MobiFlight Community Support

Welcome to the forum for MobiFlight! Feel free to reach out to the community in case you have questions, issues or just want to share great ideas or details about your latest home cockpit project.

You like MobiFlight? Donate via PayPal and support the MobiFlight development. Thanks! 

icon
Avatar
StevenPilot62
Posts: 17
Hi hope someone will be able to help , i have connected the annunciators of the overhead fwd panels , and although they work fine when I test , they will not work when i run the program. i have fsuipc full version and status is good , modules are good. I have the offsets correct.

Thanks Steven
2022-06-02 10:02
Avatar
pizman82
Moderator
From: ETSI, Germany
Posts: 5501
Supporter
Hi

If LED work fine while TEST but not while RUN then we know electrical all is fine.

Two Possible Issues.

1. Wrong Settings.
E.g. No Active Checkmark in the Configs
Wrong LED selected

2. Wrong Offsets.
Are you sure the used Offsets are working for the used Aircraft ?

Solution:
Make a simple Test..... Use a Stock Aircraft of P3D (Mooney e.g.) and make a Output config for the Parking Brake.
If this work, you know all is fine and the issue must be Point 1 or 2
Good Luck !
2022-06-09 15:25
Avatar
StephanHo
Moderator
From: EDDG, Germany
Posts: 1819
Supporter
Problem has been solved via Discord.
Reason as the missing SDK entry to EnableDataBroadcast=1 after change the PC
Grüße,
Stephan (Time: UTC+1)
2022-06-09 22:33
icon