MobiFlight Community Support

i have half way configure mobiflight like thorttle mcp efis and hafl mip panel.
if used xplane. can i use mobi mcc file to xplane.
or any suggestion.

Hi fazli,

no, that won't work because pmdg uses Fsuipc and xplane needs Xpuipc. Further I think that the Event-IDs and the Offsets are other.

What you can do is to use one mcc file for the PMDG and one mcc file configured for xplane. Note that the MEGA pins then should be the same in both files.

so, i must be configure new one for the xplane 11

how to. any tutorial?
i worry any congfigure burn.

so, i must be configure new one for the xplane 11

how to. any tutorial?
i worry any congfigure burn.

I not understand your question....

Your hardware is identical.... For example the Display in MCP that show Altitude is set to your MEGA "xy" AND IS SET ON Pin 7,8,9 . On This Mega there is a device for that !

Basicly you can use now this Mega ( And the used hardware) with every Mobiflight Config (mcc file) you like.

For PMDG for example you create a Output that read Offset XYZ and show the Value on The Display.
For your Xplane AddOn you also must find out WHAT Offset is used for the MCP altitude.... and you simply Read out This offset now.

Note 2 Things:

1. I will recommend to build the new config completly by hand.... So you can get sure no old issue is "duplicated" and you get a clear system.... But Basicly you can simply use "SAVE AS" and create your file a second time with a new name....
Then you simply rework every singel config line to the new system. With that technic you may save a lot of time.... But get sure you know what you do.

2. Check your XPlane Aircraft before you start. Mobiflight talkes to Xplane via XPUIPC. This is NOT a 1:1 Full working FSUIPC Clone.... There are NOT 100% of functions supported.... Specialy AddOn Aircraft are mostly NOT supported at all.
So find out if all functions can be done.... And already think about a own script to include your Xplane AddOn Aircraft by hand in the XPUIPC Software !