MobiFlight Community Support

Hi, For the completion of my home simulator, I need 420 000 rubles. (( the amount is not small. Therefore , after thinking for a long time , I decided to go the way of Barter : Detail - Money

I have the opportunity to make parts for the Airbus A320-321 and Boeing 737 simulator, so my suggestion is

I will sell panels without stuffing (electronics) for the above-mentioned aircraft at a price from 40 to 100 EUR . The price depends on the amount of engraving and the area of painting, as well as on the size of the part itself.

The parts consist of two parts, the first is 5mm acrylic plastic transparent, covered with primer and paint also engraved. The second part is a 3 mm acrylic plastic transparent. All the holes are cut.

For the complete set, if necessary, I can invest electronics, but this is considered separately, since everything is purchased in the store.

Well, for support, I can help with the setup.

PS: I can also make twists and tips for toggle switches of the same types of aircraft, printing on a 3D printer.

All work and deadlines are stipulated in the bos ) Before sending, I will make a video report of the part itself and a photo to close the issue of the quality of manufacture, if a rework is required.

Write to the BOS or here, all prices are indicated with the calculation of work on the laser machine and my small commission for the completion of the simulator.

I am from Russia, delivery is possible by EMS and SDEC

Hi
About MF Rules.
Normaly we not allow commercial Vendors to make "advertising" on our Sides.
But may you like to contact the "boss" ( Sebastian a.k.a. DocMoebius ) himself ( best way via Discord) . May he is interested in a official cooparting or allow you to link your shop.

About your Idea.

The parts consist of two parts, the first is 5mm acrylic plastic transparent, covered with primer and paint also engraved. The second part is a 3 mm acrylic plastic transparent. All the holes are cut.

Just a hint....
The inner parts ( Whatever the second layer behind the Panel where we mount e.g. switches and Displays.... Or also maybe needed additional Layers in the middle of the panel need to be transperent 100% ( to allow Backlight shining through without problems )
BUT
For the FIRST Layer (Painted and engraved Front) i highly recommend "Milky Acrylic" instead of full Transparent..... maybe with a shine through value of 60-80%

With a full transparent, the engraved Text is not vissible at Daytime when no Backlight is ON..: Cause its fully BLACK ( without light behind)
If you use Milky Glas instead the Text looks "White", also if no Light is On.