MobiFlight Community Support

Hello, with the new version of 9.6 , i saw in the video how to control lights on the bravo throttle.
When i do push on test button that i assigned parking brake light turn on , but when i enabled in the sim parking brake the light dont turn on.

Am i doing something wrong?

If the Test result in a lighted LED then you confirm electrical all is fine and you choose for the right LED Device on the Bravo.....

If it not work by the Information of Sim then this can have multiple reasons.

1. Check if MF is in RUN Mode.... Only then Sim Signals are received and transmittet to a LED.
2. Check if Config Line is active (Checkmark left of the Config)
3. Check if Config show a Error or a Disabled Warning (Red Explentation Symbol left of the Config line)

If those all is fine then check the Config Value ( 2 Collumns on the Right in Connector Window)
There you see what value is read from Sim and what value is send to the LED.

LED is OFF if Value is 0 .... and its ON if Value is 1 or greater.

If finally here is the Problem (e.g. Value remains 0 whatever brake is on or off) then you simply use the wrong Sim Event/Variable or Offset!

Thanks, i will take a look and let you know