MobiFlight Community Support

Welcome to the forum for MobiFlight! Feel free to reach out to the community in case you have questions, issues or just want to share great ideas or details about your latest home cockpit project.

You like MobiFlight? Donate via PayPal and support the MobiFlight development. Thanks! 

icon
Avatar
Jeroen737
Posts: 3
Hello friends,

I succesfully configured my displays on my home-made MCP to be used with the Zibo737.
They are all working fine.

But the issue I have is when my aircraft is loaded with no engines running all my display are displaying info.
But the MCP of the Zibo737 are all dark and not displaying anything.
I also want my displays on my MCP to have the same state, meaning off.
Anybody have an idea how to get this fixed or programmed?

Greetings,
Jeroen
2020-02-19 20:31
Avatar
VR-FlightSim
From: United Kingdom
Posts: 97
Supporter
This topic has been discussed two hundred and fifty times already. Just search the forum buddy;)
2020-02-20 08:25
Avatar
manu3l
Posts: 4
search for the retrigger switch in mobiflight.


but you did your mcp for the zibo mod, can you publish the offset values ​​for everything here?
would be very grateful to you! especially for the outputs


Manuel
2020-02-24 23:03
Avatar
pizman82
Moderator
From: ETSI, Germany
Posts: 3522
Supporter
Retrigger is different i think....

What he need is a simple "Battery OFF" Logic.....

This can be Done with Precondition System and multiple Configs for each Diplay/LED Output ..... OR By Using Placeholders and formulas.
What you need is something like " IF Battery Switch is ON .... THEN show current Value on Display..... IF NOT (ELSE) Show Spaces (Blanks) on that Display.

As VR-FlightSim said.... Please use Search.... maby Keywords "Battery" or "Lighttest" to find a lot of Topics with that logics.
Good Luck !
2020-02-26 03:06
Avatar
Jeroen737
Posts: 3
Hello, as requested my config so far.
I Have all display and LED's working.
At the moment I am struggling with inputs, Mobiflight registers my switch position changed, but nothing is going through XPUIPC offsets to the SIM.

#MCP Course CA
Dataref COPILOT laminar/B738/autopilot/course_pilot int
Offset 0x6500 UINT16 1 rw $COPILOT

#MCP Heading Display
Dataref MCPHEADING laminar/B738/autopilot/mcp_hdg_dial int
Offset 0x6503 UINT16 1 rw $MCPHEADING

#MCP Course FO
Dataref COFO laminar/B738/autopilot/course_copilot int
Offset 0x6505 UINT16 1 rw $COFO

#MCP SPD
Dataref SPD laminar/B738/autopilot/mcp_speed_dial_kts int
Offset 0x6507 UINT16 1 rw $SPD

#MCP ALT
Dataref MCPALT laminar/B738/autopilot/mcp_alt_dial int
Offset 0x651B UINT16 1 rw $MCPALT

#MCP VVI
Dataref MCPVVI laminar/B738/autopilot/ap_vvi_pos int
Offset 0x651D UINT16 1 rw $MCPVVI

#MCP A/T ARM Led
Dataref ATARM laminar/B738/autopilot/autothrottle_status int
Offset 0x650A UINT8 1 rw $ATARM

#MCP FD CA Led
Dataref FDCA laminar/B738/autopilot/master_capt_status int
Offset 0x650B UINT8 1 rw $FDCA

#MCP CWS A Led
Dataref CWSA laminar/B738/autopilot/cws_a_status int
Offset 0x650C UINT8 1 rw $CWSA

#MCP ALT HOLD Led
Dataref ALTHOLDLED laminar/B738/autopilot/alt_hld_status int
Offset 0x650D UINT8 1 rw $ALTHOLDLED

#MCP FD FO Led
Dataref FDFOLED laminar/B738/autopilot/master_fo_status int
Offset 0x650E UINT8 1 rw $FDFOLED

#MCP HDD SELLed
Dataref HDGSELLED laminar/B738/autopilot/hdg_sel_status int
Offset 0x650F UINT8 1 rw $HDGSELLED

#MCP VS SPEED LED
Dataref VSSPEEDLED laminar/B738/autopilot/vs_status int
Offset 0x6510 UINT8 1 rw $VSSPEEDLED

#MCP SPEED LED
Dataref SPEEDLED laminar/B738/autopilot/speed_status1 int
Offset 0x6511 UINT8 1 rw $SPEEDLED

#MCP CMD A LED
Dataref CMDALED laminar/B738/autopilot/cmd_a_status int
Offset 0x6512 UINT8 1 rw $CMDALED

#MCP CMD B LED
Dataref CMDBLED laminar/B738/autopilot/cmd_b_status int
Offset 0x6513 UINT8 1 rw $CMDBLED

#MCP APP LED
Dataref APPLED laminar/B738/autopilot/app_status int
Offset 0x6514 UINT8 1 rw $APPLED

#MCP CWS B Led
Dataref CWSB laminar/B738/autopilot/cws_b_status int
Offset 0x6515 UINT8 1 rw $CWSB

#MCP LEVEL CHANGE Led
Dataref LEVELCHGLED laminar/B738/autopilot/lvl_chg_status int
Offset 0x6516 UINT8 1 rw $LEVELCHGLED

#MCP LNAV Led
Dataref LNAVLED laminar/B738/autopilot/lnav_status int
Offset 0x6517 UINT8 1 rw $LNAVLED

#MCP VOR LOC LED Led
Dataref VORLOCLED laminar/B738/autopilot/vorloc_status int
Offset 0x6518 UINT8 1 rw $VORLOCLED

#MCP VNAV Led
Dataref VNAVLED laminar/B738/autopilot/vnav_status1 int
Offset 0x6519 UINT8 1 rw $VNAVLED

#MCP N1 Led
Dataref N1LED laminar/B738/autopilot/n1_status int
Offset 0x651A UINT8 1 rw $N1LED
2020-03-04 20:12
icon