MobiFlight Community Support

Hello .
I problem setting vertical speed for pmdg.
The problem is on display 7 segment the value is 1696.
I search in topic ma no solved.
Please is possible one tutorial o picture for setting step by step thanke.
I

Hi .

Please check this....... https://www.mobiflight.com/forum/message/4513.html
( This is the original guide in german and a little personal translate..... NOTE That was done with a older MF Version.... It workes until today... But now the MULTIPLY field is the Transform field.... Instructions like "multi 1" means no transform is needed..... "Multi 1000" means Transform $*1000 )

Or look here .... https://www.mobiflight.com/forum/message/5920.html
Thats a Google translation of the full text.... Also with some notes from me and Stephan .

I hope that solve your problem..... If not please reply HERE again !

Thank you for your answer but I believe that if you do not send me an email with the photo of the various fields to be filled I will never succeed. thank you again.

Hi Again.....

My Email is .... pizman@freenet.de

I have no screenshots from this and i pretty shure have no time to make a Step by Step Picture tutorial !
BUT i can help you if you realy not solve it youresellf ! Simply write me a request..... Reply will take some days maby.... the Waiting list is pretty long !

Finaly a suggestion to you !
It make no sense if i just give you a 100% Guide where you have to fill in what value..... Cause in next element like IAS/MACH Display you have the same problem and you need again a full tutorial to solve it.
May it sounds hard..... But you have to "learn" how this workes. Just copy other configs or using values i told you is NOT a solution for your basic Problem.

****
About the Situation itself....
PMDG got a Logic here... If VS Display is Active the value of offset 6530 is correct ( for example -2000 or +1300 and so on)
If Display is BLANK in Simulator the value change into "-16963" at all time.
So if you like that Your Real Display is BLANK at this moment you have to make a compare for example.....
You can say in compare tab " Always when Value is for example below -10000 ( No Real VS Rate can be so extrem low) THEN show Nothing on the Display.
Correct Compare is If Value < -10000 THEN Space Space Space Space Space ( Write 5 time Spacebar .... a Space is a BLANK for the Display Diggit)
Thats All.... Now if Display is blank it will now show Nothing instead of -1696 .

But again ..... YOU must check this youreself.... Otherwise you not be able to make a full cockpit. This are the basics you need to learn !