MobiFlight Community Support

Welcome to the forum for MobiFlight! Feel free to reach out to the community in case you have questions, issues or just want to share great ideas or details about your latest home cockpit project.

You like MobiFlight? Donate via PayPal and support the MobiFlight development. Thanks! 

icon
Avatar
Ridgeandgable
Posts: 124
hi guys

Can we use Pin 0 & 1? or do we start from pin 1 (tx)
2020-04-05 17:18
Avatar
pizman82
Moderator
From: ETSI, Germany
Posts: 3527
Supporter
No Official Statement....

But we recommend to NOT use Pin 0 and 1 .... Start with Pin 2 !!!!
Also not use AnalogPins whatever they are already implement since last patch.. Lots of User report Bugs there... So not use them until problems are solved !
Good Luck !
2020-04-05 17:27
Avatar
StephanHo
Moderator
From: EDDG, Germany
Posts: 1525
Supporter
Addendum:

You can only use the pins from the drop-down list and pin 0 and 1 are not in there ;)
Pin 0 and 1 were internal used to upload the firmware and the devices. These pins are TX0 and RX0 for a serial interface.
Grüße,
Stephan
2020-04-05 20:42
Avatar
pizman82
Moderator
From: ETSI, Germany
Posts: 3527
Supporter
Shame on me. :blush:

Did Sebastian remove that ??? If i remeber right in my First days while using Mobifligh, Pin 0 and Pin 1 was on that list. Never check if this have changed

Whatever.... Problem should be solved !
Good Luck !
2020-04-05 23:46
icon