MobiFlight Community Support

Welcome to the forum for MobiFlight! Feel free to reach out to the community in case you have questions, issues or just want to share great ideas or details about your latest home cockpit project.

You like MobiFlight? Donate via PayPal and support the MobiFlight development. Thanks!

05/03/2024 - This forum is read-only

The community support for MobiFlight has moved exclusively over to our Discord server. Register for free and enjoy more interactive functions like image and video upload, voice chat. More than 7,000 registered users around the world make it a great experience!

See you on our MobiFlight Community Discord server.

A HUGE Thank You to everyone who participated in the forum, especially obviously to Pizman and Stephan who did an outstanding job over so many years providing an incredible service to the MobiFlight community.

The forum is still providing a lot of good content, hence we keep this information accessible.

Message #10247

ismailsurek37

Posts: 8

Hi All
i cant see ofset code for 7segment Course right side (FO) on MCP codelist
i am using it same code by Course L now...
is this problem solved before _?
Thanks

2018-09-19 13:11

Message #10250

StephanHo

From: EDDG, Germany

Posts: 1867

Supporter

Hi ismailsurek,

welcome to MobiFlight!

The two course displays in the MCP are not identical. The left one is for autopilot A and the other for autopilot B. You need this, for example. for an automatic landing. Therefore, you also need a separate offset for both.
If you'd written about which simulation and what plane you used, I could have called it both of you.

Grüße,
Stephan (Time: UTC+2)

2018-09-19 15:35

Message #10313

ismail3434

Posts: 9

hi

i need a separate offset for both yes...
Preapar V4 PMDG B737 - 800 but cant see effective Course B for FO side
https://www.youtube.com/watch?v=4l6lhGJZFcQ&t=90s

Thanks

2018-09-25 23:32

Message #10314

pizman82

Moderator

From: ETSI, Germany

Posts: 6010

Supporter

Hi

In the video i not see your configs... Pretty shure you read wrong Offset....

Quote:
Offset: 6520 .... Size: 4Byte .... Typ: WORD x 2 .... Name: MCP_Course(2)

this "x2" or (2) means THIS are TWO Offsets in a Row. "Word" Means its a 2 Byte Offset.
You see it have a size of 4 Byte... so it must be TWO "Words".

PMDG use this system multiple times... For Radio Stuff you often got "X3" offsets cause ther exist 3 Radio Panels in Cockpit.
Normaly logic is from Left to Rigth and from Up to Down.

In that Case the FIRST Offset is the Course Display CPT and the SECOND is the Course Display FO.

Use Offset 652O ..... 2 Byte INT for CPT Display..... And use 6522 .... 2 Byte INT for FO

Good Luck !

2018-09-26 00:06

Message #10472

ismail3434

Posts: 9

thanks you very much.. i have seperated them Course A and Course B by 6522

2018-10-14 17:05