MobiFlight Community Support

Welcome to the forum for MobiFlight! Feel free to reach out to the community in case you have questions, issues or just want to share great ideas or details about your latest home cockpit project.

You like MobiFlight? Donate via PayPal and support the MobiFlight development. Thanks! 

icon
Avatar
herly
Posts: 67
Dear colleauges,

Recently I have a problem with arduino mega connected to mobiflight. I use 7 arduino mega and 1 of them has a problem. After update 7.5.0, there is a lost connection between arduino #2 with MF. I tried to repair it several times, but as soon as I insert with input on configured module, and the upload it. Then, again the module became blank or does not recognized. Previously there is no problem at all.

Here is the screen from the last 3 sentences of debug:

26/07/2018 8:17:25(878): MobiFlightCache.connect: Clearing modules
26/07/2018 8:17:25(846): ExecutionManager.autoConnectTimer_Tick(): AutoConnect Modules
26/07/2018 8:17:20(886): MobiFlightCache.connect: Clearing modules

Please anybody could assist me. Thank you.
2018-07-26 03:10
Avatar
pizman82
Moderator
From: ETSI, Germany
Posts: 3522
Supporter
Hi Herly

iconQuote:

I tried to repair it several times



What did you do ?

I´m sorry i not install 7.5 until now. So i can´t give you a solution. But think about that firmware is pretty new (For example the Encoder Stuff)
"Maby" there is a error when using a old setting on Mega that conclude with something new.

What i would do.....

Delete EEPROM with Arduino Sketch. ReUpload the Mfmc file.
If Problem still exist then check all Devices.... Maby delete all Encoders (on the problematic Mega) and create it new.
Good Luck !
2018-07-26 03:54
Avatar
herly
Posts: 67
Hi Pizman,

Thank you for your prompt reply.

Maybe the last is right: Delete EEPROM with Arduino Sketch. ReUpload the Mfmc file.
If Problem still exist then check all Devices.... Maby delete all Encoders (on the problematic Mega) and create it new.

I will try it by this weekend..

Herly
2018-07-26 04:34
Avatar
StephanHo
From: EDDG, Germany
Posts: 1525
Supporter
Hi Herly,

you can click into these three lines and you will be able to scroll in it with the cursor keys. Copy/paste is also possible. Only for your understanding ;)
Grüße,
Stephan
2018-07-26 09:56
icon