MobiFlight Community Support

Welcome to the forum for MobiFlight! Feel free to reach out to the community in case you have questions, issues or just want to share great ideas or details about your latest home cockpit project.

You like MobiFlight? Donate via PayPal and support the MobiFlight development. Thanks!

05/03/2024 - This forum is read-only

The community support for MobiFlight has moved exclusively over to our Discord server. Register for free and enjoy more interactive functions like image and video upload, voice chat. More than 7,000 registered users around the world make it a great experience!

See you on our MobiFlight Community Discord server.

A HUGE Thank You to everyone who participated in the forum, especially obviously to Pizman and Stephan who did an outstanding job over so many years providing an incredible service to the MobiFlight community.

The forum is still providing a lot of good content, hence we keep this information accessible.

Message #19217

waviateur

Posts: 1

Hi, I am new to this forum, so maybe my problem is already solves in another thread.

I had a setup working with rotary encoders with solder pins.
I changed the encoders for encoder on a board with 5 pin connector.
But when I connect them the instrument on the aircraft will only rotate when I turn to the left, when I turn the encoder to the right nothing happens.
I use cheap encoders but I have the same problem with expensive Velleman encoders.

When I use the older encoders everything works normal.

2020-07-11 16:19

Message #19218

RudyB

Posts: 38

Some possible causes that I can think of (there may be others):
- a wiring issue
- the encoder is broken (less probably because you have the same issue with Velleman, but still ...)
- the encoder type in the hardware setup menu > extra's > settings needs to be changed. There are 5 types to choose from.

Always have fun!

2020-07-11 20:35

Message #19219

pizman82

Moderator

From: ETSI, Germany

Posts: 6010

Supporter

Hi

Not every encoder is compatible with Mobiflight..... specialy the 5 Pin ones "can" be problematic. E.g. the KY40 will work.

NOTE: The 5 Pin Encoders need also the Additonal 5v and GRD from the same arduino Board you use for the Data Pins.

Good Luck !

2020-07-11 21:54