MobiFlight Community Support

Hello,

it worked for weeks perfect but all of a sudden very strange problems.

It all started with a W10 error when starting MF, see my previous post on this forum. (https://www.mobiflight.com/forum/topic/6104.html)

Did a lot of thing and I could get MF beack started but also more strange behaviour came in and it's not working at all anymore although MF says all is ok.....

1st: when starting MF it says: Module found but MF not installed, do you want the firmware to install.
This is rather strange because the firmware was already there but ok, let's install firmware and this works well.

MF starts, all looks ok, module green, connection to sim ok but nothing is working.

When I want to look at the hardware setup I get this error:


After restarting MF and try again this error did disappear (but nothing is working although status all green) but now I see this:


There is a module but I can not select it to see if there is any hardware connected but also I can not add any hardware devices, it is just info but can not enter.

What I did do is : did upload new firmware everytime MF asks at startup, although all looks fine (double green) nothing works, I did delete the total MF dir on the SSD and performed a new install.

Although it was a new install MF did recognize my settings as you can see in th e MF menu (like parking brake etc) so -somewhere- there most be more data.

May-be this other data is corrupt??

Thanks for your help!

I see the same error at an other user:
https://www.mobiflight.com/forum/topic/5621.html

So...I do think it is MF/firmware related... (better in that part of the forum but ok...)

I also cleared the EEPROM with external Arduino sketch and uploaded MF again but no luck, problem still exists.

Very strange it did work before....was there an update on MF?? Any suggestions?

Thanks