MobiFlight Community Support

Welcome to the forum for MobiFlight! Feel free to reach out to the community in case you have questions, issues or just want to share great ideas or details about your latest home cockpit project.

You like MobiFlight? Donate via PayPal and support the MobiFlight development. Thanks!

05/03/2024 - This forum is read-only

The community support for MobiFlight has moved exclusively over to our Discord server. Register for free and enjoy more interactive functions like image and video upload, voice chat. More than 7,000 registered users around the world make it a great experience!

See you on our MobiFlight Community Discord server.

A HUGE Thank You to everyone who participated in the forum, especially obviously to Pizman and Stephan who did an outstanding job over so many years providing an incredible service to the MobiFlight community.

The forum is still providing a lot of good content, hence we keep this information accessible.

Message #13982

sisoffi

Posts: 91

hi, I haven't found a topic on the forum so far that deals with analog inputs. I wanted to ask for my project.
I have implemented the original 28v light bulbs of the annunciator through the analog ports of the mega 2560 managed by a relay card so that so many pins are freed that are used to not increase the number of Arduino boards.
Now my question is this, I'm trying to also connect the original gauges instruments of my overhead and I would try to connect the original motor or alternatively replace it with servos to the analog ports.
The servos from the mobiflight diagram must be connected to a pin (from 2 to 53). Can we connect them to an analog port instead? will it be seen then by mobiflight as for outputs via relay?

thankyou
Simone

2019-08-06 10:46

Message #13986

pizman82

Moderator

From: ETSI, Germany

Posts: 6010

Supporter

NO

Analog Pins are not supported now and also not planed in the future.

For more detailed information how you can set a "big" Servo with Mobiflight you should talk to Stephan.

Please if needed give us here exact data about the servos..... Name, manifacture, datasheet / Powerdetails

Good Luck !

2019-08-06 14:56