MobiFlight Community Support

Hi, I´m trying to program the buttons of the FMS on XPlane 11 but I can´t get it to work. MobiFlight detect the button when i press it but it does not execute the action. Someone has any idea of what I´m doing wrong or can give me the code that have used? Any comments will be welcome.
Regards.

If you confirm that the button work technical (Logging show Press and Release correctly) we know Hardware and device setting is fine.

Possible Issues.
1. MF is not in RUN Mode.
(Press Run button and check if it is running by observe the Running text lower right)

2. There is no Sim Connection
Click on Sim Status Dropdown (lower left) and confirm Xplane is detected

3. Your Config is not enabled.
Get sure the hook left of Config Lines are set. Only Active Configs get executed.

4. Wrong Settings in Config
Maybe your issue is just you select the wrong Dataref .
Specially AddOns often use own Dataref and not work with stock Events.

I can confirm you that the hardware works. Setting the debug mode in MobiFlight, and pressing a button of the FMC gives to lines of info, one with PRESS=>executing"FMC_A" when pressing letter A of the FMC, and RELEASES=>executing"FMC_A".
Modules and Sim status are both correct (with a green tick), and the active box checked. I also confirm that the config is up to date and uploaded in both Arduinos mega.
About DataRefs, I clicked inside the Sim in the specific DataRef of the FMC that writes inside of it, by clicking in activate on the DataRefTool, and I think they are correct selected.
Maybe I am wrong.
Thank you in advanced.

Here i recommend to join our Discord.
There we have Users ( E.g. Samhao) who work with Xplane all time and have experience e.g. with ZiboMod.

Just a Idea....
Some AddOns work parallel with Datarefs and Commands.
Means there is a Dataref that show status and specially it show the animation of the virtual Button.... But these are not used to do the Input.
Those use "Commands" Events instead.
Maybe your aircraft is one of those.

Additional Note.... You say Logging tell you a Press and a Release Command.
Is this correct ?
FMS are momenary Buttons. For Commands we not need releases mostly.