MobiFlight Community Support

Welcome to the forum for MobiFlight! Feel free to reach out to the community in case you have questions, issues or just want to share great ideas or details about your latest home cockpit project.

You like MobiFlight? Donate via PayPal and support the MobiFlight development. Thanks! 

icon
Avatar
albeagle
From: Kosovo
Posts: 118
Hi there everyone.

I have designed a Boeing 737 MCP and wanted to share the gerber files. I haven't built the MCP myself but it should be very easy to assemble. There is also a Parts List.




https://flyingforfun.weebly.com/boeing-737-cockpit.html

Enjoy
Regards
AlbEagle

http://flyingforfun.weebly.com/cessna-172-cockpit.html
2019-02-24 20:24
Avatar
thatchi
Posts: 126
Thanks. U are the man.
2019-02-24 21:24
Avatar
albeagle
From: Kosovo
Posts: 118
iconthatchi:

Thanks. U are the man.



:thumbup:
Regards
AlbEagle

http://flyingforfun.weebly.com/cessna-172-cockpit.html
2019-02-24 23:07
Avatar
pizman82
Moderator
From: ETSI, Germany
Posts: 2773
Supporter
Nice work.... Just a recommendation.

If you still get the expensive way and create a PCB then i would think about a 1 diggit Logic for the Displays.

Finding a 3, 4 ( Speed have 4/5 Diggits normaly) and 5 Diggit Displays in Same Color and Size is verry Difficult.
BUT
You will get 1 Diggit Displays in standard Common Cathode Setup and Size in all possible colors.

So for those PCB i would use a internal line System and work with 10 Pin Headers for Single Diggits.


Same System like this : https://www.opencockpits.com/catalog/holder-displays-pi-65.html?image=0
Good Luck !
2019-02-26 09:26
Avatar
albeagle
From: Kosovo
Posts: 118
Once I have a little time I will check that option. There are a lot more connections needed but it may be more convinient. If it's possible then I will do something. :)
Regards
AlbEagle

http://flyingforfun.weebly.com/cessna-172-cockpit.html
2019-03-05 16:57
Avatar
technik
Posts: 1
Hi albeagle,
Thank you for your time and efforts.
Is this PCB compatible with the Opencockpits 737 MCP? Also is it possible to have the schematic or at least the connectors wiring diagram?
2019-11-29 12:56
icon