MobiFlight Community Support

Welcome to the forum for MobiFlight! Feel free to reach out to the community in case you have questions, issues or just want to share great ideas or details about your latest home cockpit project.

You like MobiFlight? Donate via PayPal and support the MobiFlight development. Thanks! 

icon
Avatar
Ridgeandgable
Posts: 127
Hi Guys

I have my flaps gauge working with the servo using FSX and default 737, is there a way to change the direction as it opposite to the 737, instead of moving clockwise, I'm moving anti clockwise, I thought if I change the min value to 16383 and max value to 0 it would work, but it doesn't

Cheers?
2018-10-06 21:21
Avatar
pizman82
Moderator
From: ETSI, Germany
Posts: 4989
Supporter
Hi

Multiple Solutions are possible...

1. Hardware
If you just plan the gauge you can simply add a 1:1 Cogwheel. So Speed (moving range) is not change in case of 1:1 but direction change.

2. Software.
NOT Change the Min and Max Value .... Use the Intepolation Tab here.
(I not know if your gauge is linear and if you still use interpolation at the moment.... If yes you must include your needed interpolation in the follow logic)
Simply change Min/Max here. For example if your Flaps go from 0 (No Flaps) to 16383 (FULL) then say in interpolation ....
0=16383 and in second line you say 16383=0 .... Activate it by enable checkbox.
Now Mobiflight will calculate every value "reverse"
Good Luck !
2018-10-06 22:01
icon