MobiFlight Community Support

Hello

After fight with A320 FLYBYWIRE&MB with the VSP, I get that I can´t use the same MB SW for all the airplanes. I´ve to use one MB SW for the A320 FBW and other for the other airplanes. I was trying to use the same for all, but it´s impossible.

Now I´m happy, for a moment... MSFS2020 it´s a surprise each update.

Best regards,

????

What you like to do ???

the basic Idea from MF is to use a Config File (*.mcc) for a situation...... So if you like to controll 5 different Aircrafts, you would use 5 different MCC Files.....


Lets say FBW Airbus need a special Event to controll the Autopilot Altitude Encoder.....
A Other Aircraft like Stock Cessna 172 use a DIFFERENT Event to cotroll its own Autopilot Altitude selector.....

So its logical.... You can not build ONE global Mobiflight Config, cause how should MF know what Aircraft is in use and what action you like to execute at the moment.

Solution:

Build multiple MCC Files.....
Some of the Config will be identlical..... E.g. Gear UP/DOWN is pretty sure the same Event for 99% of Aircrafts.
Others are different.
So Create a MCC File realted to the used aircraft! If you like to fly the A320 then load the needed MCC File in MF.
If you switch to a Cessna then also Load this time the "Cessna.mcc" file in MF and all is fine !

Yes. That´s that I did: several MCC. One for A320, other for the rest, but. Do you know that with the new G1000 of MSFS2020 it´s different the values that received?. For instance: I´ve AS1000_PFD_SOFTKEYS_6 for change from NAV to GPS, but with the new G1000 it doesn´t works. ???.I do not know what can I do now, because I can find any mobiflight-event-module. With MSFS2020 you must learnig each day.

Thank you.

I not use the Garmin myself...... May other USers (DISCORD) can help better here.

But Logic is the same like in the question above.....
If the currently used Event is working in one system BUT no longer work in the G1000 now THEN this simply means the G1000 use another Event !
If a User still included it into the HubHop List ( Ask RofLer on Discord) then it is there.
If NOT then you must do it ( or wait until a other user do it for you).
Check the Tutorial Video on our Youtube Channel.
Open The FS2020 in Developer Mode to find out all available Events in your used Aircraft ( Including the Garmin stuff) and simply build these Input Configs by Hand ( instead of choose a Preset) OR Create the Data in HubHop to make it into a PReset for others ( and yourself) in the future !

Thanks, my friend. I´ll try it and I´ll tell you the results. Bye.