MobiFlight Community Support

Welcome to the forum for MobiFlight! Feel free to reach out to the community in case you have questions, issues or just want to share great ideas or details about your latest home cockpit project.

You like MobiFlight? Donate via PayPal and support the MobiFlight development. Thanks! 

icon
Avatar
unvergoktug
Posts: 1
the connection ports are different which we have get could you help us about it. which is the same as the port in the software?

my screen outputs :
SO =
SI =
CS =
SCK =
GND =
VCC =
software outputs :
VCC
GNG
DIN
CD
CLK
2018-06-11 23:18
Avatar
StephanHo
From: EDDG, Germany
Posts: 1761
Supporter
Hi unvergoktug,

welcome to Mobiflight!

I would like to help you, but unfortunately the link to your picture is not ok. Can you check this please?
Grüße,
Stephan
2018-06-12 07:40
Avatar
pizman82
Moderator
From: ETSI, Germany
Posts: 4844
Supporter
Without seeing the Picture i can´t give you a 100% solution....
I Also think you have some "spelling mistakes" in your Posting.

iconunvergoktug:


software outputs :
VCC
GNG Here youe mean GND
DIN
CD Pretty shure you mean CS here... In Mobiflight System it named CS .... not CD.
CLK




Solution: ( Just idea.... Not garantee for 100% correct without recheck the picture)

SO = Means D-OUT The "Output" of the Max7219 to the "NEXT" Maxchip if you use a cascade daisy chain system
SI = Means D-IN ... The Conenctor where you set to the DIN Pin you choose in Mobiflight Software
CS = Means CHIP SELECT .... Use the CS Pin you choose in Mobiflight,
SCK = Means CLOCK .... So its the line to CLK Pin on your Mega. ( Again the Pin you choose in MF)
GND = Is GROUND on Mega
VCC = Is 5V Power from Mega
Good Luck !
2018-06-12 08:25
icon