MobiFlight Community Support

Welcome to the forum for MobiFlight! Feel free to reach out to the community in case you have questions, issues or just want to share great ideas or details about your latest home cockpit project.

You like MobiFlight? Donate via PayPal and support the MobiFlight development. Thanks! 

icon
Avatar
whiggy
Posts: 1
Hello people!

Today, I treid to use my Behringer X-Touch Mini with Mobiflight.
My values for rotary switches will only change in one direction, even if I set it correct for "left" and "right".

Please help.
2024-04-02 12:30
Avatar
XPRoberto
From: Hungary
Posts: 65
Hi,
As a 1st step:
Could you turn logging on (Info level), then check in Mobiflight (lower part of the program window) if both left and right events are recognised.
If not, then it could be a hardware configuration problem.
if yes, then check again your input config, since left and right are detected, but no proper action is called.
----------------------------------------------------------------
Do you know that you can simplify: if($=1,0,1) ?
Use simply: 1-$ :)
2024-04-03 09:38
Avatar
Kurby
Posts: 1
Hi,

same problem here. The logging says:

Info 04/11/2024 06:19:36 X-TOUCH MINI => Encoder 6 - Layer A => LEFT_FAST => executing "HDG"
Info 04/11/2024 06:19:38 X-TOUCH MINI => Encoder 6 - Layer A => LEFT_FAST => executing "HDG"
Info 04/11/2024 06:19:39 X-TOUCH MINI => Encoder 6 - Layer A => LEFT_FAST => executing "HDG"
Info 04/11/2024 06:19:40 X-TOUCH MINI => Encoder 6 - Layer A => LEFT_FAST => executing "HDG"

I turn the switch left and right, slow and fast. Always the same output.

Best regards,
Michael
2024-04-11 06:22
Avatar
XPRoberto
From: Hungary
Posts: 65
iconKurby:

Hi,
I turn the switch left and right, slow and fast. Always the same output.
Michael


Hi,
I don't have this specific hardware.
Since all inputs trigger the same event, I think it would be either a hardware issue or maybe the modul config is MF is not correct.
Maybe someone has Behringer X-Touch Mini and can help.
----------------------------------------------------------------
Do you know that you can simplify: if($=1,0,1) ?
Use simply: 1-$ :)
2024-04-11 08:59
icon