MobiFlight Community Support

Welcome to the forum for MobiFlight! Feel free to reach out to the community in case you have questions, issues or just want to share great ideas or details about your latest home cockpit project.

You like MobiFlight? Donate via PayPal and support the MobiFlight development. Thanks! 

icon
Avatar
Jeroen737
Posts: 3
Hello,

I am building my MCP and EFIS.
I Have all display and LED's working.
At the moment I am struggling with inputs, Mobiflight registers my switch position changed, but nothing is going through XPUIPC offsets to the SIM.
For example:
Command 0x6520 UINT8 1 0 laminar/B738/autopilot/autothrottle_arm_pos _ 1 1 laminar/B738/autopilot/autothrottle_arm_pos

Also tried:
Dataref ATARMSW laminar/B738/autopilot/autothrottle_arm_pos int
Offset 0x6520 UINT8 1 rw $ATARMSW
Command 0x6520 UINT8 1 0 laminar/B738/autopilot/autothrottle_arm_pos _ 1 1 laminar/B738/autopilot/autothrottle_arm_pos

No commands are being forwarded on 0x6520 to make changes in Xplane for the position of the A/T Arm switch
I tried to follow all the options that were given in the XPUIPC Offset Tutorial in this Forum, but still can't get it to work.
2020-03-04 20:18
icon