MobiFlight Community Support

Welcome to the forum for MobiFlight! Feel free to reach out to the community in case you have questions, issues or just want to share great ideas or details about your latest home cockpit project.

You like MobiFlight? Donate via PayPal and support the MobiFlight development. Thanks!

05/03/2024 - This forum is read-only

The community support for MobiFlight has moved exclusively over to our Discord server. Register for free and enjoy more interactive functions like image and video upload, voice chat. More than 7,000 registered users around the world make it a great experience!

See you on our MobiFlight Community Discord server.

A HUGE Thank You to everyone who participated in the forum, especially obviously to Pizman and Stephan who did an outstanding job over so many years providing an incredible service to the MobiFlight community.

The forum is still providing a lot of good content, hence we keep this information accessible.

Message #22519

FraSieSim

Posts: 4

Hello,
This is on the actual MSFS2020 and the FlyByWire A32NX mod (experimental version)
I refer to Mobiflight 8.0.2
(I have a Behringer X-Touch mini to control my MSFS.)
I find the mobiflight very useful with the new features in the mobiflight-event-module in combination with FSUIPC.

My problem: I wanted to control the (communication-)radio in the A32NX with an encoder.
First I tried events like COM1_RADIO_WHOLE_INC, but that did not work in A32NX.

In the latest events.txt I found the events:
A320_Neo_FDW_BTN_L_TRANSFER#(>H:A320_Neo_FDW_BTN_L_TRANSFER)
A320_Neo_FDW_DIAL_L_INTEGER_INC#(>H:A320_Neo_FDW_DIAL_L_INTEGER_INC)
A320_Neo_FDW_DIAL_L_INTEGER_DEC#(>H:A320_Neo_FDW_DIAL_L_INTEGER_DEC)
A320_Neo_FDW_DIAL_L_DECIMAL_INC#(>H:A320_Neo_FDW_DIAL_L_DECIMAL_INC)
A320_Neo_FDW_DIAL_L_DECIMAL_DEC#(>H:A320_Neo_FDW_DIAL_L_DECIMAL_DEC)
A320_Neo_FDW_SWITCH_L_TOGGLE#(>H:A320_Neo_FDW_SWITCH_L_TOGGLE)[/i]

That looked very interesting, I tried, but it did not work for A32NX.

Then found values for the A32NX (How I found them I will describe in a following post):

A32NX_RMP_L_TOGGLE_SWITCH#(>H:A32NX_RMP_L_TOGGLE_SWITCH)
A32NX_RMP_L_OUTER_KNOB_TURNED_CLOCKWISE#(>H:A32NX_RMP_L_OUTER_KNOB_TURNED_CLOCKWISE)
A32NX_RMP_L_OUTER_KNOB_TURNED_ANTICLOCKWISE#(>H:A32NX_RMP_L_OUTER_KNOB_TURNED_ANTICLOCKWISE)
A32NX_RMP_L_INNER_KNOB_TURNED_CLOCKWISE#(>H:A32NX_RMP_L_INNER_KNOB_TURNED_CLOCKWISE)
A32NX_RMP_L_INNER_KNOB_TURNED_ANTICLOCKWISE#(>H:A32NX_RMP_L_INNER_KNOB_TURNED_ANTICLOCKWISE)
A32NX_RMP_L_TRANSFER_BUTTON_PRESSED#(>H:A32NX_RMP_L_TRANSFER_BUTTON_PRESSED)

And with these events (which I added to my events.user.txt) it worked!

I hope, this is helpful for others too.

Thanks for this great tools, regards, Frank

2021-03-08 16:55

Message #22668

TommyTomTom

Posts: 5

Are you showing the frequencies on 7-Segment-Tubes?
If yes, how you get the last digit working?
I'm using a double encoder with inner and outer knob to dial the frequencies in, it's working perfectly but not the 7-Segment Tube.
If I dial in e.g. 123.015 the 7-Segment Tube is showing 123.010.
Always the last digit is missing.
Any solutions?

Tahnks in advance....

2021-03-25 22:22