MobiFlight Community Support

Hi Guys,

I‘m looking for some output variables of Fenix A320 in MSFS. My Hardware is properly working with the Fenix, but I‘m missing the outputs for the displays of the whole FCU (HDG, SPD, etc.). Does anybody has an idea of how to find them? Or is someone else already getting the values set for the FCU out of the Fenix to visualize it on a display/ LED?

Thanks for your help and response.

Carsten

I'm also having trouble finding the variable.

Did you already visit hubhop ?

https://hubhop.mobiflight.com/presets/

For example : FXNX320_ACTUAL_ALTITUDE_DISPLAY for current Altitude

ps.
Do FENIX allow popout panels ?

Hi Asessa,

the variable shown „FXNX320_ACTUAL_ALTITUDE_DISPLAY“ gives the current altitude of the aircraft „displayed“. I‘m looking for the AP/FCU values. I guess they are integrated in a compiled WASM Module, so that I can‘t find them.

Hi Asessa,

the variable shown „FXNX320_ACTUAL_ALTITUDE_DISPLAY“ gives the current altitude of the aircraft „displayed“. I‘m looking for the AP/FCU values. I guess they are integrated in a compiled WASM Module, so that I can‘t find them.

Maybe i didn't understand what do you want to do..

You have output and input lvar.
For Fenix, from hubhop portal, you have :

FNX320_FCU_ALTITUDE_KNOB_INC and FNX320_FCU_ALTITUDE_KNOB_DEC for input altitude
FXNX320_ACTUAL_ALTITUDE_DISPLAY for view on your display the current altitude.

So if you want to input a new alt you have to use FNX320_FCU_ALTITUDE_KNOB_INC and FNX320_FCU_ALTITUDE_KNOB_DEC , linked to your rotary encoder
For display selected altitude you can try A:AUTOPILOT ALTITUDE LOCK VAR:3, Feet

That‘s correct, setting a new altitude, HDG, SPD etc. is not a problem at all with those input lvars. What I want to do, is to read out the current altitude, SPD, HDG, V/S set in the AP/FCU. I‘m not interested in the current altitude, SPD, etc. of the aircraft, shown on the PFD. A:AUTOPILOT ALTITUDE LOCK VAR:3, Feet was properly working with A320 Neo and Flyby-wire A320 but not with Fenix.

That‘s correct, setting a new altitude, HDG, SPD etc. is not a problem at all with those input lvars. What I want to do, is to read out the current altitude, SPD, HDG, V/S set in the AP/FCU. I‘m not interested in the current altitude, SPD, etc. of the aircraft, shown on the PFD. A:AUTOPILOT ALTITUDE LOCK VAR:3, Feet was properly working with A320 Neo and Flyby-wire A320 but not with Fenix.

Ok. Maybe Fenix didn't release all LVAR at moment.

My doubt is exactly the same. Which variable do we put to present these Speed, HDG, Altitude and VS data indicated in the FCU?

FENIX is a very special situation in case there is (as far as i know) still a conflict with ProSim about Trademark Laws. So the HC Support is official permitted !

If you need help you should come to Discord.
There is a own section with a lot of FENIX Users.
And we already support hundrets of Preset Variables to the users.

Badly i can not help ( I not fly any Airbus in my life).
So join the group there, please !
https://discord.gg/99vHbK7