MobiFlight Community Support

Welcome to the forum for MobiFlight! Feel free to reach out to the community in case you have questions, issues or just want to share great ideas or details about your latest home cockpit project.

You like MobiFlight? Donate via PayPal and support the MobiFlight development. Thanks! 

Posts: 11
Hi, I would like to introduce my project Boeing 737
The aim of my project is not just the domestic cockpit, but also the creation of tutorial for those who are confused just like me.:blink: B)
Something I caught on the forum, I still have to ask for a lot. I use Arduino mega and P3D. I have mastered the basic tutorials. I am aware of Events ( and offset mapping ( But I had to ask a friend for an explanation, as I'm a little confused from these documents.
Thank you/Vielen Dank
EDIT - Message for pizman82 :)
Hi, Maybe it's a broken search. I try find information about wiring and setting of the APU switch for 737.
And hop-on message "The search returned no matches", but the topic exists:
[Last edited by JendaBenda, 2018-06-01 10:55]
2018-05-25 12:32
From: ETSI, Germany
Posts: 5566

I know that and i talked to Sebastian already....

Just note that Mobiflight is a Freeware / Pay by Donate Software..... So it´s not possible for him to have a licensed expensive Forum Software.
(By the way my Moderator Tools are also verry poor. I just can delete and push topics or copy and Paste. Not possible to find topics of a special user or special time periode whatever with Admin Rights)

I already think the search problem is the length of words... For example it find no matches for "HDG" but lots of for "HEADING" ( Whatever "HDG" is used in that topics also hundrets of times)

Please appology for that.

About the 2 PMDG Lists.... If you have Problems just request with detailed information about nature of problem. then i will have a look.
Good Luck !
2018-05-29 09:13
Posts: 11
2018-06-05 20:35
Posts: 11
Work in progress :thumbup:
I ploughed through Events ( and offset mapping (
Once you understand this, setting the inputs and outputs is fun.
Thank you for the great program. I will support it.
PS.: The greatest joy I get from real landing gear signaling.... It is great :w00t: :lol: :rolleyes:
2018-06-16 16:06
Posts: 12
Good morning friends, can I use two mega arduino boards in Mobiflight? one board to do the MCP and another as the overend?
2018-08-06 04:44
From: EDDG, Germany
Posts: 1819
Hi claudio,

why did you post three times the same question in different topics? Just because you pull on the grass, it does not grow faster ...

Of course it is possible to integrate several MEGA modules as modules at Mobiflight.

All you have to do is load the firmware onto the boards, define your devices and then configure them for the devices. Remember to save the devices AND the configurations !!
Mobiflight loads the configurations at each startup and maps them to the modules.
Stephan (Time: UTC+1)
2018-08-06 09:52
Posts: 11
Hi friends B)
I bring another update. This time on A/T ARM vs. Magnetically Held Toggle Switches.
More on
2018-09-24 21:30