MobiFlight Community Support

Good day all.

I am at the end of programming my home cockpit and have recently started to make the MCP.
Am using Mobiflight 7.4.0.

So far there has been no problems for me to control thinsg using FSUIPC for buttons etc.
But now when I use the arduino mega 2560 board and have set up a display and try to get it to display the altitude, it only shows 00000.

Some say that I you need to edit some .ini file but which file? Found where?

Am totally confused here.

In the settings in Mobiflight some talk about setting these values;
Offset: 0x652E
Mask value with: FFFFx

But hey, what is this about, where is some tutorial for this?
Have spent the last four days trying to find something without luck. What am I missing here?

I think this is solved ( You wrote in other topic that you missed the INI DataBroadcast entry at beginning)

Please shortly confirm problem is solved !

Hello ,

what you need are basic knowledges of digital technology. These include the number systems of the binary numbers and the hexadecimal numbers as well as their logical linking possibilities. For this we have no tutorial here.
If there is an increased demand of several users, I would be happy to give you a little introduction.

Hello ,

what you need are basic knowledges of digital technology. These include the number systems of the binary numbers and the hexadecimal numbers as well as their logical linking possibilities.

Same Theory https://www.mobiflight.com/forum/message/8203.html
Hätte ich mir sparen können wenn ich diesen Topic und deine Antwort eher gesehen hätte.... Aber Connector kommt vor English in der Liste