MobiFlight Community Support

Hi
I am flying the FS2020 A320
I did the first tutorial and the LED at my Arduino Mega 2560 is working.
The FSUIPC7 is connected
The Web Sockets Server is running and connected to the FS2020
But the Parking Break in the FS2020 is not responding.
Do I need a purchased key for the FSUIPC7 to get it working?
Thank you for helping me, Gerhard

Hi

1. For Mobiflight usage there is no key needed for FSUIPC. You can also use the "freeware" Non-Reg Version. Technical it´s the same. The Payware just get some additional features (we not use or handle with Mobiflight)..... So from our Point of view..... MF not know what FSUIPC is installed and not care about.

2. I don´t know what is a "The Web Sockets Server" Please explane more detailed.

3. You say "I did the first tutorial and the LED at my Arduino Mega 2560 is working."
Do you mean you just confirm the electrical Status.... So LED light if you press TEST in the Display Tab of that config ?
OR
Do you mean the LED act to the virtual Parking Brake situation.... So you confirm you got a sim connection and the "output" is already fine ?

4. What is the exact Problem ? You say.... "!But the Parking Break in the FS2020 is not responding."
So the Problem is only the INPUT ?? Or related to question 2..... Is your problem fully a missing connection to the Sim ?



*****************
Basicly.... As you maybe read already.... FS2020 is not fully working. Its like a Beta whatever they still released it. And FSUIPC7 is also not a fully working Programm and official still in BETA !
Mobiflight technicla is FS2020 Ready. We have done "our" part of the work. But Pete Dowson and also Microsoft have missed to finish there work till now !

So lots of "bugs" reported by the users at the moment are related NOT to Mobiflight. It occure by issues in the Sim or FSUIPC.
But sure... Maybe also your config is simply wrong and the sim work fine. I would need to see your config to awnser this.

LAST NOTE: Not trust in Presets ! Those are for FSX/P3D . FSUIPC7 and FS2020 can use different adresses and Offsets.
So if you build a Config.... Please verrify the Data with the newest FSUIPC Offset lists that is included in your FSUIPC Installation ( XLS file as i know) .
THERE you see if a Offset is still working (green mark) ..... Untested (Yellow) or Not already impliment ( Red)

Thank you, now it works when I start simconnect at the PC