MobiFlight Community Support

Welcome to the forum for MobiFlight! Feel free to reach out to the community in case you have questions, issues or just want to share great ideas or details about your latest home cockpit project.

You like MobiFlight? Donate via PayPal and support the MobiFlight development. Thanks! 

Go to page 1Go to page 012Go to page 2Go to page 2
Avatar
mt.boek@hccnet.nl
Posts: 10
Supporter
Hello Sebastian,

First of all thanks for your very nice and much appreciated MobiFlight connector :thumbup:

After installing the new version, 7.0.0., my Mega isn't recognized anymore (as it was in 6.3.0).

It's name is shown as Arduino Mega 2560 (COM7)

The hardware id's show as:
USB\VID_2341&PID_0042&REV_0001
USB\VID_2341&PID_0042

Any suggestions?

Best Regards,
Marty.
2015-12-29 20:30
Avatar
DocMoebiuz
Moderator
From: NW of KPWK, United States
Posts: 1443
Loony reported the same error but after restarting MobiFlight it now works for him.

What Windows Version are you running?
Have a great day!
Sebastian

MobiFlight - Simply build your own home cockpit for your favorite flight sim - FSX, Prepar3D (FSUIPC), X-Plane (XPUIPC)
2015-12-29 22:45
Avatar
mt.boek@hccnet.nl
Posts: 10
Supporter
I did re-install the package, but no joy.

Running Windows 7.
2015-12-29 22:50
Avatar
DocMoebiuz
Moderator
From: NW of KPWK, United States
Posts: 1443
Please enable Debug under settings and set it to "debug"

Check the log messages for your vid pid combination or best share the output here.
Have a great day!
Sebastian

MobiFlight - Simply build your own home cockpit for your favorite flight sim - FSX, Prepar3D (FSUIPC), X-Plane (XPUIPC)
2015-12-30 00:11
Avatar
mt.boek@hccnet.nl
Posts: 10
Supporter
Hi Sebastian,


30-12-2015 19:59:20: Checking for updates
30-12-2015 19:59:20: MobiflightModule.disconnect: Disconnected MobiFlight Mega at COM7
30-12-2015 19:59:20: MobiFlightModule.GetInfo: MobiFlight Mega, MobiFlight Mega,1.4.1, SN-d74-085
30-12-2015 19:59:18: MobiflightModule.connect: Connected to Default at COM7
30-12-2015 19:59:18: Checking for compatible module: VID_8087&PID_0024
30-12-2015 19:59:18: Found potentially compatible module: VID_2341&PID_0042@COM7
30-12-2015 19:59:18: Checking for compatible module: VID_2341&PID_0042
30-12-2015 19:59:18: Checking for compatible module: VID_2237&PID_4173
30-12-2015 19:59:18: Checking for compatible module: VID_174C&PID_5106
30-12-2015 19:59:18: Checking for compatible module: VID_0FCE&PID_0172
30-12-2015 19:59:18: Checking for compatible module: VID_0951&PID_1693
30-12-2015 19:59:18: Checking for compatible module: VID_093A&PID_2510
30-12-2015 19:59:18: Checking for compatible module: VID_093A&PID_2500
30-12-2015 19:59:18: Incompatible module skipped: zūmo 590 - VID/PID: VID_091E&PID_4704
30-12-2015 19:59:18: Checking for compatible module: VID_091E&PID_4704
30-12-2015 19:59:18: Checking for compatible module: VID_091E&PID_2704
30-12-2015 19:59:18: Checking for compatible module: VID_091E&PID_23C0
30-12-2015 19:59:18: Checking for compatible module: VID_091E&PID_22F2
30-12-2015 19:59:18: Checking for compatible module: VID_091E&PID_2208
30-12-2015 19:59:18: Checking for compatible module: VID_091E&PID_0003
30-12-2015 19:59:18: Checking for compatible module: VID_07B4&PID_0118
30-12-2015 19:59:18: Checking for compatible module: Vid_06A3&Pid_0763
30-12-2015 19:59:18: Incompatible module skipped: Prolific USB-to-Serial Comm Port (COM4) - VID/PID: VID_067B&PID_2303
30-12-2015 19:59:18: Checking for compatible module: VID_067B&PID_2303
30-12-2015 19:59:18: Checking for compatible module: VID_058F&PID_6387
30-12-2015 19:59:18: Checking for compatible module: VID_04A9&PID_3285
30-12-2015 19:59:18: Checking for compatible module: VID_046D&PID_C52F&MI_01
30-12-2015 19:59:18: Checking for compatible module: VID_046D&PID_C52F&MI_00
30-12-2015 19:59:18: Checking for compatible module: VID_046D&PID_C52F
30-12-2015 19:59:18: Checking for compatible module: VID_046D&PID_C215
30-12-2015 19:59:18: Checking for compatible module: VID_046D&PID_C121
30-12-2015 19:59:18: Checking for compatible module: Vid_046D&Pid_0A07&MI_03
30-12-2015 19:59:18: Checking for compatible module: Vid_046D&Pid_0A07&MI_02
30-12-2015 19:59:18: Incompatible module skipped: Z-10 USB Speaker - VID/PID: Vid_046D&Pid_0A07&MI_00
30-12-2015 19:59:18: Checking for compatible module: Vid_046D&Pid_0A07&MI_00
30-12-2015 19:59:18: Checking for compatible module: Vid_046D&Pid_0A07
30-12-2015 19:59:18: Checking for compatible module: VID_0403&PID_6001
30-12-2015 19:59:18: Checking for compatible module: Vid_0000&Pid_0000
30-12-2015 19:59:18: Checking for compatible module: ROOT_HUB20
30-12-2015 19:59:18: ^(VID_1B4F&PID_9206|VID_2341&PID_0042|VID_2341&PID_0010|VID_8087&PID_0024|VID_1A86&PID_7523|VID_2A03&PID_0042)
30-12-2015 19:59:18: MainForm() : Logger initialized Debug


Looks like it is stuck looking for updates?

Greetings,
Marty.
[Last edited by mt.boek@hccnet.nl, 2015-12-30 20:00]
2015-12-30 19:48
Avatar
DocMoebiuz
Moderator
From: NW of KPWK, United States
Posts: 1443
Yes, that seems to be the case... after checking for updates, the tool then continues to connect to all the found boards. This is new in 7.0 because I ran into trouble when MF Connector was connecting to modules but the Software got shutdown for update. It made the process hang and the software update fail.

Do you have some firewall restriction for the Connector?

I will check whether I can change the logic in case there is a connection timeout, even though I was testing it with NO connection.
Have a great day!
Sebastian

MobiFlight - Simply build your own home cockpit for your favorite flight sim - FSX, Prepar3D (FSUIPC), X-Plane (XPUIPC)
2015-12-30 22:40
Avatar
whitesoft
Posts: 1
I have the same problem Mb 7.0 and Win 10.

Willem Blanken
The Netherlands
2015-12-31 14:51
Avatar
DocMoebiuz
Moderator
From: NW of KPWK, United States
Posts: 1443
Hi guys,

what happens if you explicitly let MobiFlight check for new updates (Help > Check for update) ??
Have a great day!
Sebastian

MobiFlight - Simply build your own home cockpit for your favorite flight sim - FSX, Prepar3D (FSUIPC), X-Plane (XPUIPC)
2015-12-31 16:35
Avatar
mt.boek@hccnet.nl
Posts: 10
Supporter
Hi Sebastian,

When I let MobiFlight check for updates, I get another line with "Checking for updates" in the debug window.

Greetz,
Marty.
2015-12-31 17:45
Avatar
DocMoebiuz
Moderator
From: NW of KPWK, United States
Posts: 1443
Please Check whether MF is blocked by your Firewall until I fix it.
Have a great day!
Sebastian

MobiFlight - Simply build your own home cockpit for your favorite flight sim - FSX, Prepar3D (FSUIPC), X-Plane (XPUIPC)
2015-12-31 18:14
Avatar
mt.boek@hccnet.nl
Posts: 10
Supporter
Hi Sebastian,

Switching off the Windows firewall and the firewall in the router doesn't help, please let me know if there are other things to check.

Greetz,
Marty.
2015-12-31 18:31
Avatar
DocMoebiuz
Moderator
From: NW of KPWK, United States
Posts: 1443
I will change the behavior during the next days. Sorry for any inconvenience.
Have a great day!
Sebastian

MobiFlight - Simply build your own home cockpit for your favorite flight sim - FSX, Prepar3D (FSUIPC), X-Plane (XPUIPC)
2015-12-31 22:35
Avatar
mt.boek@hccnet.nl
Posts: 10
Supporter
Hi Sebastian,

Thanks! Happy new year!

Greetz,
Marty.
2016-01-01 11:52
Avatar
DocMoebiuz
Moderator
From: NW of KPWK, United States
Posts: 1443
I released 7.0.1 with the fix.

Probably you don't have an internet connection on the PC where MF Connector is running.
Please confirm that it is working for you.
Have a great day!
Sebastian

MobiFlight - Simply build your own home cockpit for your favorite flight sim - FSX, Prepar3D (FSUIPC), X-Plane (XPUIPC)
2016-01-01 16:14
Avatar
mt.boek@hccnet.nl
Posts: 10
Supporter
1-1-2016 22:35:20: ExecutionManager.AutoConnectStart:Started auto connect timer
1-1-2016 22:35:20: Preventing entering EnergySaving Mode: KeepAlive!
1-1-2016 22:35:20: ExecutionManager.TestModeStop:Stopped test timer
1-1-2016 22:35:20: MobiFlightModule.GetInfo: MobiFlight Mega, MobiFlight Mega,1.4.1, SN-d74-085
1-1-2016 22:35:18: MobiflightModule.connect: Connected to Default at COM7
1-1-2016 22:35:18: MobiFlightCache.RegisterModule(Default:COM7)
1-1-2016 22:35:18: MobiFlightCache.connect: Clearing modules
1-1-2016 22:35:18: ExecutionManager.autoConnectTimer_Tick(): AutoConnect Modules
1-1-2016 22:35:18: No updates necessary. Your version: 7.0.1.0, Latest version: 7.0.1
1-1-2016 22:35:18: Checking for updates
1-1-2016 22:35:18: MobiflightModule.disconnect: Disconnected MobiFlight Mega at COM7

Works like a charm! Thanks Sebastian!

Greetz,
Marty.
2016-01-01 22:36
Go to page 1Go to page 012Go to page 2Go to page 2