MobiFlight Community Support

Hallo Ihr,
ich bin gerade dabei mich mit Mobiflight anzufreunden und finde es sehr gut.
Ich selber nutze derzeit X-Plane 10.51. XUIPC als Konverter zwischen Xplane und Mobiflight ist zwar gewöhnungsbedürftig aber auch das erscheint machbar.
Jetzt zu meiner Frage:
Wie sieht es mit einer Unterstützung von X-Plane 11 aus?

Gruß Marc

XPUIPC sollte mit XPlane 11 kompatibel sein - ich habe es noch nicht ausprobiert.

Hat jemand damit Erfahrung?

i dont see xpuipc in your latest programm only fsuipc so how would xplane work with mobiflight?

You can download XPUIPC from here http://tosi-online.de/XPUIPC/Home.html
You install the plugin in X-Plane. Then it will be automatically connected.

yes indeed xpuipc will install into xplane but not in your programm there is no tab xpuipc so it wont connect to xplane

I think i understand youre problem....
I not use Xplane but i read the Manual of XPUIPC.

This tool work simular to FSUIPC for MS FSX. The guy who designed this programm use simply all the funtions from FSUIPC and did the same with Xplane.

So if you want to change a Value of a offset or read a Value for a display you can work with same offsetlist and technic like in FSX.
As Sebastian told... Mobiflight connect to XPUIPC automatically same way like to FSUIPC ( If Xplane and Xuipc is running)

If you want to create a config in Mobiflight just use "FSUIPC OFFSET" in the List..... Mobiflight sees no differnce between this programmes and send the commando then to Xplane instead of FSX.

Hope this is correct.... Just say what i read in manual of XPUIPC

it would be nice but if i run xplane and the mobiflight connector it wont connect to xpuipc because it looks for the status of fsuipc and not xpuipc therefor it wont and doesnot work either in xplane 10 or 11

it would be nice but if i run xplane and the mobiflight connector it wont connect to xpuipc because it looks for the status of fsuipc and not xpuipc therefor it wont and doesnot work either in xplane 10 or 11

hhhm. Sebastian told it should connect automatically.....

Without Xplane on my System i only can tell you what´s written in the Readme.txt....
So please check that you not only installed Xpuipc.... You need to edit a server adress in a config file.

Quote from XPUIPC Readme....

2. Edit the server address in the XPUIPC.ini file, located now in the XPUIPC folder, first. Put in the IP address of the PC where X-Plane/XPUIPC is running: (e.g. Server Address = 192.168.1.20)............
5. If it is loaded please go to the plugins menu on the right and check if there is a menu item XPUIPC. If it is there everything is fine.

So please confirm youre xpuipc is installed fully (with this Edit in Ini file) and run correct in Xplane.

yes i did and it is installed correctly and checked by running other addon programms such as VRinsight and TAsoftware gmap even ifms tablet app works but not your programm as i said i think mobiflight connect misses something in the connecting function it looks for fsuipc but cannot connect to xpuipc maybe it doesnot see the emlator for that is what xpuipc is the tab in your progoramm left bottom stays a yellow tiangle instead of turning green as it should when a connection is established.

seems like the problem is solved
i ran the wideclients at the same time so widefs and widexp and your program worked in xplane even after stopping widefs.
so something happened and i hope its to last but time will learn
so far so good

I actually tried XUIPC within MobiFlight, and it works.

However, as i didn't know how to integrate the Offsets/EventID's with X-Plane 11's functions, i couldnt do anything further.

I'm currently using a DIY board with P3D & PMDG 738 without any problem. I'd like to use this board with X-Plane 11's default 738 as well, but i need some assistance to integrate my buttons with the game.

Does anyone have some kind of a Input list just like PMDG's Offset / EventID list ?

I'm currently using a DIY board with P3D & PMDG 738 without any problem. I'd like to use this board with X-Plane 11 as well, but i need some assistance to integrate my buttons with the game.
Does anyone have some kind of a Input list just like PMDG's Offset / EventID list ?

??? the PMDG737 does not run in XPlane i think.

May i missunderstood you ?? What plane do you want to controll with youre DIY Board? If a standard Plane then use standard offsets....
The Standardoffsetlist for Xplane should be the same like the FSUIPC List... This can be find by google or on Pete Dawsons Supportpage!

Offsetlists for PMDG (Input Event Id´s) can be found in the pmdg/SDK subfolder (or by Google search in cockpitbuilder sites as a PDF file)

Good Luck !

I'm currently using a DIY board with P3D & PMDG 738 without any problem. I'd like to use this board with X-Plane 11 as well, but i need some assistance to integrate my buttons with the game.
Does anyone have some kind of a Input list just like PMDG's Offset / EventID list ?

??? the PMDG737 does not run in XPlane i think.

May i missunderstood you ?? What plane do you want to controll with youre DIY Board? If a standard Plane then use standard offsets....
The Standardoffsetlist for Xplane should be the same like the FSUIPC List... This can be find by google or on Pete Dawsons Supportpage!

Offsetlists for PMDG (Input Event Id´s) can be found in the pmdg/SDK subfolder (or by Google search in cockpitbuilder sites as a PDF file)

Good Luck !

Sorry, i didnt mention about that.

I meant using the default 738 of X-Plane 11

i wouldnot put too much effort into x-plane 11 as it is still in beta test.
i got the latest beta test update and now it wont start at all

My main goal is to capture the LED Output's and Input's of default 738 of X-Plane 11.

I've made this system for PMDG 738 but PMDG's offset values are probably different than X-Plane's defaul 738 because none of the switches & leds are working.

I've found the datarefs but i dont know how to integrate them with Mobiflight. I need some kind of Offset or EventID values to trigger them via MobiFlight.