MobiFlight Community Support

Welcome to the forum for MobiFlight! Feel free to reach out to the community in case you have questions, issues or just want to share great ideas or details about your latest home cockpit project.

You like MobiFlight? Donate via PayPal and support the MobiFlight development. Thanks! 

icon
Avatar
Doon1
Posts: 53
127 inputs. 138 available with a pair of mega2560 boards and Mobiflight. About to run it through Lightburn and F360 to make the faceplate.
Am I missing anything? I do have flaps on my joystick.
2021-02-25 00:12
Avatar
Doon1
Posts: 53
After lasing and routing the faceplate I realized that it was a little busy for a VR setup. So I paired it down to the buttons and dials I actually touch in-game. It turned out well and made VR flight so much more enjoyable.
Mobiflight made this possible. THANKS!



2021-06-30 03:12
Avatar
pizman82
Moderator
From: ETSI, Germany
Posts: 6010
Supporter
Nice Work !

Looks like i miss to reply some months ago.....

iconDoon1:

127 inputs. 138 available with a pair of mega2560 boards and Mobiflight.



Pin 0-53 and A0-A15 = 54 + 16 = 70 Pins .... MINUS Pin 0 and Pin 1 (Both INOP) is 68 Pins in total.
68*2 = 136 !

So your lucky that your calculation only use 127 Pins..... In case your expected Maximum was 2 Pins over the limitation!
Good Luck !
2021-07-02 14:15
Avatar
Doon1
Posts: 53
That would have sucked... :cry:
Now that I've been flying it for a few days I realize that I want more buttons. I may have to build the original design; with even more buttons added to it. :w00t: Pretty much everything in the 172 should do it.
2021-07-04 20:30
icon