MobiFlight Community Support

Welcome to the forum for MobiFlight! Feel free to reach out to the community in case you have questions, issues or just want to share great ideas or details about your latest home cockpit project.

You like MobiFlight? Donate via PayPal and support the MobiFlight development. Thanks!

05/03/2024 - This forum is read-only

The community support for MobiFlight has moved exclusively over to our Discord server. Register for free and enjoy more interactive functions like image and video upload, voice chat. More than 7,000 registered users around the world make it a great experience!

See you on our MobiFlight Community Discord server.

A HUGE Thank You to everyone who participated in the forum, especially obviously to Pizman and Stephan who did an outstanding job over so many years providing an incredible service to the MobiFlight community.

The forum is still providing a lot of good content, hence we keep this information accessible.

Message #12366

slammer88

From: LTBJ, Turkey

Posts: 160

Hey,

Pretty much angry here! Just bought a micro pro to use with my custom made flap lever which has 9 detents, connected the cables, and whenever I upload the config with 9 buttons and set the eventid's for PMDG, after restart I see only 2 of them is available in the config section. I tried 1.8.0 firmware but the same result.

Seriously I can't waste another Mega just for 9 inputs. Sebastian has to work his way thru this, updating this software in every 6 months won't help anymore!

How da hell is only Mega supported seriously? It's not that the optimum solution for every situation. I've made a box, and it has really small empty space left, Pro Micro just fits there nicely, but I can't get any commands via Mobiflight even if I see the buttons working from the board (red flash goes on&off when I press the buttons).

2019-03-30 16:52

Message #12369

pizman82

Moderator

From: ETSI, Germany

Posts: 6010

Supporter

Hi

Again apollogy for your trouble....

If Space is the only problem check for the "Mega Pro Mini"
Thats a Arduino Mega but much more smaller..... No Pin Headers.... No USB Port and so on.
I not test it myself but basicly it should work like a Original or Clone Mega board.... But is maby 1/3 of size

https://de.aliexpress.com/item/TZT-Mega-2560-PRO-MINI-5-V-Embed-CH340G-ATmega2560-16AU-mit-m-nnlichen-pinheaders-Kompatibel/32969255283.html?albbt=Google_7_shopping&isdl=y&slnk=&albslr=225519109&src=google&acnt=494-037-6276&aff_platform=google&crea=de32969255283&netw=u&plac=&albcp=1705854617&mtctp=&aff_short_key=UneMJZVf&gclid=CjwKCAjwp_zkBRBBEiwAndwD9fqD-JFXe636_9qXLhYHJOmRUEHxrJSV3Vxg2pfLJgAY7jgI1hoKGRoCkJ8QAvD_BwE&albag=67310370915&albch=shopping&albagn=888888&trgt=296904914040&device=c&gclsrc=aw.ds

Good Luck !

2019-03-30 21:10