MobiFlight Community Support

Welcome to the forum for MobiFlight! Feel free to reach out to the community in case you have questions, issues or just want to share great ideas or details about your latest home cockpit project.

You like MobiFlight? Donate via PayPal and support the MobiFlight development. Thanks! 

icon
Avatar
sisoffi
Posts: 73
Hi,
i tried to connect some encoders in new pins from 54 to 69.
seem to not work.
I use them:

http://www.leobodnar.com/shop/index.php?main_page=product_info&cPath=98_75&products_id=192&zenid=cb3fdcbaf312919bce637d992fd6a63d

and

http://www.leobodnar.com/shop/index.php?main_page=product_info&cPath=98_75&products_id=196

is new pins problem tha need to use before 53 or other?

thankyou very much for help
Simone
2020-04-01 16:19
Avatar
pizman82
Moderator
From: ETSI, Germany
Posts: 3732
Supporter
I not test this encoders.... But normaly they should work fine.
The easyest way to test if Encoder is compatible basicly would be a simple testing ( Pretty sure much faster as writing your Request here in forum :P )

Set your Encoders for testing on 2 Pins from 02-53 and make a simple Test Config like Standard Cessna and Com1 Increase Decrease.
If they work then Problem are Analog Pins. If not problem is maby the Encoder.
(Note the Dual is 1:2 the other is 1:1 .... As i read in your Link)
***********

Summary.
I would say Encoders work OK and are compatible.... BUT Analog Pins are buggy.
We report to Sebastian already other Problems with Analog Pins ..... But i think he have no time at the moment to check this.

Please report here when you make the testing and you can confirm Encoder re buggy on Analog Pins !
Good Luck !
2020-04-01 16:29
Avatar
Tiri74
From: EDDT, Berlin, Germany
Posts: 44
Hi...
I try it in English...
I´m testing an 8 Position Rotary Switch on Pin 54 to 58 ....it doesent work:-)
Same Rotary on Pin 2 to 6 works fine.
I Think The analog Pins are buggy ...

Let's give sebastian time to fix it... and.everything is going to be fine :)

Greets André

sorry for my bad English
always three greens
2020-04-23 16:49
Avatar
pizman82
Moderator
From: ETSI, Germany
Posts: 3732
Supporter
Yes they are! :cry:

Whatever not mix up.... A Rotary Switch and a Rotary Encoder is different.
But it looks like both will not work correctly at the moment!
Good Luck !
2020-04-24 02:07
icon