MobiFlight Community Support

Welcome to the forum for MobiFlight! Feel free to reach out to the community in case you have questions, issues or just want to share great ideas or details about your latest home cockpit project.

You like MobiFlight? Donate via PayPal and support the MobiFlight development. Thanks! 

icon
Avatar
mike1275
Posts: 5
Hi All,

I am currently experimenting with configuring Mobiflight to run a real Hawker Siddeley Trident 3B flight engineers panel. With using real gauges PWM is useful are there any plans to include PWM functionality? So far I have the basics running such as dolls eyes, annunciators and switching but the instruments are next :-)

Cheers,

Mike
2020-07-05 22:05
Avatar
pizman82
Moderator
From: ETSI, Germany
Posts: 3517
Supporter
Hi

Do you still test the Output Typ " Servo Motor" for this?
Good Luck !
2020-07-06 02:31
Avatar
mike1275
Posts: 5
Hi,

I did try the servo tutorial but even with a basic LED setup to rule out my PWM mosfets the output never seems to zero out so the result is a very small range of change. For my test I'm using a genuine Arduino with an LED and 220 ohm resistor, the same setup works well with the Arduino LED dimmer sketch so I'm not sure whats happening.

Thanks,

Mike
2020-07-06 22:23
icon