MobiFlight Community Support

hi all,
can mobiflight running by second pc. using lan cable.

Yes and No.

Mobiflight needs to talk to FSUIPC.

So Mobiflight itself have NO Network support like a Master/Slave or Server/Client system.

BUT

FSUIPC have this support if you Buy a Registred Version and also a Reg Version from the WIDE FS Tool.
In that case the FSUIPC is avalable via Network on Multiple PC´s
And Mobiflight can talk to the FSUIPC Client in same way like it is on the SIM-Computer


Check Pete Dowson Page.... http://www.schiratti.com/dowson.html and the SimMarket Links to the vendor !

i already to run mobiflight on second pc. great funtion for input. every button and encoder swith function. but output segment display ,led. can,'t function


#prepare3d v4
#pmdg b737

There should be no problem with outputs either.
As long as you have a FSUIPC connection successfully established, reading and writing offsets will work.

Do we talk about PMDG ??

fsuipc looking ok.
wide fs i test glass fd on second pc also connected.
this vedio i try running one pc also. error
https://youtu.be/R-iYfj98hpc

for your infomation.i migrate from fsx to p3dv4 plus pro. in fsx running good perfect. this link running on fsx

https://youtu.be/5qBCdDJ3rfE
ttps://youtu.be/1uO6D6sHQBs

please help me. for solution

pizzman.
we talk pmdg b737

Hiho again

we talk pmdg b737

A already supposed

In PMDG the INPUTS are done via EventID ( That is included in basic FSUIPC setup) but OUTPUTS are just a reserved Area in FSUIPC and the data must be "sent" by PMDG itself.
YOU have to eneable this Data Broadcast by a Entry in PMDG "INI" File.
(All is explaned in the PMDG Manual ! )

To enable the data communication output from the PMDG aircraft, you will need to open the file
737NGX_Options.ini (located in the FSX folder PMDG\PMDG 737 NGX, and add the following lines
to the end of the file:
[SDK]
EnableDataBroadcast=1

Pretty sure this is the problem !


Note: Another issues are ...
- Not Up to Date FSUIPC Version ( get always the newest Version from this spot http://www.schiratti.com/dowson.html )
- Installation of PMDG in a Windows secured Folder like /programmes(x86) In That case open the Editor you write the INI File with Admin permission !

pizman,
ivent id ( input) perfect work.
only output like led segment display servo no funtion. offset value O fsuipc O.
enablebroadcast=1 i write in PMDG ini file.

but p3d i install in location D not install /program (x86)

so what can i do
a) uninstall p3d
c) just remove to /program(x86)

another one i not install fsuipc sdk.

hi pizman,
i am happy now. my mobiflight perfectly working.
output and input.led segment rotary encorder function.

after i update p3dv 4 to version one.work great.
now i am running 2 pc network wide client fsuipc
problem solved
tq

Not remove to secure folder.... Its high recommend to install all flightsim stuff in a own HD Partition like "D:/"

Please again check the INI file... Was the save succesfull ? Do you use correct syntax.... Use correct brackets.... Use Big/Small Charackters 1:1

[SDK]
EnableDataBroadcast=1

If not work check your FSUIPC Version ( Use up to date version)
Also Check PMDG Servicepack ( Not know the P3D Version.... In FSX the newest is 1d (DELTA)
Finaly check your Offset. Is it correct ? Check for testing another offset from the PMDG List ( For example a Simple Anounciator LED from the Overhead ! )

successful tq

successful tq

Nice to hear...
But please tell us what was the nature of problem.....

May your mistake can help to prevent problems for other users. So please tell us !

the problem is version prepare3dv4.0. not detect full function mobiflight.
after i update version p3dv4.1 the problem solved
now i am happy.
tq