MobiFlight Community Support

On the garmin 3000, is it possible to have an events to zoom the map on the Longitude .
i searched on huphop and i didn't found .

Thanks in advance .

Excuse my english, i'm a French Canadian .

Hi CDOS,
Pas de probleme avec ton Anglais, my French is worse than your English. You speak the FlightSim and MobiFlight language and that’s all it takes here

As Microsoft has released AAU1, I want to use the new events for the Garmin 3000 and the Longitude too. With the help of Jaime Leone on Discord, I have started bringing the Avionics events from the Garmin 3000 to Hubhop, but haven’t looked into the zoom event(s) yet. I’ll try to do it this weekend.

Good luck,
Lex

Thanks Lex for your respond, i will see on Hubhop for your work .

Here on Québec, it is very cold (-31Celcius), a good time to do simflight inside

Hi Clement,
Ouch, -31 degrees Celcius... That's extremely rare in Western Europe... Indeed, you better visit some warm places, even if it is virtually .

I have added the following events to HubHop:
- AS3000_TSC_Vertical_1_Joystick_Range_Zoom_Inc
- AS3000_TSC_Vertical_1_Joystick_Range_Zoom_Dec

Both are intended to be used for the PFD. I verified if they work, and they work fine for me. I'll add the same events for Vertical_2, and later on for the Vertical_3 and Vertical_4 too.

Hope this helps.

Take care,
Lex

A big THANKS, i will try this afternoon .

HI Lex .

It's not good for me .
I put the events on my streamdeck, but it's don't work .

I made a short twitch for explain witch button i need : https://www.twitch.tv/videos/1729270968
Others button made by you work well .

Thanks for your help .

Hi Clement,

Sad to hear that it doesn't work yet for you and thanks for taking the time to record that video! I must admit that the first time I tried it myself, it also did not work. I used a rotary encoder connected to an Arduino Pro Micro. However, when I tried it the next day, without any changes, it worked! Also on Discord somebody mentioned that the preset works, not sure if he uses a Streamdeck...

I have a Streamdeck too, although I'm not using it for flight simming. I wasn't aware of that plug-in, but I'll try to give it a go in the coming days.

Thanks,
Lex

Hi Lex .

Thanks for your respond, i will see on Hubhob if you make the modification and i will try again .

Have a good day .

Clément .

Thanks Lex .

I found this events and it work very well .

AS3000_TSC_Vertical_2_Joystick_Range_Zoom_Dec# (>H:AS3000_TSC_Vertical_2_Joystick_DEC)
AS3000_TSC_Vertical_2_Joystick_Range_Zoom_Inc# (>H:AS3000_TSC_Vertical_2_Joystick_INC)

Have a nice flights .

Clément .

That’s great Clement!

Happy flights!