MobiFlight Community Support

To disable the FLT ALT and LAND ALT 7 segement LED displays using the battery switch - I'm confused about defining a pre-condition. The list of available configs only includes outputs, not inputs. How does one define a pre-condition based on the condition of a switch (ie, input) ?

Paul

UPDATE: I think I found the solution:

https://www.mobiflight.com/forum/message/5486.html

Problem solved, now just trying to remove the last digit "0" when power is off.

Paul

Hi
(I awnser in other topic already.)

Just to prevent missunderstandings.....
It is NOT possible to use a INPUT for a Precondition. The Precondition Tab ( and also Placeholders) ALWAYS use a Output Config !
So if you like to use the Master Battery Switch as Indication you will NOT use your real switch..... You will read the Offset of the Virtual Battery Switch !!!!

Normaly this work fine in 99% of Situations.... Only one exception..... If there exist no Virtual Switch ( e.g. in a dummy Radio Selector or so)
In That case we write with out switch a "Custom Offset" .....
Like Switch in OFF Position set Offset to 0 ..... Switch in ON Position set Offset to 1 .
To use this as a Precundition we will now read the SAME Offset in a output Config we also write with thi switch.

Final Logic is the same..... The Precondition/Placeholder Indicator again MUST be a Output Config !