MobiFlight Community Support

Good morning, I am using Mobiflight to try to make an A320 Fenix cockpit, but I can't get the altitude to show on a display. I use the FXNX320_ACTUAL_ALTITUDE_DISPLAY variable that incorporates Mobiflight but it does not work, I have tried with several but nothing. Does anyone know what variable to use as output to display the altitude value. Thanks

I am Using FSUIPC Offset: 'fcuAltStr' 0x541B:8:s
with FenixQuartz ==googl== its work for me
gerating

Thank you very much for the answer, it gives me some hope, but in this subject I do not have much knowledge, could you give me more detail and if possible attach a screenshot to see how you have it configured, it would be of great help. Thank you very much again

Ok …. Download FenixQuartz from here
https://github.com/Fragtality/FenixQuartz its exe run it
on MB use this offset
Using FSUIPC Offset: 'fcuSpdStr' 0x5408:10:s
Using FSUIPC Offset: 'fcuHdgStr' 0x5412:9:s
Using FSUIPC Offset: 'fcuAltStr' 0x541B:8:s
Using FSUIPC Offset: 'fcuVsStr' 0x5423:10:s
Using FSUIPC Offset: 'isisStr' 0x542D:6:s
Using FSUIPC Offset: 'com1StandbyStr' 0x5433:8:s
Using FSUIPC Offset: 'xpdrStr' 0x543B:5:s
Using FSUIPC Offset: 'bat1Str' 0x5440:5:s
Using FSUIPC Offset: 'bat2Str' 0x5445:5:s
Using FSUIPC Offset: 'rudderStr' 0x544A:6:s
Using FSUIPC Offset: 'isVsActive' 0x5450:2:s
Using FSUIPC Offset: 'com1ActiveStr' 0x5452:8:s
Using FSUIPC Offset: 'com2StandbyStr' 0x545A:8:s
Using FSUIPC Offset: 'com2ActiveStr' 0x5462:8:s
Using FSUIPC Offset: 'clockChrStr' 0x546A:6:s
Using FSUIPC Offset: 'clockEtStr' 0x5470:6:s

Thank you. I have downloaded and installed it. Once installed I ran it together with Mobiflight and started the simulator. But I don't know how to configure it. The name of the offset fcuAltStr should appear in the Use preset? list, I've seen that it doesn't appear. In the parameters indicated in Base settings you have to indicate in Offset the value 0x541B? and in Value Type String?. The value of size must be set in More Options Substring 0 to 8?. I'm sorry but this is totally unknown to me. Thank you very much for your help.

I just tested it by restarting the simulator and it worked. Thank you very much for your help. Great