MobiFlight Community Support

im using mobiflight 8.2.0 and ProSim 2.31 (all latest versions, but i tried Mobi 7.8 and 7.9 also...same result) ,
Prosim has connection with FSUIPC and secondary SimConnect flight Sim X
When i connect a 7 segments display all is wel, when i run test in Mobiflight i got the digits i want, so the connection is OK.
But at the botom i get errors ->SimConnectCache::Exception NAME_UNRECOGNIZED
when i want to test it in Prosim and i change the numbers.....i got nothing
(i programmed Prosim and Mobiflight correctly same offset and i use the correct parameters)

in Mobiflight the modules are green , FSUIPC is green and SimConnect (MFS2020) is green, bu like i said..i dont use MS2020...i use FSX (for now)

can somebody help me?? im stuck !!!!

thenks in advance
Theo

Sorry for late Reply.

Is this still actual ?

Yes this is till actual

Could you make a Test without ProSim ?

I not know this Error message. Sounds maybe like a bad Config.

What i would do....

Start FSX and use a Standard Aircraft ( Like C172 )
Start Mobiflight and open for testing a NEW File (*.mcc)
Create just ONE Output Line.....
Use the Display as Device.
And use as Offset e.g. the Preset for COM1 Active Frequency.
Press RUN

If this also NOT work we have a basic problem and need to check. BUT if this work fine then....
Start now the ProSim
BUT Not use the Logic like in the past.... Just read in ProSim a verry easy thing like the MCP Altitude or so.
And also in MF only use one Config line in a new file.

In easy words.... Make a clean testing.... Find out if Problem is basicaly always, or maybe only if you use ProSim.
Maybe the MCC File is just buggy.... And the same Config in a new file work fine.
Please try to "split" the issue spots and test individually ...... Then you will see pretty sure where the problem is located.
Finally tell me the result. So we can see how to help you.