdStrobePortComboBox
27/05/2020 18:45:20(14): displayTypeComboBox_SelectedIndexChanged: Adding connected device: LedModule, HDG+ALT
27/05/2020 18:45:19(859): displayTypeComboBox_SelectedIndexChanged: Adding connected device: LedModule, SPD+VSPEED
27/05/2020 18:45:19(710): displayTypeComboBox_SelectedIndexChanged: Adding connected device: LedModule, NAV1
27/05/2020 18:45:19(558): displayTypeComboBox_SelectedIndexChanged: Adding connected device: LedModule, NAV2
27/05/2020 18:45:19(417): displayTypeComboBox_SelectedIndexChanged: Adding connected device: Output, Alpha P
27/05/2020 18:45:19(258): displayTypeComboBox_SelectedIndexChanged: Adding connected device: Output, Alpha M
27/05/2020 18:45:19(96): displayTypeComboBox_SelectedIndexChanged: Adding connected device: Output, Alpha S
27/05/2020 18:45:18(957): displayTypeComboBox_SelectedIndexChanged: Adding connected device: Output, Alpha V
27/05/2020 18:45:18(818): displayTypeComboBox_SelectedIndexChanged: Adding connected device: Output, AP Relay
27/05/2020 18:45:18(670): displayTypeComboBox_SelectedIndexChanged: Adding connected device: Output, ATH Relay
27/05/2020 18:45:18(526): displayTypeComboBox_SelectedIndexChanged: called.
27/05/2020 18:45:18(363): Set Display Module in ComboBox: displayTypeComboBox
27/05/2020 18:45:18(196): Set Display Module in ComboBox: displayTypeComboBox
27/05/2020 18:45:18(54): Set in ComboBox: comparisonOperandComboBox
27/05/2020 18:45:17(899): Set 2 in ComboBox: fsuipcSizeComboBox
27/05/2020 18:45:17(745): displayTypeComboBox_SelectedIndexChanged: called.
27/05/2020 18:45:17(608): Set Display Module in ComboBox: displayTypeComboBox
27/05/2020 18:45:17(444): Set 2 in ComboBox: fsuipcSizeComboBox
27/05/2020 18:45:17(244): Set 1 in ComboBox: fsuipcSizeComboBox
27/05/2020 18:45:17(93): Set in ComboBox: fsuipcSizeComboBox
27/05/2020 18:45:13(369): _syncConfigToForm : Exception on selecting item in Stepper Address ComboBox
27/05/2020 18:45:13(211): Set in ComboBox: stepperAddressesComboBox
27/05/2020 18:45:13(62): _syncConfigToForm : Exception on selecting item in Servo Address ComboBox
27/05/2020 18:45:12(912): Set in ComboBox: servoAddressesComboBox
27/05/2020 18:45:12(730): Set 8 in ComboBox: displayLedModuleSizeComboBox
27/05/2020 18:45:12(595): Set 1 in ComboBox: displayLedConnectorComboBox
27/05/2020 18:45:12(444): Set NAV1 in ComboBox: displayLedAddressComboBox
27/05/2020 18:45:12(294): Set 05 in ComboBox: displayBcdPin4ComboBox
27/05/2020 18:45:12(154): Set A in ComboBox: displayBcdPortComboBox
27/05/2020 18:45:12(1): Set 04 in ComboBox: displayBcdPin3ComboBox
27/05/2020 18:45:11(857): Set A in ComboBox: displayBcdPortComboBox
27/05/2020 18:45:11(706): Set 03 in ComboBox: displayBcdPin2ComboBox
27/05/2020 18:45:11(555): Set A in ComboBox: displayBcdPortComboBox
27/05/2020 18:45:11(407): Set 02 in ComboBox: displayBcdPin1ComboBox
27/05/2020 18:45:11(256): Set A in ComboBox: displayBcdPortComboBox
27/05/2020 18:45:11(106): Set 01 in ComboBox: displayBcdStrobePinComboBox
27/05/2020 18:45:10(956): Set A in ComboBox: displayBcdStrobePortComboBox
27/05/2020 18:45:10(807): displayTypeComboBox_SelectedIndexChanged: Adding connected device: LedModule, HDG+ALT
27/05/2020 18:45:10(669): displayTypeComboBox_SelectedIndexChanged: Adding connected device: LedModule, SPD+VSPEED
27/05/2020 18:45:10(522): displayTypeComboBox_SelectedIndexChanged: Adding connected device: LedModule, NAV1
27/05/2020 18:45:10(365): displayTypeComboBox_SelectedIndexChanged: Adding connected device: LedModule, NAV2
27/05/2020 18:45:10(215): displayTypeComboBox_SelectedIndexChanged: Adding connected device: Output, Alpha P
27/05/2020 18:45:10(77): displayTypeComboBox_SelectedIndexChanged: Adding connected device: Output, Alpha M
27/05/2020 18:45:09(938): displayTypeComboBox_SelectedIndexChanged: Adding connected device: Output, Alpha S
27/05/2020 18:45:09(803): displayTypeComboBox_SelectedIndexChanged: Adding connected device: Output, Alpha V
27/05/2020 18:45:09(652): displayTypeComboBox_SelectedIndexChanged: Adding connected device: Output, AP Relay
27/05/2020 18:45:09(494): displayTypeComboBox_SelectedIndexChanged: Adding connected device: Output, ATH Relay
27/05/2020 18:45:09(335): displayTypeComboBox_SelectedIndexChanged: called.
27/05/2020 18:45:09(184): Set Display Module in ComboBox: displayTypeComboBox
27/05/2020 18:45:09(35): Set Display Module in ComboBox: displayTypeComboBox
27/05/2020 18:45:08(898): Set in ComboBox: comparisonOperandComboBox
27/05/2020 18:45:08(733): Set 2 in ComboBox: fsuipcSizeComboBox
27/05/2020 18:45:08(560): displayTypeComboBox_SelectedIndexChanged: called.
27/05/2020 18:45:08(414): Set Display Module in ComboBox: displayTypeComboBox
27/05/2020 18:45:08(263): Set 2 in ComboBox: fsuipcSizeComboBox
27/05/2020 18:45:08(66): Set 1 in ComboBox: fsuipcSizeComboBox
27/05/2020 18:45:07(921): Set in ComboBox: fsuipcSizeComboBox
27/05/2020 18:45:03(528): _syncConfigToForm : Exception on selecting item in Stepper Address ComboBox
27/05/2020 18:45:03(367): Set in ComboBox: stepperAddressesComboBox
27/05/2020 18:45:03(215): _syncConfigToForm : Exception on selecting item in Servo Address ComboBox
27/05/2020 18:45:03(57): Set in ComboBox: servoAddressesComboBox
27/05/2020 18:45:02(910): Set 8 in ComboBox: displayLedModuleSizeComboBox
27/05/2020 18:45:02(765): Set 1 in ComboBox: displayLedConnectorComboBox
27/05/2020 18:45:02(610): Set SPD+VSPEED in ComboBox: displayLedAddressComboBox
27/05/2020 18:45:02(449): Set 05 in ComboBox: displayBcdPin4ComboBox
27/05/2020 18:45:02(301): Set A in ComboBox: displayBcdPortComboBox
27/05/2020 18:45:02(146): Set 04 in ComboBox: displayBcdPin3ComboBox
27/05/2020 18:45:01(999): Set A in ComboBox: displayBcdPortComboBox
27/05/2020 18:45:01(841): Set 03 in ComboBox: displayBcdPin2ComboBox
27/05/2020 18:45:01(693): Set A in ComboBox: displayBcdPortComboBox
27/05/2020 18:45:01(541): Set 02 in ComboBox: displayBcdPin1ComboBox
27/05/2020 18:45:01(395): Set A in ComboBox: displayBcdPortComboBox
27/05/2020 18:45:01(239): Set 01 in ComboBox: displayBcdStrobePinComboBox
27/05/2020 18:45:01(79): Set A in ComboBox: displayBcdStrobePortComboBox
27/05/2020 18:45:00(911): displayTypeComboBox_SelectedIndexChanged: Adding connected device: LedModule, HDG+ALT
27/05/2020 18:45:00(754): displayTypeComboBox_SelectedIndexChanged: Adding connected device: LedModule, SPD+VSPEED
27/05/2020 18:45:00(597): displayTypeComboBox_SelectedIndexChanged: Adding connected device: LedModule, NAV1
27/05/2020 18:45:00(447): displayTypeComboBox_SelectedIndexChanged: Adding connected device: LedModule, NAV2
27/05/2020 18:45:00(300): displayTypeComboBox_SelectedIndexChanged: Adding connected device: Output, Alpha P
27/05/2020 18:45:00(153): displayTypeComboBox_SelectedIndexChanged: Adding connected device: Output, Alpha M
27/05/2020 18:45:00(6): displayTypeComboBox_SelectedIndexChanged: Adding connected device: Output, Alpha S
27/05/2020 18:44:59(855): displayTypeComboBox_SelectedIndexChanged: Adding connected device: Output, Alpha V
27/05/2020 18:44:59(706): displayTypeComboBox_SelectedIndexChanged: Adding connected device: Output, AP Relay
27/05/2020 18:44:59(566): displayTypeComboBox_SelectedIndexChanged: Adding connected device: Output, ATH Relay
27/05/2020 18:44:59(431): displayTypeComboBox_SelectedIndexChanged: called.
27/05/2020 18:44:59(278): Set Display Module in ComboBox: displayTypeComboBox
27/05/2020 18:44:59(135): Set Display Module in ComboBox: displayTypeComboBox
27/05/2020 18:44:58(986): Set in ComboBox: comparisonOperandComboBox
27/05/2020 18:44:58(822): FsuipcConfigPanel::syncFromConfig : Exception on selecting item in ComboBox
27/05/2020 18:44:58(686): Set 255 in ComboBox: fsuipcSizeComboBox
27/05/2020 18:44:58(358): displayTypeComboBox_SelectedIndexChanged: called.
27/05/2020 18:44:58(201): Set Display Module in ComboBox: displayTypeComboBox
27/05/2020 18:44:58(59): FsuipcConfigPanel::syncFromConfig : Exception on selecting item in ComboBox
27/05/2020 18:44:57(905): Set 255 in ComboBox: fsuipcSizeComboBox
27/05/2020 18:44:57(697): Set 1 in ComboBox: fsuipcSizeComboBox
27/05/2020 18:44:57(548): Set in ComboBox: fsuipcSizeComboBox
27/05/2020 18:44:53(921): Error on config execution. NAV1_CRS (OFF). Error on writing values to Display Module. Please review your config.
27/05/2020 18:44:53(770): Command: SetModule <1,0,0,11795,31;>
27/05/2020 18:44:53(617): Command: SetPin <2,47,0;>
27/05/2020 18:44:53(464): Command: SetModule <1,3,0, ,7;>
27/05/2020 18:44:53(309): Command: SetModule <1,3,0, ,248;>
27/05/2020 18:44:53(159): Command: SetModule <1,2,0, ,31;>
27/05/2020 18:44:53(11): Command: SetModule <1,2,0, ,224;>
27/05/2020 18:44:50(143): Error on config execution. NAV1_CRS (OFF). Error on writing values to Display Module. Please review your config.
27/05/2020 18:44:48(277): Command: SetModule <1,0,0,317,224;>
27/05/2020 18:44:48(127): Command: SetModule <1,0,0,11510,31;>
27/05/2020 18:44:47(972): Command: SetModule <1,1,0,038,224;>
27/05/2020 18:44:47(828): Command: SetModule <1,1,0,10970,31;>
27/05/2020 18:44:47(683): Command: SetPin <2,53,0;>
27/05/2020 18:44:47(538): Command: SetPin <2,51,0;>
27/05/2020 18:44:47(394): Command: SetPin <2,49,0;>
27/05/2020 18:44:47(244): Command: SetPin <2,47,255;>
27/05/2020 18:44:47(86): Command: SetModule <1,3,0,000,7;>
27/05/2020 18:44:46(926): Command: SetModule <1,3,0,..000,248;>
27/05/2020 18:44:46(773): Command: SetModule <1,2,0, 0000,31;>
27/05/2020 18:44:46(638): Command: SetModule <1,2,0,100,224;>
27/05/2020 18:44:42(121): Command: SetModule <1,3,0, ,255;>
27/05/2020 18:44:41(959): Command: SetModule <1,2,0, ,255;>
27/05/2020 18:44:41(800): Command: SetModule <1,1,0, ,255;>
27/05/2020 18:44:41(628): Command: SetModule <1,0,0, ,255;>
27/05/2020 18:44:41(476): Command: SetPin <2,47,0;>
27/05/2020 18:44:41(326): Command: SetPin <2,2,0;>
27/05/2020 18:44:41(176): Command: SetPin <2,3,0;>
27/05/2020 18:44:41(35): Command: SetPin <2,52,0;>
27/05/2020 18:44:40(882): Command: SetPin <2,50,0;>
27/05/2020 18:44:38(891): Command: SetModule <1,0,0,317,224;>
27/05/2020 18:44:38(744): Command: SetModule <1,0,0,11795,31;>
27/05/2020 18:44:38(590): Command: SetModule <1,1,0,038,224;>
27/05/2020 18:44:38(438): Command: SetModule <1,1,0,10800,31;>
27/05/2020 18:44:38(294): Command: SetPin <2,53,0;>
27/05/2020 18:44:38(145): Command: SetPin <2,51,0;>
27/05/2020 18:44:37(996): Command: SetPin <2,49,0;>
27/05/2020 18:44:37(843): Command: SetPin <2,47,255;>
27/05/2020 18:44:37(694): Command: SetModule <1,3,0,000,7;>
27/05/2020 18:44:37(550): Command: SetModule <1,3,0,..000,248;>
27/05/2020 18:44:37(405): Command: SetModule <1,2,0, 0000,31;>
27/05/2020 18:44:37(260): Command: SetModule <1,2,0,100,224;>
27/05/2020 18:44:33(390): Command: SetModule <1,3,0, ,255;>
27/05/2020 18:44:33(238): Command: SetModule <1,2,0, ,255;>
27/05/2020 18:44:33(93): Command: SetModule <1,1,0, ,255;>
27/05/2020 18:44:32(949): Command: SetModule <1,0,0, ,255;>
27/05/2020 18:44:32(808): Command: SetPin <2,47,0;>
27/05/2020 18:44:32(676): Command: SetPin <2,2,0;>
27/05/2020 18:44:32(532): Command: SetPin <2,3,0;>
27/05/2020 18:44:32(384): Command: SetPin <2,52,0;>
27/05/2020 18:44:32(236): Command: SetPin <2,50,0;>
27/05/2020 18:44:08(425): Executing OnPress: Button31@SN-8ea-966
27/05/2020 18:44:08(281): Config found for Button: Button31@SN-8ea-966
27/05/2020 18:44:08(141): Executing OnRelease: Button30@SN-8ea-966
27/05/2020 18:44:08(6): Config found for Button: Button30@SN-8ea-966
27/05/2020 18:44:07(103): Executing OnPress: Button30@SN-8ea-966
27/05/2020 18:44:06(953): Config found for Button: Button30@SN-8ea-966
27/05/2020 18:44:06(810): Executing OnRelease: Button31@SN-8ea-966
27/05/2020 18:44:06(667): Config found for Button: Button31@SN-8ea-966
27/05/2020 18:44:04(608): Executing OnRelease: Button6@SN-8ea-966
27/05/2020 18:44:04(472): Config found for Button: Button6@SN-8ea-966
27/05/2020 18:44:04(304): Executing OnPress: Button5@SN-8ea-966
27/05/2020 18:44:04(151): Config found for Button: Button5@SN-8ea-966
27/05/2020 18:44:03(295): Executing OnPress: Button31@SN-8ea-966
27/05/2020 18:44:03(164): Config found for Button: Button31@SN-8ea-966
27/05/2020 18:44:02(992): Executing OnRelease: Button30@SN-8ea-966
27/05/2020 18:44:02(859): Config found for Button: Button30@SN-8ea-966
27/05/2020 18:44:02(673): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:44:02(529): Executing OnRight: Encoder SPD@SN-8ea-966
27/05/2020 18:44:02(384): Config found for Encoder: Encoder SPD@SN-8ea-966
27/05/2020 18:43:52(477): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:43:52(329): Executing OnLeft: Encoder SPD@SN-8ea-966
27/05/2020 18:43:52(185): Config found for Encoder: Encoder SPD@SN-8ea-966
27/05/2020 18:43:29(267): Command: SetModule <1,2,0,100,224;>
27/05/2020 18:43:29(124): Preventing entering EnergySaving Mode: KeepAlive!
27/05/2020 18:43:28(952): Preventing entering EnergySaving Mode: KeepAlive!
27/05/2020 18:43:12(871): Command: SetModule <1,1,0,10800,31;>
27/05/2020 18:43:12(730): Command: SetModule <1,3,0,000,7;>
27/05/2020 18:43:12(585): Command: SetModule <1,3,0,..000,248;>
27/05/2020 18:43:12(149): Command: SetPin <2,47,255;>
27/05/2020 18:43:12(2): Command: SetModule <1,2,0, 0000,31;>
27/05/2020 18:43:11(854): Command: SetModule <1,2,0,100,224;>
27/05/2020 18:43:07(359): Serialized Arcaze Extension Module Settings: <?xml version="1.0" encoding="utf-16"?>
<ArrayOfArcazeModuleSettings xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
27/05/2020 18:31:44(25): Set Debug in ComboBox: logLevelComboBox
27/05/2020 18:31:42(645): Command: SetModule <1,3,0, ,255;>
27/05/2020 18:31:42(466): Command: SetModule <1,2,0, ,255;>
27/05/2020 18:31:42(285): Command: SetModule <1,1,0, ,255;>
27/05/2020 18:31:42(89): Command: SetModule <1,0,0, ,255;>
27/05/2020 18:31:41(945): Command: SetPin <2,47,0;>
27/05/2020 18:31:41(801): Command: SetPin <2,2,0;>
27/05/2020 18:31:41(613): Command: SetPin <2,3,0;>
27/05/2020 18:31:41(479): Command: SetPin <2,52,0;>
27/05/2020 18:31:41(333): Command: SetPin <2,50,0;>
27/05/2020 18:31:41(153): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:31:40(967): Executing OnLeft: Encoder HDG@SN-8ea-966
27/05/2020 18:31:40(793): Config found for Encoder: Encoder HDG@SN-8ea-966
27/05/2020 18:31:40(615): Command: SetModule <1,3,0,286,7;>
27/05/2020 18:31:40(456): Command: SetModule <1,2,0,-1200,31;>
27/05/2020 18:31:40(322): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:31:40(152): Executing OnLeft: Encoder HDG@SN-8ea-966
27/05/2020 18:31:39(956): Config found for Encoder: Encoder HDG@SN-8ea-966
27/05/2020 18:31:39(805): Command: SetModule <1,3,0,285,7;>
27/05/2020 18:31:39(621): Command: SetModule <1,2,0,-1300,31;>
27/05/2020 18:31:39(451): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:31:39(308): Executing OnLeft: Encoder HDG@SN-8ea-966
27/05/2020 18:31:39(128): Config found for Encoder: Encoder HDG@SN-8ea-966
27/05/2020 18:31:38(953): Command: SetModule <1,3,0,284,7;>
27/05/2020 18:31:38(816): Command: SetModule <1,2,0,-1400,31;>
27/05/2020 18:31:38(616): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:31:38(474): Executing OnLeft: Encoder HDG@SN-8ea-966
27/05/2020 18:31:38(294): Config found for Encoder: Encoder HDG@SN-8ea-966
27/05/2020 18:31:38(112): Command: SetModule <1,3,0,283,7;>
27/05/2020 18:31:37(913): Command: SetModule <1,2,0,-1500,31;>
27/05/2020 18:31:37(714): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:31:37(531): Executing OnLeft: Encoder HDG@SN-8ea-966
27/05/2020 18:31:37(375): Config found for Encoder: Encoder HDG@SN-8ea-966
27/05/2020 18:31:37(238): Command: SetModule <1,2,0,-1600,31;>
27/05/2020 18:31:37(74): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:31:36(932): Executing OnLeft: Encoder HDG@SN-8ea-966
27/05/2020 18:31:36(795): Config found for Encoder: Encoder HDG@SN-8ea-966
27/05/2020 18:31:36(661): Command: SetModule <1,3,0,282,7;>
27/05/2020 18:31:36(521): Command: SetModule <1,2,0,-1700,31;>
27/05/2020 18:31:36(354): Command: SetModule <1,3,0,281,7;>
27/05/2020 18:31:36(180): Command: SetModule <1,2,0,-1800,31;>
27/05/2020 18:31:35(933): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:31:35(758): Executing OnLeft: Encoder HDG@SN-8ea-966
27/05/2020 18:31:35(580): Config found for Encoder: Encoder HDG@SN-8ea-966
27/05/2020 18:31:35(388): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:31:35(218): Executing OnLeft: Encoder HDG@SN-8ea-966
27/05/2020 18:31:35(35): Config found for Encoder: Encoder HDG@SN-8ea-966
27/05/2020 18:31:34(872): Command: SetModule <1,3,0,279,7;>
27/05/2020 18:31:34(701): Command: SetModule <1,2,0,-2000,31;>
27/05/2020 18:31:34(509): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:31:34(339): Executing OnLeft: Encoder HDG@SN-8ea-966
27/05/2020 18:31:34(167): Config found for Encoder: Encoder HDG@SN-8ea-966
27/05/2020 18:31:34(21): Command: SetModule <1,3,0,278,7;>
27/05/2020 18:31:33(886): Command: SetModule <1,2,0,-2100,31;>
27/05/2020 18:31:33(689): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:31:33(558): Executing OnLeft: Encoder HDG@SN-8ea-966
27/05/2020 18:31:33(419): Config found for Encoder: Encoder HDG@SN-8ea-966
27/05/2020 18:31:33(18): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:31:32(866): Executing OnLeft: Encoder HDG@SN-8ea-966
27/05/2020 18:31:32(704): Config found for Encoder: Encoder HDG@SN-8ea-966
27/05/2020 18:31:32(380): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:31:32(210): Executing OnLeft: Encoder HDG@SN-8ea-966
27/05/2020 18:31:32(50): Config found for Encoder: Encoder HDG@SN-8ea-966
27/05/2020 18:31:31(866): Command: SetModule <1,2,0,-2400,31;>
27/05/2020 18:31:31(676): Executing OnRelease: Button9@SN-8ea-966
27/05/2020 18:31:31(507): Command: SetModule <1,2,0,-2500,31;>
27/05/2020 18:31:31(308): Config found for Button: Button9@SN-8ea-966
27/05/2020 18:31:31(99): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:31:30(839): Executing OnPress: Button9@SN-8ea-966
27/05/2020 18:31:30(590): Config found for Button: Button9@SN-8ea-966
27/05/2020 18:31:30(389): Command: SetModule <1,2,0,-2600,31;>
27/05/2020 18:31:30(190): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:31:29(971): Executing OnLeft: Encoder VSPEED@SN-8ea-966
27/05/2020 18:31:29(758): Config found for Encoder: Encoder VSPEED@SN-8ea-966
27/05/2020 18:31:29(606): Command: SetModule <1,2,0,-2500,31;>
27/05/2020 18:31:29(393): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:31:29(195): Executing OnLeft: Encoder VSPEED@SN-8ea-966
27/05/2020 18:31:29(8): Config found for Encoder: Encoder VSPEED@SN-8ea-966
27/05/2020 18:31:28(785): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:31:28(573): Executing OnLeft: Encoder VSPEED@SN-8ea-966
27/05/2020 18:31:28(410): Command: SetModule <1,2,0,-2400,31;>
27/05/2020 18:31:28(202): Config found for Encoder: Encoder VSPEED@SN-8ea-966
27/05/2020 18:31:27(984): Command: SetModule <1,2,0,-2300,31;>
27/05/2020 18:31:27(761): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:31:27(555): Executing OnLeft: Encoder VSPEED@SN-8ea-966
27/05/2020 18:31:27(351): Config found for Encoder: Encoder VSPEED@SN-8ea-966
27/05/2020 18:31:27(122): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:31:26(923): Executing OnLeft: Encoder VSPEED@SN-8ea-966
27/05/2020 18:31:26(732): Command: SetModule <1,2,0,-2200,31;>
27/05/2020 18:31:26(510): Config found for Encoder: Encoder VSPEED@SN-8ea-966
27/05/2020 18:31:26(286): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:31:26(80): Executing OnLeft: Encoder VSPEED@SN-8ea-966
27/05/2020 18:31:25(874): Command: SetModule <1,2,0,-2100,31;>
27/05/2020 18:31:25(662): Config found for Encoder: Encoder VSPEED@SN-8ea-966
27/05/2020 18:31:25(417): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:31:25(206): Executing OnLeft: Encoder VSPEED@SN-8ea-966
27/05/2020 18:31:25(3): Command: SetModule <1,2,0,-2000,31;>
27/05/2020 18:31:24(781): Config found for Encoder: Encoder VSPEED@SN-8ea-966
27/05/2020 18:31:24(529): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:31:24(287): Command: SetModule <1,2,0,-1900,31;>
27/05/2020 18:31:24(28): Executing OnLeft: Encoder VSPEED@SN-8ea-966
27/05/2020 18:31:23(821): Config found for Encoder: Encoder VSPEED@SN-8ea-966
27/05/2020 18:31:23(566): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:31:23(343): Executing OnLeft: Encoder VSPEED@SN-8ea-966
27/05/2020 18:31:23(137): Command: SetModule <1,2,0,-1800,31;>
27/05/2020 18:31:22(888): Config found for Encoder: Encoder VSPEED@SN-8ea-966
27/05/2020 18:31:22(647): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:31:22(430): Executing OnLeft: Encoder VSPEED@SN-8ea-966
27/05/2020 18:31:22(231): Command: SetModule <1,2,0,-1700,31;>
27/05/2020 18:31:21(982): Config found for Encoder: Encoder VSPEED@SN-8ea-966
27/05/2020 18:31:21(774): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:31:21(571): Executing OnLeft: Encoder VSPEED@SN-8ea-966
27/05/2020 18:31:21(370): Command: SetModule <1,2,0,-1600,31;>
27/05/2020 18:31:21(155): Config found for Encoder: Encoder VSPEED@SN-8ea-966
27/05/2020 18:31:20(945): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:31:20(720): Command: SetModule <1,2,0,-1500,31;>
27/05/2020 18:31:20(515): Executing OnLeft: Encoder VSPEED@SN-8ea-966
27/05/2020 18:31:20(328): Config found for Encoder: Encoder VSPEED@SN-8ea-966
27/05/2020 18:31:20(111): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:31:19(861): Executing OnLeft: Encoder VSPEED@SN-8ea-966
27/05/2020 18:31:19(639): Command: SetModule <1,2,0,-1400,31;>
27/05/2020 18:31:19(391): Config found for Encoder: Encoder VSPEED@SN-8ea-966
27/05/2020 18:31:19(139): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:31:18(911): Executing OnLeft: Encoder VSPEED@SN-8ea-966
27/05/2020 18:31:18(718): Command: SetModule <1,2,0,-1300,31;>
27/05/2020 18:31:18(508): Config found for Encoder: Encoder VSPEED@SN-8ea-966
27/05/2020 18:31:18(242): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:31:18(63): Executing OnLeft: Encoder VSPEED@SN-8ea-966
27/05/2020 18:31:17(889): Command: SetModule <1,2,0,-1200,31;>
27/05/2020 18:31:17(659): Config found for Encoder: Encoder VSPEED@SN-8ea-966
27/05/2020 18:31:17(443): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:31:17(202): Executing OnLeft: Encoder VSPEED@SN-8ea-966
27/05/2020 18:31:16(972): Command: SetModule <1,2,0,-1100,31;>
27/05/2020 18:31:16(757): Config found for Encoder: Encoder VSPEED@SN-8ea-966
27/05/2020 18:31:16(543): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:31:16(320): Executing OnLeft: Encoder VSPEED@SN-8ea-966
27/05/2020 18:31:16(88): Command: SetModule <1,2,0,-1000,31;>
27/05/2020 18:31:15(857): Config found for Encoder: Encoder VSPEED@SN-8ea-966
27/05/2020 18:31:15(631): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:31:15(423): Command: SetModule <1,2,0,-0900,31;>
27/05/2020 18:31:15(191): Executing OnLeft: Encoder VSPEED@SN-8ea-966
27/05/2020 18:31:14(984): Config found for Encoder: Encoder VSPEED@SN-8ea-966
27/05/2020 18:31:14(739): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:31:14(563): Command: SetModule <1,2,0,-0800,31;>
27/05/2020 18:31:14(367): Executing OnLeft: Encoder VSPEED@SN-8ea-966
27/05/2020 18:31:14(165): Config found for Encoder: Encoder VSPEED@SN-8ea-966
27/05/2020 18:31:13(953): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:31:13(763): Command: SetModule <1,2,0,-0700,31;>
27/05/2020 18:31:13(556): Executing OnLeft: Encoder VSPEED@SN-8ea-966
27/05/2020 18:31:13(365): Config found for Encoder: Encoder VSPEED@SN-8ea-966
27/05/2020 18:31:13(127): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:31:12(948): Executing OnLeft: Encoder VSPEED@SN-8ea-966
27/05/2020 18:31:12(747): Command: SetModule <1,2,0,-0600,31;>
27/05/2020 18:31:12(550): Config found for Encoder: Encoder VSPEED@SN-8ea-966
27/05/2020 18:31:12(322): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:31:12(112): Executing OnLeft: Encoder VSPEED@SN-8ea-966
27/05/2020 18:31:11(916): Command: SetModule <1,2,0,-0500,31;>
27/05/2020 18:31:11(682): Config found for Encoder: Encoder VSPEED@SN-8ea-966
27/05/2020 18:31:11(474): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:31:11(262): Executing OnLeft: Encoder VSPEED@SN-8ea-966
27/05/2020 18:31:11(68): Command: SetModule <1,2,0,-0400,31;>
27/05/2020 18:31:10(899): Config found for Encoder: Encoder VSPEED@SN-8ea-966
27/05/2020 18:31:10(704): Command: SetModule <1,2,0,-0300,31;>
27/05/2020 18:31:10(494): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:31:10(297): Executing OnLeft: Encoder VSPEED@SN-8ea-966
27/05/2020 18:31:10(88): Config found for Encoder: Encoder VSPEED@SN-8ea-966
27/05/2020 18:31:09(866): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:31:09(669): Executing OnLeft: Encoder VSPEED@SN-8ea-966
27/05/2020 18:31:09(476): Command: SetModule <1,2,0,-0200,31;>
27/05/2020 18:31:09(232): Config found for Encoder: Encoder VSPEED@SN-8ea-966
27/05/2020 18:31:09(33): Command: SetModule <1,2,0,-0100,31;>
27/05/2020 18:31:08(782): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:31:08(548): Executing OnLeft: Encoder VSPEED@SN-8ea-966
27/05/2020 18:31:08(299): Config found for Encoder: Encoder VSPEED@SN-8ea-966
27/05/2020 18:31:08(67): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:31:07(821): Executing OnLeft: Encoder VSPEED@SN-8ea-966
27/05/2020 18:31:07(590): Config found for Encoder: Encoder VSPEED@SN-8ea-966
27/05/2020 18:31:07(370): Command: SetModule <1,3,0,.3000,248;>
27/05/2020 18:31:07(176): Executing OnRelease: Button9@SN-8ea-966
27/05/2020 18:31:06(988): Config found for Button: Button9@SN-8ea-966
27/05/2020 18:31:06(763): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:31:06(567): Executing OnLeft: Encoder ALT@SN-8ea-966
27/05/2020 18:31:06(379): Command: SetModule <1,3,0,.4000,248;>
27/05/2020 18:31:06(168): Config found for Encoder: Encoder ALT@SN-8ea-966
27/05/2020 18:31:05(946): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:31:05(710): Executing OnRight: Encoder ALT@SN-8ea-966
27/05/2020 18:31:05(495): Config found for Encoder: Encoder ALT@SN-8ea-966
27/05/2020 18:31:05(253): Command: SetModule <1,2,0, 0000,31;>
27/05/2020 18:31:04(986): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:31:04(766): Executing OnPress: Button9@SN-8ea-966
27/05/2020 18:31:04(581): Command: SetModule <1,3,0,.3000,248;>
27/05/2020 18:31:04(359): Command: SetModule <1,2,0,-0100,31;>
27/05/2020 18:31:04(146): Config found for Button: Button9@SN-8ea-966
27/05/2020 18:31:03(945): Executing OnRelease: Button9@SN-8ea-966
27/05/2020 18:31:03(765): Config found for Button: Button9@SN-8ea-966
27/05/2020 18:31:03(566): Command: SetModule <1,3,0,.4000,248;>
27/05/2020 18:31:03(356): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:31:03(160): Executing OnLeft: Encoder ALT@SN-8ea-966
27/05/2020 18:31:02(956): Config found for Encoder: Encoder ALT@SN-8ea-966
27/05/2020 18:31:02(759): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:31:02(479): Executing OnRight: Encoder ALT@SN-8ea-966
27/05/2020 18:31:02(305): Command: SetModule <1,3,0,.3000,248;>
27/05/2020 18:31:02(89): Config found for Encoder: Encoder ALT@SN-8ea-966
27/05/2020 18:31:01(851): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:31:01(659): Executing OnLeft: Encoder ALT@SN-8ea-966
27/05/2020 18:31:01(471): Config found for Encoder: Encoder ALT@SN-8ea-966
27/05/2020 18:31:01(248): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:31:01(30): Executing OnPress: Button9@SN-8ea-966
27/05/2020 18:31:00(825): Config found for Button: Button9@SN-8ea-966
27/05/2020 18:31:00(620): Command: SetModule <1,3,0,.4000,248;>
27/05/2020 18:31:00(160): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:30:59(952): Executing OnRight: Encoder ALT@SN-8ea-966
27/05/2020 18:30:59(770): Command: SetModule <1,3,0,.3000,248;>
27/05/2020 18:30:59(569): Config found for Encoder: Encoder ALT@SN-8ea-966
27/05/2020 18:30:59(354): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:30:59(169): Executing OnLeft: Encoder ALT@SN-8ea-966
27/05/2020 18:30:58(976): Config found for Encoder: Encoder ALT@SN-8ea-966
27/05/2020 18:30:51(887): Command: SetModule <1,2,0, 0000,31;>
27/05/2020 18:30:50(908): Command: SetModule <1,2,0,-0100,31;>
27/05/2020 18:30:49(150): Command: SetModule <1,2,0,-0200,31;>
27/05/2020 18:30:48(813): Command: SetModule <1,2,0,-0300,31;>
27/05/2020 18:30:47(306): Command: SetModule <1,2,0,-0200,31;>
27/05/2020 18:30:46(510): Command: SetModule <1,2,0,-0100,31;>
27/05/2020 18:30:45(316): Command: SetModule <1,2,0, 0000,31;>
27/05/2020 18:30:44(551): Command: SetModule <1,2,0, 0100,31;>
27/05/2020 18:30:43(908): Command: SetModule <1,2,0, 0200,31;>
27/05/2020 18:30:42(915): Command: SetModule <1,2,0, 0300,31;>
27/05/2020 18:30:42(464): Executing OnRelease: Button20@SN-8ea-966
27/05/2020 18:30:42(265): Config found for Button: Button20@SN-8ea-966
27/05/2020 18:30:41(806): Executing OnPress: Button20@SN-8ea-966
27/05/2020 18:30:41(628): Config found for Button: Button20@SN-8ea-966
27/05/2020 18:30:41(446): Executing OnRelease: Button19@SN-8ea-966
27/05/2020 18:30:41(247): Config found for Button: Button19@SN-8ea-966
27/05/2020 18:30:41(40): Command: SetModule <1,2,0, 0400,31;>
27/05/2020 18:30:40(481): Command: SetModule <1,2,0, 0300,31;>
27/05/2020 18:30:40(279): Executing OnPress: Button19@SN-8ea-966
27/05/2020 18:30:40(82): Config found for Button: Button19@SN-8ea-966
27/05/2020 18:30:39(877): Executing OnRelease: Button18@SN-8ea-966
27/05/2020 18:30:39(685): Config found for Button: Button18@SN-8ea-966
27/05/2020 18:30:39(308): Command: SetModule <1,2,0, 0200,31;>
27/05/2020 18:30:38(874): Command: SetModule <1,2,0, 0100,31;>
27/05/2020 18:30:38(307): Executing OnPress: Button18@SN-8ea-966
27/05/2020 18:30:38(110): Config found for Button: Button18@SN-8ea-966
27/05/2020 18:30:37(866): Executing OnRelease: Button17@SN-8ea-966
27/05/2020 18:30:37(655): Config found for Button: Button17@SN-8ea-966
27/05/2020 18:30:37(450): Command: SetModule <1,2,0, 0000,31;>
27/05/2020 18:30:36(235): Command: SetModule <1,2,0,-0100,31;>
27/05/2020 18:30:34(968): Executing OnPress: Button17@SN-8ea-966
27/05/2020 18:30:34(781): Config found for Button: Button17@SN-8ea-966
27/05/2020 18:30:34(575): Executing OnRelease: Button18@SN-8ea-966
27/05/2020 18:30:34(367): Config found for Button: Button18@SN-8ea-966
27/05/2020 18:30:33(601): Command: SetModule <1,2,0,-0200,31;>
27/05/2020 18:30:33(378): Executing OnPress: Button18@SN-8ea-966
27/05/2020 18:30:33(178): Config found for Button: Button18@SN-8ea-966
27/05/2020 18:30:32(968): Executing OnRelease: Button19@SN-8ea-966
27/05/2020 18:30:32(754): Config found for Button: Button19@SN-8ea-966
27/05/2020 18:30:32(90): Executing OnPress: Button19@SN-8ea-966
27/05/2020 18:30:31(875): Config found for Button: Button19@SN-8ea-966
27/05/2020 18:30:31(684): Executing OnRelease: Button20@SN-8ea-966
27/05/2020 18:30:31(488): Config found for Button: Button20@SN-8ea-966
27/05/2020 18:30:31(212): Command: SetModule <1,2,0,-0100,31;>
27/05/2020 18:30:30(830): Executing OnPress: Button20@SN-8ea-966
27/05/2020 18:30:30(650): Config found for Button: Button20@SN-8ea-966
27/05/2020 18:30:30(458): Executing OnRelease: Button20@SN-8ea-966
27/05/2020 18:30:30(277): Config found for Button: Button20@SN-8ea-966
27/05/2020 18:30:30(98): Executing OnPress: Button20@SN-8ea-966
27/05/2020 18:30:29(914): Config found for Button: Button20@SN-8ea-966
27/05/2020 18:30:29(731): Executing OnRelease: Button19@SN-8ea-966
27/05/2020 18:30:29(533): Config found for Button: Button19@SN-8ea-966
27/05/2020 18:30:29(340): Executing OnPress: Button19@SN-8ea-966
27/05/2020 18:30:29(150): Config found for Button: Button19@SN-8ea-966
27/05/2020 18:30:28(966): Executing OnRelease: Button18@SN-8ea-966
27/05/2020 18:30:28(783): Config found for Button: Button18@SN-8ea-966
27/05/2020 18:30:28(576): Executing OnPress: Button18@SN-8ea-966
27/05/2020 18:30:28(390): Config found for Button: Button18@SN-8ea-966
27/05/2020 18:30:28(185): Executing OnRelease: Button17@SN-8ea-966
27/05/2020 18:30:28(4): Config found for Button: Button17@SN-8ea-966
27/05/2020 18:30:26(972): Command: SetModule <1,3,0,276,7;>
27/05/2020 18:30:26(793): Command: SetModule <1,3,0,253,7;>
27/05/2020 18:30:26(606): Command: SetModule <1,3,0,250,7;>
27/05/2020 18:30:26(392): Command: SetModule <1,3,0,247,7;>
27/05/2020 18:30:25(872): Command: SetModule <1,3,0,246,7;>
27/05/2020 18:30:25(677): Command: SetModule <1,3,0,214,7;>
27/05/2020 18:30:25(488): Command: SetModule <1,3,0,202,7;>
27/05/2020 18:30:25(301): Command: SetModule <1,3,0,181,7;>
27/05/2020 18:30:24(734): Command: SetModule <1,3,0,178,7;>
27/05/2020 18:30:24(537): Command: SetModule <1,3,0,176,7;>
27/05/2020 18:30:07(573): Command: SetModule <1,2,0, 0000,31;>
27/05/2020 18:30:00(589): Command: SetModule <1,2,0,-0100,31;>
27/05/2020 18:29:55(22): Command: SetModule <1,2,0,-0200,31;>
27/05/2020 18:29:51(64): Command: SetModule <1,2,0,-0300,31;>
27/05/2020 18:29:47(999): Command: SetModule <1,2,0,-0400,31;>
27/05/2020 18:29:44(611): Command: SetModule <1,2,0,-0300,31;>
27/05/2020 18:29:42(876): Command: SetModule <1,2,0,-0400,31;>
27/05/2020 18:29:38(280): Command: SetModule <1,2,0,-0500,31;>
27/05/2020 18:29:37(393): Command: SetModule <1,2,0,-0400,31;>
27/05/2020 18:29:35(418): Command: SetModule <1,2,0,-0500,31;>
27/05/2020 18:29:34(550): Command: SetModule <1,2,0,-0600,31;>
27/05/2020 18:29:33(887): Command: SetModule <1,2,0,-0700,31;>
27/05/2020 18:29:33(353): Command: SetModule <1,2,0,-0800,31;>
27/05/2020 18:29:32(702): Command: SetModule <1,2,0,-0900,31;>
27/05/2020 18:29:32(255): Command: SetModule <1,2,0,-1000,31;>
27/05/2020 18:29:31(378): Command: SetModule <1,2,0,-1100,31;>
27/05/2020 18:29:31(180): Command: SetModule <1,2,0,-1200,31;>
27/05/2020 18:29:29(868): Command: SetModule <1,2,0,-1100,31;>
27/05/2020 18:29:28(767): Command: SetModule <1,2,0,-1200,31;>
27/05/2020 18:28:29(186): Command: SetModule <1,2,0,240,224;>
27/05/2020 18:28:29(4): Preventing entering EnergySaving Mode: KeepAlive!
27/05/2020 18:28:28(814): Preventing entering EnergySaving Mode: KeepAlive!
27/05/2020 18:26:24(175): Command: SetModule <1,3,0,174,7;>
27/05/2020 18:26:23(979): Command: SetModule <1,3,0,176,7;>
27/05/2020 18:26:23(773): Command: SetModule <1,3,0,206,7;>
27/05/2020 18:26:23(589): Command: SetModule <1,3,0,236,7;>
27/05/2020 18:26:22(67): Command: SetModule <1,2,0,-1300,31;>
27/05/2020 18:26:21(831): Command: SetModule <1,2,0,-1500,31;>
27/05/2020 18:26:21(609): Command: SetModule <1,3,0,247,7;>
27/05/2020 18:26:21(81): Command: SetModule <1,3,0,249,7;>
27/05/2020 18:26:20(922): Command: SetModule <1,3,0,252,7;>
27/05/2020 18:26:20(751): Command: SetModule <1,3,0,253,7;>
27/05/2020 18:26:20(598): Command: SetModule <1,2,0,-1800,31;>
27/05/2020 18:26:20(418): Command: SetModule <1,3,0,254,7;>
27/05/2020 18:26:16(926): Command: SetModule <1,2,0,-1700,31;>
27/05/2020 18:26:15(64): Command: SetModule <1,2,0,-1600,31;>
27/05/2020 18:26:09(467): Command: SetModule <1,2,0,-1700,31;>
27/05/2020 18:26:09(267): Command: SetModule <1,2,0,-1800,31;>
27/05/2020 18:26:02(157): Command: SetModule <1,2,0,-1700,31;>
27/05/2020 18:26:00(397): Command: SetModule <1,2,0,-1800,31;>
27/05/2020 18:25:57(460): Command: SetModule <1,2,0,-1700,31;>
27/05/2020 18:25:55(686): Command: SetModule <1,2,0,-1600,31;>
27/05/2020 18:25:53(609): Command: SetModule <1,2,0,-1500,31;>
27/05/2020 18:25:42(236): Command: SetModule <1,2,0,-1400,31;>
27/05/2020 18:25:39(82): Command: SetModule <1,2,0,-1300,31;>
27/05/2020 18:25:36(881): Command: SetModule <1,2,0,-1200,31;>
27/05/2020 18:25:34(358): Command: SetModule <1,2,0,-1100,31;>
27/05/2020 18:25:33(168): Command: SetModule <1,2,0,-1000,31;>
27/05/2020 18:25:29(664): Command: SetModule <1,2,0,-0900,31;>
27/05/2020 18:25:27(802): Command: SetModule <1,2,0,-1000,31;>
27/05/2020 18:25:27(45): Command: SetModule <1,2,0,-1100,31;>
27/05/2020 18:25:26(387): Command: SetModule <1,2,0,-1200,31;>
27/05/2020 18:25:25(734): Command: SetModule <1,2,0,-1300,31;>
27/05/2020 18:25:24(732): Command: SetModule <1,2,0,-1400,31;>
27/05/2020 18:25:23(854): Command: SetModule <1,2,0,-1500,31;>
27/05/2020 18:25:22(118): Command: SetModule <1,2,0,-1600,31;>
27/05/2020 18:25:21(36): Command: SetModule <1,2,0,-1500,31;>
27/05/2020 18:25:20(367): Command: SetModule <1,2,0,-1400,31;>
27/05/2020 18:25:19(928): Command: SetModule <1,2,0,-1300,31;>
27/05/2020 18:25:19(272): Command: SetModule <1,2,0,-1200,31;>
27/05/2020 18:25:18(520): Command: SetModule <1,2,0,-1100,31;>
27/05/2020 18:25:17(978): Command: SetModule <1,2,0,-1000,31;>
27/05/2020 18:25:17(307): Command: SetModule <1,2,0,-0900,31;>
27/05/2020 18:25:16(429): Command: SetModule <1,2,0,-0800,31;>
27/05/2020 18:25:15(995): No config found for Button: Button24@SN-8ea-966
27/05/2020 18:25:15(818): Command: SetModule <1,3,0,256,7;>
27/05/2020 18:25:15(634): No config found for Button: Button24@SN-8ea-966
27/05/2020 18:25:15(440): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:25:15(260): Executing OnLeft: Encoder HDG@SN-8ea-966
27/05/2020 18:25:15(84): Command: SetModule <1,3,0,255,7;>
27/05/2020 18:25:14(884): Config found for Encoder: Encoder HDG@SN-8ea-966
27/05/2020 18:25:14(680): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:25:14(500): Executing OnLeft: Encoder HDG@SN-8ea-966
27/05/2020 18:25:14(326): Command: SetModule <1,3,0,254,7;>
27/05/2020 18:25:14(108): Config found for Encoder: Encoder HDG@SN-8ea-966
27/05/2020 18:25:13(857): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:25:13(668): Executing OnLeft: Encoder HDG@SN-8ea-966
27/05/2020 18:25:13(492): Command: SetModule <1,3,0,253,7;>
27/05/2020 18:25:13(296): Config found for Encoder: Encoder HDG@SN-8ea-966
27/05/2020 18:25:13(107): Command: SetModule <1,3,0,252,7;>
27/05/2020 18:25:12(909): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:25:12(705): Executing OnLeft: Encoder HDG@SN-8ea-966
27/05/2020 18:25:12(534): Config found for Encoder: Encoder HDG@SN-8ea-966
27/05/2020 18:25:12(319): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:25:12(141): Executing OnLeft: Encoder HDG@SN-8ea-966
27/05/2020 18:25:11(966): Command: SetModule <1,3,0,251,7;>
27/05/2020 18:25:11(774): Config found for Encoder: Encoder HDG@SN-8ea-966
27/05/2020 18:25:11(591): Command: SetModule <1,3,0,250,7;>
27/05/2020 18:25:11(400): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:25:11(212): Executing OnLeft: Encoder HDG@SN-8ea-966
27/05/2020 18:25:11(29): Config found for Encoder: Encoder HDG@SN-8ea-966
27/05/2020 18:25:10(826): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:25:10(647): Command: SetModule <1,3,0,249,7;>
27/05/2020 18:25:10(464): Executing OnLeft: Encoder HDG@SN-8ea-966
27/05/2020 18:25:10(272): Config found for Encoder: Encoder HDG@SN-8ea-966
27/05/2020 18:25:10(58): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:25:09(869): Command: SetModule <1,3,0,248,7;>
27/05/2020 18:25:09(670): Executing OnLeft: Encoder HDG@SN-8ea-966
27/05/2020 18:25:09(464): Config found for Encoder: Encoder HDG@SN-8ea-966
27/05/2020 18:25:09(260): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:25:09(69): Executing OnLeft: Encoder HDG@SN-8ea-966
27/05/2020 18:25:08(892): Command: SetModule <1,3,0,247,7;>
27/05/2020 18:25:08(688): Config found for Encoder: Encoder HDG@SN-8ea-966
27/05/2020 18:25:08(504): Command: SetModule <1,3,0,246,7;>
27/05/2020 18:25:08(317): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:25:08(146): Executing OnLeft: Encoder HDG@SN-8ea-966
27/05/2020 18:25:07(956): Config found for Encoder: Encoder HDG@SN-8ea-966
27/05/2020 18:25:07(724): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:25:07(543): Executing OnLeft: Encoder HDG@SN-8ea-966
27/05/2020 18:25:07(357): Command: SetModule <1,3,0,245,7;>
27/05/2020 18:25:07(165): Config found for Encoder: Encoder HDG@SN-8ea-966
27/05/2020 18:25:06(906): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:25:06(705): Executing OnLeft: Encoder HDG@SN-8ea-966
27/05/2020 18:25:06(524): Command: SetModule <1,3,0,244,7;>
27/05/2020 18:25:06(299): Config found for Encoder: Encoder HDG@SN-8ea-966
27/05/2020 18:25:06(61): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:25:05(881): Executing OnLeft: Encoder HDG@SN-8ea-966
27/05/2020 18:25:05(723): Command: SetModule <1,3,0,243,7;>
27/05/2020 18:25:05(514): Config found for Encoder: Encoder HDG@SN-8ea-966
27/05/2020 18:25:05(268): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:25:05(85): Command: SetModule <1,3,0,242,7;>
27/05/2020 18:25:04(890): Executing OnLeft: Encoder HDG@SN-8ea-966
27/05/2020 18:25:04(702): Config found for Encoder: Encoder HDG@SN-8ea-966
27/05/2020 18:25:04(485): Command: SetModule <1,3,0,241,7;>
27/05/2020 18:25:04(287): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:25:04(102): Executing OnLeft: Encoder HDG@SN-8ea-966
27/05/2020 18:25:03(917): Config found for Encoder: Encoder HDG@SN-8ea-966
27/05/2020 18:25:03(714): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:25:03(487): Executing OnLeft: Encoder HDG@SN-8ea-966
27/05/2020 18:25:03(311): Command: SetModule <1,3,0,240,7;>
27/05/2020 18:25:03(115): Config found for Encoder: Encoder HDG@SN-8ea-966
27/05/2020 18:25:02(881): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:25:02(657): Executing OnLeft: Encoder HDG@SN-8ea-966
27/05/2020 18:25:02(457): Config found for Encoder: Encoder HDG@SN-8ea-966
27/05/2020 18:25:02(289): Command: SetModule <1,3,0,239,7;>
27/05/2020 18:25:02(95): Command: SetModule <1,3,0,238,7;>
27/05/2020 18:25:01(880): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:25:01(698): Executing OnLeft: Encoder HDG@SN-8ea-966
27/05/2020 18:25:01(507): Config found for Encoder: Encoder HDG@SN-8ea-966
27/05/2020 18:25:01(285): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:25:01(83): Executing OnLeft: Encoder HDG@SN-8ea-966
27/05/2020 18:25:00(921): Command: SetModule <1,3,0,237,7;>
27/05/2020 18:25:00(734): Config found for Encoder: Encoder HDG@SN-8ea-966
27/05/2020 18:25:00(526): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:25:00(321): Executing OnLeft: Encoder HDG@SN-8ea-966
27/05/2020 18:25:00(141): Command: SetModule <1,3,0,236,7;>
27/05/2020 18:24:59(933): Config found for Encoder: Encoder HDG@SN-8ea-966
27/05/2020 18:24:59(725): Command: SetModule <1,3,0,235,7;>
27/05/2020 18:24:59(532): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:24:59(369): Executing OnLeft: Encoder HDG@SN-8ea-966
27/05/2020 18:24:59(201): Config found for Encoder: Encoder HDG@SN-8ea-966
27/05/2020 18:24:58(996): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:24:58(817): Executing OnLeft: Encoder HDG@SN-8ea-966
27/05/2020 18:24:58(652): Config found for Encoder: Encoder HDG@SN-8ea-966
27/05/2020 18:24:58(470): Command: SetModule <1,3,0,234,7;>
27/05/2020 18:24:58(266): Command: SetModule <1,3,0,233,7;>
27/05/2020 18:24:58(75): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:24:57(900): Executing OnLeft: Encoder HDG@SN-8ea-966
27/05/2020 18:24:57(736): Config found for Encoder: Encoder HDG@SN-8ea-966
27/05/2020 18:24:57(505): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:24:57(314): Executing OnLeft: Encoder HDG@SN-8ea-966
27/05/2020 18:24:57(113): Command: SetModule <1,3,0,232,7;>
27/05/2020 18:24:56(922): Config found for Encoder: Encoder HDG@SN-8ea-966
27/05/2020 18:24:56(698): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:24:56(504): Executing OnLeft: Encoder HDG@SN-8ea-966
27/05/2020 18:24:56(333): Command: SetModule <1,3,0,231,7;>
27/05/2020 18:24:56(121): Config found for Encoder: Encoder HDG@SN-8ea-966
27/05/2020 18:24:55(940): Command: SetModule <1,3,0,230,7;>
27/05/2020 18:24:55(755): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:24:55(577): Executing OnLeft: Encoder HDG@SN-8ea-966
27/05/2020 18:24:55(411): Config found for Encoder: Encoder HDG@SN-8ea-966
27/05/2020 18:24:55(232): Command: SetModule <1,3,0,229,7;>
27/05/2020 18:24:55(48): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:24:54(889): Executing OnLeft: Encoder HDG@SN-8ea-966
27/05/2020 18:24:54(721): Config found for Encoder: Encoder HDG@SN-8ea-966
27/05/2020 18:24:54(499): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:24:54(304): Executing OnLeft: Encoder HDG@SN-8ea-966
27/05/2020 18:24:54(77): Command: SetModule <1,3,0,228,7;>
27/05/2020 18:24:53(900): Config found for Encoder: Encoder HDG@SN-8ea-966
27/05/2020 18:24:53(693): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:24:53(498): Command: SetModule <1,3,0,227,7;>
27/05/2020 18:24:53(332): Executing OnLeft: Encoder HDG@SN-8ea-966
27/05/2020 18:24:53(140): Config found for Encoder: Encoder HDG@SN-8ea-966
27/05/2020 18:24:52(935): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:24:52(759): Executing OnLeft: Encoder HDG@SN-8ea-966
27/05/2020 18:24:52(577): Command: SetModule <1,3,0,226,7;>
27/05/2020 18:24:52(380): Config found for Encoder: Encoder HDG@SN-8ea-966
27/05/2020 18:24:52(178): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:24:52(11): Command: SetModule <1,3,0,225,7;>
27/05/2020 18:24:51(816): Executing OnLeft: Encoder HDG@SN-8ea-966
27/05/2020 18:24:51(638): Config found for Encoder: Encoder HDG@SN-8ea-966
27/05/2020 18:24:51(436): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:24:51(259): Command: SetModule <1,3,0,224,7;>
27/05/2020 18:24:51(66): Executing OnLeft: Encoder HDG@SN-8ea-966
27/05/2020 18:24:50(892): Config found for Encoder: Encoder HDG@SN-8ea-966
27/05/2020 18:24:50(697): Command: SetModule <1,3,0,223,7;>
27/05/2020 18:24:50(508): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:24:50(351): Executing OnLeft: Encoder HDG@SN-8ea-966
27/05/2020 18:24:50(170): Config found for Encoder: Encoder HDG@SN-8ea-966
27/05/2020 18:24:49(986): Command: SetModule <1,3,0,222,7;>
27/05/2020 18:24:49(777): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:24:49(597): Executing OnLeft: Encoder HDG@SN-8ea-966
27/05/2020 18:24:49(426): Config found for Encoder: Encoder HDG@SN-8ea-966
27/05/2020 18:24:49(250): Command: SetModule <1,3,0,221,7;>
27/05/2020 18:24:49(48): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:24:48(869): Executing OnLeft: Encoder HDG@SN-8ea-966
27/05/2020 18:24:48(688): Config found for Encoder: Encoder HDG@SN-8ea-966
27/05/2020 18:24:48(476): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:24:48(291): Executing OnLeft: Encoder HDG@SN-8ea-966
27/05/2020 18:24:48(101): Command: SetModule <1,3,0,220,7;>
27/05/2020 18:24:47(926): Config found for Encoder: Encoder HDG@SN-8ea-966
27/05/2020 18:24:47(727): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:24:47(547): Command: SetModule <1,3,0,219,7;>
27/05/2020 18:24:47(347): Executing OnLeft: Encoder HDG@SN-8ea-966
27/05/2020 18:24:47(189): Config found for Encoder: Encoder HDG@SN-8ea-966
27/05/2020 18:24:46(979): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:24:46(784): Executing OnLeft: Encoder HDG@SN-8ea-966
27/05/2020 18:24:46(602): Command: SetModule <1,3,0,218,7;>
27/05/2020 18:24:46(425): Config found for Encoder: Encoder HDG@SN-8ea-966
27/05/2020 18:24:46(251): Command: SetModule <1,3,0,217,7;>
27/05/2020 18:24:46(55): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:24:45(858): Executing OnLeft: Encoder HDG@SN-8ea-966
27/05/2020 18:24:45(661): Config found for Encoder: Encoder HDG@SN-8ea-966
27/05/2020 18:24:45(418): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:24:45(212): Executing OnLeft: Encoder HDG@SN-8ea-966
27/05/2020 18:24:45(18): Command: SetModule <1,3,0,216,7;>
27/05/2020 18:24:44(829): Config found for Encoder: Encoder HDG@SN-8ea-966
27/05/2020 18:24:44(619): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:24:44(446): Executing OnLeft: Encoder HDG@SN-8ea-966
27/05/2020 18:24:44(275): Command: SetModule <1,3,0,215,7;>
27/05/2020 18:24:44(76): Config found for Encoder: Encoder HDG@SN-8ea-966
27/05/2020 18:24:43(873): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:24:43(717): Executing OnLeft: Encoder HDG@SN-8ea-966
27/05/2020 18:24:43(538): Command: SetModule <1,3,0,214,7;>
27/05/2020 18:24:43(365): Config found for Encoder: Encoder HDG@SN-8ea-966
27/05/2020 18:24:43(187): Command: SetModule <1,3,0,213,7;>
27/05/2020 18:24:42(995): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:24:42(823): Executing OnLeft: Encoder HDG@SN-8ea-966
27/05/2020 18:24:42(647): Config found for Encoder: Encoder HDG@SN-8ea-966
27/05/2020 18:24:42(467): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:24:42(274): Executing OnLeft: Encoder HDG@SN-8ea-966
27/05/2020 18:24:42(83): Command: SetModule <1,3,0,212,7;>
27/05/2020 18:24:41(896): Config found for Encoder: Encoder HDG@SN-8ea-966
27/05/2020 18:24:41(708): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:24:41(542): Executing OnLeft: Encoder HDG@SN-8ea-966
27/05/2020 18:24:41(353): Command: SetModule <1,3,0,211,7;>
27/05/2020 18:24:41(191): Config found for Encoder: Encoder HDG@SN-8ea-966
27/05/2020 18:24:40(991): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:24:40(815): Executing OnLeft: Encoder HDG@SN-8ea-966
27/05/2020 18:24:40(631): Command: SetModule <1,3,0,210,7;>
27/05/2020 18:24:40(461): Config found for Encoder: Encoder HDG@SN-8ea-966
27/05/2020 18:24:40(287): Command: SetModule <1,3,0,209,7;>
27/05/2020 18:24:40(111): Command: SetModule <1,2,0,-0700,31;>
27/05/2020 18:24:39(935): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:24:39(782): Executing OnLeft: Encoder HDG@SN-8ea-966
27/05/2020 18:24:39(613): Config found for Encoder: Encoder HDG@SN-8ea-966
27/05/2020 18:24:39(435): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:24:39(265): Executing OnLeft: Encoder HDG@SN-8ea-966
27/05/2020 18:24:39(81): Command: SetModule <1,3,0,208,7;>
27/05/2020 18:24:38(897): Config found for Encoder: Encoder HDG@SN-8ea-966
27/05/2020 18:24:38(717): Command: SetModule <1,3,0,207,7;>
27/05/2020 18:24:38(560): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:24:38(382): Executing OnLeft: Encoder HDG@SN-8ea-966
27/05/2020 18:24:38(216): Config found for Encoder: Encoder HDG@SN-8ea-966
27/05/2020 18:24:38(41): Command: SetModule <1,3,0,206,7;>
27/05/2020 18:24:37(851): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:24:37(672): Executing OnLeft: Encoder HDG@SN-8ea-966
27/05/2020 18:24:37(504): Config found for Encoder: Encoder HDG@SN-8ea-966
27/05/2020 18:24:37(289): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:24:37(117): Command: SetModule <1,2,0,-0600,31;>
27/05/2020 18:24:36(933): Executing OnLeft: Encoder HDG@SN-8ea-966
27/05/2020 18:24:36(750): Command: SetModule <1,3,0,205,7;>
27/05/2020 18:24:36(563): Config found for Encoder: Encoder HDG@SN-8ea-966
27/05/2020 18:24:36(345): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:24:36(154): Executing OnLeft: Encoder HDG@SN-8ea-966
27/05/2020 18:24:35(967): Command: SetModule <1,3,0,204,7;>
27/05/2020 18:24:35(792): Config found for Encoder: Encoder HDG@SN-8ea-966
27/05/2020 18:24:35(633): Command: SetModule <1,2,0,-0700,31;>
27/05/2020 18:24:35(444): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:24:35(250): Executing OnLeft: Encoder HDG@SN-8ea-966
27/05/2020 18:24:35(82): Command: SetModule <1,3,0,203,7;>
27/05/2020 18:24:34(897): Config found for Encoder: Encoder HDG@SN-8ea-966
27/05/2020 18:24:34(713): Command: SetModule <1,2,0,-0800,31;>
27/05/2020 18:24:34(563): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:24:34(421): Command: SetModule <1,3,0,202,7;>
27/05/2020 18:24:34(269): Command: SetModule <1,2,0,-0900,31;>
27/05/2020 18:24:34(111): Executing OnLeft: Encoder HDG@SN-8ea-966
27/05/2020 18:24:33(802): Config found for Encoder: Encoder HDG@SN-8ea-966
27/05/2020 18:24:33(616): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:24:33(455): Command: SetModule <1,3,0,201,7;>
27/05/2020 18:24:33(308): Command: SetModule <1,2,0,-1000,31;>
27/05/2020 18:24:33(157): Executing OnLeft: Encoder HDG@SN-8ea-966
27/05/2020 18:24:33(27): Config found for Encoder: Encoder HDG@SN-8ea-966
27/05/2020 18:24:32(875): Command: SetModule <1,2,0,-1100,31;>
27/05/2020 18:24:32(723): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:24:32(576): Executing OnLeft: Encoder HDG@SN-8ea-966
27/05/2020 18:24:32(433): Command: SetModule <1,3,0,200,7;>
27/05/2020 18:24:32(301): Command: SetModule <1,2,0,-1200,31;>
27/05/2020 18:24:32(134): Config found for Encoder: Encoder HDG@SN-8ea-966
27/05/2020 18:24:31(956): Command: SetModule <1,3,0,199,7;>
27/05/2020 18:24:31(806): Command: SetModule <1,2,0,-1300,31;>
27/05/2020 18:24:31(650): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:24:31(502): Executing OnLeft: Encoder HDG@SN-8ea-966
27/05/2020 18:24:31(349): Config found for Encoder: Encoder HDG@SN-8ea-966
27/05/2020 18:24:31(192): Command: SetModule <1,2,0,-1400,31;>
27/05/2020 18:24:31(20): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:24:30(846): Executing OnLeft: Encoder HDG@SN-8ea-966
27/05/2020 18:24:30(685): Command: SetModule <1,3,0,198,7;>
27/05/2020 18:24:30(521): Command: SetModule <1,2,0,-1500,31;>
27/05/2020 18:24:30(360): Config found for Encoder: Encoder HDG@SN-8ea-966
27/05/2020 18:24:30(205): Command: SetModule <1,2,0,-1600,31;>
27/05/2020 18:24:30(45): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:24:29(895): Executing OnLeft: Encoder HDG@SN-8ea-966
27/05/2020 18:24:29(727): Command: SetModule <1,3,0,197,7;>
27/05/2020 18:24:29(557): Config found for Encoder: Encoder HDG@SN-8ea-966
27/05/2020 18:24:29(388): Command: SetModule <1,2,0,-1700,31;>
27/05/2020 18:24:29(219): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:24:29(59): Executing OnLeft: Encoder HDG@SN-8ea-966
27/05/2020 18:24:28(918): Command: SetModule <1,3,0,196,7;>
27/05/2020 18:24:28(762): Config found for Encoder: Encoder HDG@SN-8ea-966
27/05/2020 18:24:28(606): Command: SetModule <1,2,0,-1800,31;>
27/05/2020 18:24:28(437): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:24:28(277): Executing OnLeft: Encoder HDG@SN-8ea-966
27/05/2020 18:24:28(127): Command: SetModule <1,3,0,195,7;>
27/05/2020 18:24:27(971): Config found for Encoder: Encoder HDG@SN-8ea-966
27/05/2020 18:24:27(824): Command: SetModule <1,2,0,-1900,31;>
27/05/2020 18:24:27(656): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:24:27(498): Executing OnLeft: Encoder HDG@SN-8ea-966
27/05/2020 18:24:27(343): Command: SetModule <1,3,0,194,7;>
27/05/2020 18:24:27(191): Config found for Encoder: Encoder HDG@SN-8ea-966
27/05/2020 18:24:27(44): Command: SetModule <1,3,0,193,7;>
27/05/2020 18:24:26(873): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:24:26(731): Executing OnLeft: Encoder HDG@SN-8ea-966
27/05/2020 18:24:26(589): Command: SetModule <1,2,0,-2000,31;>
27/05/2020 18:24:26(430): Config found for Encoder: Encoder HDG@SN-8ea-966
27/05/2020 18:24:26(265): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:24:26(117): Executing OnLeft: Encoder HDG@SN-8ea-966
27/05/2020 18:24:25(969): Command: SetModule <1,3,0,192,7;>
27/05/2020 18:24:25(819): Config found for Encoder: Encoder HDG@SN-8ea-966
27/05/2020 18:24:25(672): Command: SetModule <1,3,0,191,7;>
27/05/2020 18:24:25(539): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:24:25(394): Executing OnLeft: Encoder HDG@SN-8ea-966
27/05/2020 18:24:25(251): Config found for Encoder: Encoder HDG@SN-8ea-966
27/05/2020 18:24:25(106): Command: SetModule <1,2,0,-2100,31;>
27/05/2020 18:24:24(943): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:24:24(793): Executing OnLeft: Encoder HDG@SN-8ea-966
27/05/2020 18:24:24(652): Command: SetModule <1,3,0,190,7;>
27/05/2020 18:24:24(483): Config found for Encoder: Encoder HDG@SN-8ea-966
27/05/2020 18:24:24(308): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:24:24(164): Executing OnLeft: Encoder HDG@SN-8ea-966
27/05/2020 18:24:24(24): Command: SetModule <1,3,0,189,7;>
27/05/2020 18:24:23(845): Config found for Encoder: Encoder HDG@SN-8ea-966
27/05/2020 18:24:23(694): Command: SetModule <1,3,0,188,7;>
27/05/2020 18:24:23(547): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:24:23(408): Executing OnLeft: Encoder HDG@SN-8ea-966
27/05/2020 18:24:23(249): Config found for Encoder: Encoder HDG@SN-8ea-966
27/05/2020 18:24:23(72): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:24:22(932): Executing OnLeft: Encoder HDG@SN-8ea-966
27/05/2020 18:24:22(790): Command: SetModule <1,3,0,187,7;>
27/05/2020 18:24:22(638): Config found for Encoder: Encoder HDG@SN-8ea-966
27/05/2020 18:24:22(451): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:24:22(306): Executing OnLeft: Encoder HDG@SN-8ea-966
27/05/2020 18:24:22(149): Command: SetModule <1,3,0,186,7;>
27/05/2020 18:24:22(8): Config found for Encoder: Encoder HDG@SN-8ea-966
27/05/2020 18:24:21(858): Command: SetModule <1,2,0,-2200,31;>
27/05/2020 18:24:21(718): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:24:21(572): Command: SetModule <1,3,0,185,7;>
27/05/2020 18:24:21(427): Executing OnLeft: Encoder HDG@SN-8ea-966
27/05/2020 18:24:21(287): Config found for Encoder: Encoder HDG@SN-8ea-966
27/05/2020 18:24:21(137): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:24:21(5): Command: SetModule <1,3,0,184,7;>
27/05/2020 18:24:20(863): Executing OnLeft: Encoder HDG@SN-8ea-966
27/05/2020 18:24:20(711): Config found for Encoder: Encoder HDG@SN-8ea-966
27/05/2020 18:24:20(562): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:24:20(413): Executing OnLeft: Encoder HDG@SN-8ea-966
27/05/2020 18:24:20(273): Command: SetModule <1,3,0,183,7;>
27/05/2020 18:24:20(127): Command: SetModule <1,2,0,240,224;>
27/05/2020 18:24:19(965): Config found for Encoder: Encoder HDG@SN-8ea-966
27/05/2020 18:24:19(804): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:24:19(661): Executing OnLeft: Encoder HDG@SN-8ea-966
27/05/2020 18:24:19(520): Command: SetModule <1,3,0,182,7;>
27/05/2020 18:24:19(360): Config found for Encoder: Encoder HDG@SN-8ea-966
27/05/2020 18:24:19(198): LuaMacoInputAction:Execute : Calling macro MADDOG_X:L:FGCP_EVENT
27/05/2020 18:24:19(53): Command: SetModule <1,3,0,181,7;>
27/05/2020 18:24:18(882): Executing OnLeft: Encoder HDG@SN-8ea
2020-05-28 08:18
Avatar
pizman82
Moderator
From: ETSI, Germany
Posts: 3521
Supporter
As i said multiple times..... For me this Debug Reports are "chineese" and i don´t understand them.
Maybe Sebastian can see a information here.

Basicly.... If cockpits geting larger then sure there are more delays..... But normaly this is not affect verry hard.
We have users with high complex cockpits (20+ megas) and they work fine and without feelable delays.
Only problem (at the moment) is a extrem Loading time at startup from up to 5 Minutes. But if Mobiflight is finaly loaded it should work nearly in same speed as if you use just 2 Megas.

Also P3Dv4 is not problematic i think..... Most of uers work with P3D meanwhile..... the FSX guys go less and less every day.

As always.... If there are extrem delays.... Check if your Logging Mode is disabled. And get sure Polling rate is as high as possible ( 1 step before Issues occure).
Good Luck !
2020-05-28 16:51
icon